scale modeling database | stash manager
stugiii
Ingmar Stöhr (stugiii)
DE

BB-62 USS New Jersey ca. 1984

Comments

29 30 April 2020, 19:37
Sven Schönyan
I´ll take a seat in the front row!
1 May 2020, 12:48
Ingmar Stöhr
You're welcome! I hope you brought enough beer and chips as this might take a while 😉
An please make sure you keep a safe distance of at least 1.5m.
1 May 2020, 15:16
Mike Kryza
Schau ich mir doch gerne an.
1 May 2020, 15:30
Acki
Bin auch gerne dabei, aber den Mindestabstand kannst Du vergessen. Da erkenne ich nichts mehr. 👍
1 May 2020, 15:55
Ingmar Stöhr
Willkommen an Bord!
1 May 2020, 20:31
Ingmar Stöhr
Progress on turret No.2
10 May 2020, 16:18
Ingmar Stöhr
Slow progress in the last days because of beautiful weather. Finally managed to finish No.2 turret
23 May 2020, 14:31
Ingmar Stöhr
A few days off and bad weather lead to some progress on this project. Pontos set misses some details and the resin parts are generally excellent. A few show more flash and other minor defects. But still a vast improvement over the kit parts.
17 June 2020, 07:42
Lochsa River
nice build...sitting in
17 June 2020, 07:46
Ingmar Stöhr
welcome on board!
17 June 2020, 07:56
Joerg R.
Hey Ingmar baut ein neues Schiffschebootsche, klasse 👍👍
17 June 2020, 09:30
Ingmar Stöhr
I managed to complete all the Armored Box Launchers and the Harpoon Launchers. I even put all my courage together and started the opened launcher from the Infini set. 83 PE parts, 5 turned brass parts, some plastic sheet an 6 hours was all it took to build an amazing tiny detail for New Jersey.
@Joerg: Herzlich Willkommen
19 June 2020, 19:21
Sven Schönyan
Very nice progress and good work on the launchers and funnel!
20 June 2020, 05:38
Łukasz Gliński
That Kaman looks like 1/144 or my 1/72 builds, respect! 👍
12 July 2020, 15:59
Ingmar Stöhr
Thanks a lot!
12 July 2020, 17:17
Treehugger
The smokestack work in photo 10 looks really nice I think. Fun to see others drilling out the holes in pipes and stuff. 🙂
12 July 2020, 17:21
Ingmar Stöhr
How can you not drill out all the pipes. That would be really insane 😉
12 July 2020, 17:25
Christian Bruer
I call it a promising start, excellent work so far Ingmar 👍
23 July 2020, 19:08
Ingmar Stöhr
Thank you Christian! I'm very glad to have you on board!
24 July 2020, 17:55
Ingmar Stöhr
Today it was time to finish the four Phalanx CIWS. The detail on the Pontos parts is absolutely breathtaking. A was with black oil and afterwards a careful dry brush with light grey and white is all that was needed.
26 July 2020, 13:44
Thomas Bischoff
Amazing level of details 👍
26 July 2020, 15:45
David Taylor
Im in.
26 July 2020, 16:12
Fly By Jan
wooooooooooowwww, this looks very exciting! I am following!
26 July 2020, 18:53
Ingmar Stöhr
Thank you mates!
26 July 2020, 19:14
Ingmar Stöhr
Finished the weapons platform for the aft. CIWS.
27 July 2020, 20:07
Ingmar Stöhr
Today I managed to complete all the 5 inch guns. The detail on the Pontos parts is superb! Only thing I had to change where the gun mantlets (not sure if that is what it's called for naval guns), as the Pontos parts are way to small.
2 August 2020, 11:26
Sven Schönyan
Great result!
2 August 2020, 11:45
Ingmar Stöhr
Finally some progress to show. I used the old Tamiya kit to replicate the SH-3 Sea King seen on board New Jersey in 1983. I added struts to the wheel sponsons an the fin on the tail boom. The MAD probe on the starboard sponson was made from styrene rod. The tail rotor is made from thin styrene strips. The main rotor came from my own Elegoo Mars SLA printer. The Tamiya rotors look more like bricks...
Most of the markings are hand painted to match the exact Sea King shown in a series of pictures from 1983.
2 September 2020, 20:01
Ingmar Stöhr
Upper superstructure with main mast and radars assembled, painted and weathered.
13 September 2020, 09:00
Sven Schönyan
Excellent paintwork! I like your highlighting!
13 September 2020, 10:49
Spanjaard
amazing job!!! the radar is fantastic. and i really like the SH-2 and Sea King
13 September 2020, 11:02
Ingmar Stöhr
Thank you Sven and Spanjaard.
13 September 2020, 17:54
Thomas Rieck
Moin Ingmar. Wie bekommst du auf dem letzten Bild dieses "verwaschene" Grau hin? Lackieren und dann? LG Thomas
23 March 2021, 09:14
Slavo Hazucha
Just found this project - fascinating work, so much attention to detail and an absolutely clean results - I really like your painting & weathering weathering too, you strike a great balance between macro & micro and a great scale impression result! 👍

