AMT GMC Astro 95

1
April 17, 2020
Completed at last!
2
January 5, 2020
My boy Santa came through for me! New project time!
3
January 5, 2020
Another set of custom printed decals, with appropriate part numbers, etc.
4
January 5, 2020
First things first...
5
January 18, 2020
Primer, powder blue undercoat, and Duplicolor Alpine green. Plus a heater set to low... it had been raining for about 48 hours by this point.
6
January 18, 2020
A second coat, after assembly, to really seal things up
7
January 18, 2020
Engine complete!
8
January 18, 2020
Presenting, the Detroit Diesel 8v71! My parents used to have a refrigerator that was this color...
9
January 18, 2020
A little glossier that I'd pick, but overall pretty satisfied. May still try to find a better looking alternator later in the build.
10
January 18, 2020
11
January 18, 2020
12
January 18, 2020
13
January 18, 2020
This was the whole reason I came... I guess I'll finish the rest of the truck now
14
January 27, 2020
Wheel complete too. It's great to finally see the color scheme in person. The colors are exactly what I wanted!
15
January 28, 2020
Always room for improvement, but I've come a long way from the the blue tape dark ages...
16
January 28, 2020
Testing masking methods and color contrast
17
February 10, 2020
Chassis assembled. Layering colors for a heat oxide effect on the exhaust.
18
February 15, 2020
Some better lighting to show the exhaust... photography-ing is hard
19
March 20, 2020
Sticky notes have been my go-to right-size prop blocks
20
March 20, 2020
21
March 20, 2020
22
March 22, 2020
Chassis complete!
23
March 22, 2020
Quick disclaimer, I did not deplate the fuel tanks and bumper at the beginning of the project with the other parts! Not my paint job!
24
March 22, 2020
25
March 22, 2020
26
March 22, 2020
27
March 22, 2020
28
March 22, 2020
29
March 22, 2020
30
March 22, 2020
31
March 22, 2020
32
March 22, 2020
33
March 22, 2020
34
March 30, 2020
Dare I use some of my precious bleach supply to dechrome these parts??
35
March 30, 2020
Soaking the parts in some tap water to pull out any residual bleach that may have soaked in
36
March 30, 2020
Laid down primer on the cabin components
37
March 30, 2020
Using Tesa tape for the carpet on the floorpan
38
March 30, 2020
Painting up the dash in layers
39
March 30, 2020
Instrument panels and dial faces were painted in around the raised bezels and switches
40
March 30, 2020
Completed Dashboard
41
March 31, 2020
Floorpan and interior components complete!
42
March 31, 2020
43
March 31, 2020
44
March 31, 2020
45
March 31, 2020
46
April 5, 2020
Another coat of the base color over the mask will hopefully give some cripser lines
47
April 5, 2020
The tape seems to have slipped on some of these bends, perhaps it's not getting enough traction on the layer underneath
48
April 5, 2020
Same problem on the rear of the cab to some extent
49
April 5, 2020
The louvers in the front of the cab didn't exactly help things...
50
April 5, 2020
Some difficulty around the features on either side of the cab, as expected. Maybe the mask is pulling away from sharp contours here as well
51
April 5, 2020
Likewise on the starboard side
52
April 5, 2020
But it did touch up nicely
53
April 5, 2020
A few hours with the one-haired brush and the optovisor was enough to clean up all the blemishes from the mask
54
April 5, 2020
55
April 5, 2020
56
April 5, 2020
57
April 17, 2020
A beautiful Detroit vista for the rearview mirrors
58
April 17, 2020
Wasn't feeling these steps that came with the kit... kinda wonky looking out of the mold. Last minute fabricobble job came out alright.
59
April 17, 2020
60
April 17, 2020
61
April 17, 2020
62
April 17, 2020
63
April 17, 2020
64
April 17, 2020
65
April 17, 2020
66
April 17, 2020
67
April 17, 2020
68
April 17, 2020
69
April 17, 2020
70
April 17, 2020
71
April 17, 2020
72
April 17, 2020
73
April 17, 2020
74
April 17, 2020
And for my next trick, I'll make the gearshift disappear!
75
April 17, 2020
76
April 17, 2020
Series 71 Power badging
77
April 17, 2020
78
April 17, 2020
79
April 17, 2020
80
April 17, 2020
Twanggg!
81
April 17, 2020

Comments

8 5 January 2020, 21:02

Tim Heimer
I have the same kit. I'll be watching.

5 January 2020, 23:57

Harold Driscoll
What's the metal tube for? Exhaust stack?

6 January 2020, 00:13

Brandon H
Yep! Gonna try something new this time around. Might also bend some pieces for the rest of the exhaust, we'll see how it goes.

6 January 2020, 15:02

Bozzer
I'll hop along for this.

6 January 2020, 15:58

Treehugger
I can recommend the Vallejo putty, much less obnoxious to work with than the Tamiya one.

6 January 2020, 16:12

Danny Meer
Taking a seat for this 1 🙂 Got the cabin of this 1 that came with same free parts

6 January 2020, 18:42

Bozzer
Welcome along good buddies. 10-4 and on the side😉

7 January 2020, 05:57

Brandon H
Testing some masking methods in #15... special thanks to @Chris Greathouse and everyone else who contributed to the discourse under his Super Boss project! Here I'm testing the Tamiya yellow masking tape and 2mm curvy tape. The left side (quadrants 1 and 4) received a second coat of the base color over the mask, and the right side (2 and 3) didn't. Then, the mask on the top two (1 and 2) was removed after about 15 minutes, while I waited two hours the bottom two (3 and 4). Q#1 seemed to pull up a lot of paint on the edges, while Q#3 allowed too much to bleed through. Q#4 is a bit out of focus, but trust me when I tell you it's downright crispy! I'm using aerosol paints here, your mileage may vary.

28 January 2020, 01:38

Bozzer
Tbh, I make my own tape stripes from normal masking tape. I think I know why it works so well now too. The process is simple. Lay tape on the cutting mat, mark out and cut with a #11 blade. So here's my theory. As it's already been stuck down, it loses a little tackiness, so less chance of paint peel. The other thing is, when cutting with the knife, I think it's giving me a slightly chamfered edge and a sharp fine edge too. I could be totally wrong, but it seems to work for me?

28 January 2020, 06:32

Brandon H
Makes sense, I would imagine it's critical to have as sharp a blade as possible to keep the edge free of fibers and small tears.

In Q#1 of my test, upon closer inspection, I found that the base color (white) used to seal the mask formed a crisp edge, and it was the top color (blue) that pulled extra paint away. Maybe the tackiness of the paint caused it pull away adjacent paint when removing the mask, where the edge broke more cleanly once dry to the touch. Whatever causes it, it's the opposite result from what I'd expect. Hopefully I'm not looking at the test piece upside down....

28 January 2020, 14:01

Brandon H
Some better lighting on the finished exhaust pipes

15 February 2020, 20:48

Brandon H
Finally, a chance to catch up on things! Home stretch for chassis!

20 March 2020, 22:46

Bill Newcomer
I missed this one. Following.

28 March 2020, 03:07

Tim Heimer
Looking good Brandon!

28 March 2020, 03:42

Mark Boots
I love the engine details. Good colours too!

28 March 2020, 06:56

Bill Newcomer
Brandon, I have two suggestions for you. One you can still do now and one you can do on your next build. The 1st suggestion is to add a green "Suzie coil" for the electrical connection to the trailer. The 2nd is to stuff some window packing rod into the tires to hold the tire bead against the rim.

Freightliner COE day cab DD (Double drive) | Album by musclecarfan (1:25)

Freightliner COE triple drive | Album by musclecarfan (1:25)

28 March 2020, 20:07

Brandon H
Thanks guys!

Bill, don't know how I missed that, electrical hook up coming soon! And I'll definitely look into that for the tires. Don't know if I'll get these tires back over the rims without breaking something else, but I'll keep it in mind for future projects. What I really should've done for this project is buy one of those Italeri or Mobius tire sets, the ones in this kit seem much too thin. Glad someone's looking as closely as I usually do!

29 March 2020, 00:09

Bozzer
Oh, I'm watching too, don't worry! I'm gonna get myself one of these. I'm not a massive cabover fan, but if it's American, I'm in! Currently I have too many builds on the go, but another in the stash won't hurt. Rock on brother 👍

29 March 2020, 02:03

Brandon H
Rapid progress amid the statewide shutdown... finally making long strides between conference calls and at-home paperwork!

31 March 2020, 17:58

Tim Heimer
Great looking interior!

31 March 2020, 17:59

Rafael Lang
great details inside!

31 March 2020, 19:59

Bozzer
Awesome job on that dashboard and tub mate. I know how hard these things are, from experience. I gotta admit, doing it properly takes up a lot of time, but looks much better than decals. I take my hat off to you sir, well done!

31 March 2020, 22:05

Bill Newcomer
High quality work on the dash. It seems such a shame it gets hidden on the final product. However, WE appreciate your efforts.

31 March 2020, 22:15

Brandon H
Haha thanks guys! I'm sure you'll agree, just knowing the details are there makes it all worth it. Stay safe y'all!

31 March 2020, 23:38

Brandon H
One of these days I'm gonna get a real camera... and some real lights...Hope y'all like it though! Stay healthy out there!

17 April 2020, 19:29

Danny Meer
Really looks stunning! love the colors and details in cab 👍

17 April 2020, 19:29

Brandon H
Thanks Danny!

17 April 2020, 20:06

Tim Heimer
Beautifully done Brandon! I love it!

17 April 2020, 20:42

Mark Boots
cool! I like it. Well done.

18 April 2020, 05:09

Rafael Lang
wow! looks stunning!

18 April 2020, 06:14

Brandon H
Thanks all! Had a lot of fun building this one up.

18 April 2020, 15:23

Neuling
Good build!

18 April 2020, 16:17

Jarrett
Awesome build!!! Love the vibrant colors.

3 December 2021, 15:49

Jarrett
One quick question... I have read there are many ways to strip the chrome parts without seeing the results and on photo #4 that looks effortless so can you share that concoction?

3 December 2021, 15:50

Brandon H
Thanks! 1970's cars and trucks had much nicer color choices! For dechroming, I used concentrated bleach here. It worked well in this case, but results can vary based on the kit manufacturer. Many products can easily remove the chrome, but the conductive lacquer underneath (used for electroplating) can sometimes be much tougher. I've had other parts with lacquer much to stubborn for bleach. "Totally Awesome" and "Purple Power" (both concentrated degreasers) have done well for me in other cases.

3 December 2021, 17:55

Jarrett
Brandon thank you for the response and detailed information!

3 December 2021, 18:49

Nigel Chapman
Nice build. Cab over trucks have a certain charm about them.

3 December 2021, 19:14

Brandon H
Agreed! It's a shame we don't get to see too many of them here in the States anymore :/

3 December 2021, 20:29

Project info

Project G

81 images

1:25

Completed

1:24 Semi Truck Tail Lights (Czech Truck Model CTM 24119)

1:24 Hose Clamps (Czech Truck Model CTM 24072)

All albums

View all albums »