- happy to jump on board mid-project 🙂
23 March 2021, 09:31
Ingmar Stöhr
Thank you Slavo! The project has been on hold for quiet a while now. But hopefully I will get back to it very soon.
23 March 2021, 12:42
Norbert Steffens
What I've seen looks fantastic. I predict that your USS New Jersey is going to be a excelent model
25 March 2021, 18:57
Ingmar Stöhr
Thank you Norbert! Now I have to live up to those expectations 🙂
27 March 2021, 06:00
Konrad -
Very nice Ingmar. Count me in here as well.
27 March 2021, 10:29
Lenny Hoffmann
Wahnsinn, weiter so
27 March 2021, 10:47
Stefan Fraundorfer
Das sieht alles unglaublich genial aus Ingmar. Super Bemalung und Alterung. Nur eine Kleinigkeit ist mir aufgefallen. Die untere Stiege im Bild 36 ist verkehrt angeklebt. Oder hat das einen bestimmten Grund?
9 April 2021, 20:53
Michael Osadciw
Wow. What a lot of detail. How do you like the 3D printer you have? I've been thinking of getting one for creating parts and hopefully full 1/35 scale figs once I get some more Blender sculpting knowledge under my belt.
9 April 2021, 22:02
Ingmar Stöhr
Thank you everyone!
@Stefan: Die Treppe hat es auf dem Fotor "nur" nach hinten umgebogen. Da ist schon alles richtig 😉
@Michael: I'm very happy with my Elegoo Mars. For around 250EUR it delivers very nice detail! I did a lot of modeling and sculpting in Blender the last months. Have a look at those two projects:
St. Mary's Church, Falklands April 1982 | Album by stugiii (1:350)
Lighthouse on Cliff 1/350 scale (3D printed) | Album by stugiii
18 April 2021, 16:41
Ingmar Stöhr
Today I was able to complete the main armament. Turret No3 also needed some modifications to resemble the prototype in the 1984 time frame.
18 April 2021, 16:44
Ed Batres
I'm curious, why are there handrails on the turrets? When would the sailors use them? How do they reach them? I'm primarily an aircraft builder, but appreciate great work. Thanks. Great attention to detail. Pleasure to see the work you do.
18 April 2021, 16:49
Ingmar Stöhr
Hi Ed, I'm not entirely sure, but most likely they would be used to secure a sailor with a rope when doing maintenance or some paint work. You find similar rails around the whole bridge, e.g. for cleaning windows or repairing something from the outside
18 April 2021, 17:07

Project info

46 images
1:350
In progress
1:350 USS New Jersey BB-62 (Tamiya 78028)1:350 USS New Jersey BB-62 1982 - Detail up set (Pontos Model 35008F1)1:350 BGM-109 Tomahawk Launcher (INFINI Model IMP-35017R1)5+

All albums

View all albums »