scale modeling database | stash manager
worldinscale
Christian Meyerhoff (worldinscale)
DE

Supermarine S.6B

Comments

8 6 May 2015, 17:44
Christian Meyerhoff
First steps...
6 May 2015, 17:45
Christian Bruer
Nice start on these old kit!
6 May 2015, 19:16
Christian Meyerhoff
Thank you Christian!
This kit is not that bad. Lot off cleaning, but well detailed for an +50 year old kit.
6 May 2015, 19:32
Hanno Kleinecke
Oho, los, geht's ! This kit is a lot more detailed than the Airfix one, I'm curious on this one Christian !
6 May 2015, 19:48
Christian Meyerhoff
THX Hanno! FROG did a good job on this one. I hope that I don`t mess it up.
7 May 2015, 05:46
Kerry COX
Be careful of the plastic as it may have become extremely brittle 🙂
7 May 2015, 06:32
Christian Meyerhoff
Thank You Kerry😉
7 May 2015, 06:39
Holger Kranich
I know that you are a masochist, Christian, but this one? Really? But ok, i have a coffee and some bisquits, hang in there, i´ll watch this for sure!
7 May 2015, 08:58
Christian Meyerhoff
Always welcome Holger!
7 May 2015, 12:48
Christian Meyerhoff
Hi everybody!
Some small progress... Rigging will be the next step before painting. This little kit is pure fun!!!
9 May 2015, 18:14
Hanno Kleinecke
And it looks great ! 👍
9 May 2015, 18:34
Christian Meyerhoff
Ich danke Dir Hanno! Schau mal am Dienstag wieder rein, dann sollte das fertig sein.
9 May 2015, 18:40
Hanno Kleinecke
Freu mich drauf Christian !Der Bausatz is doch um einiges besser als der alte von Airfix. ich ärgere mich ein bisschen, habe den Pavla Bausatz der nicht mehr zu kriegen war, im Aviation Megastore verfügbar gesehen.......
9 May 2015, 18:45
Mike Kryza
Schon erstaunlich was Du dir hier antust... 👍
9 May 2015, 18:48
Christian Meyerhoff
🙂 Das Ding läuft wie geschittenes Brot... " Ich bin der " Meister Eilig" und was nicht passt das feil ich ... 🙂
Nö, mal ehrlich, das ist ein kleiner aber feiner Bausatz.

@ Hanno: Den Palva Kit hätte ich auch gerne.
9 May 2015, 18:59
Hanno Kleinecke
2 davon haben sie noch. Ist aber nicht ganz billig, die Kleine...... aviationmegastore.co..t_id=0&art=93559
9 May 2015, 19:05
Christian Meyerhoff
@ Hanno: Danke Dir für den Link. Ist aber wirklich zu teuer. Ich habe für mein Geraffel gerade mal 4€ bezahlt. FROG Kits kennt ja auch fast niemand mehr der jünger als 50 Jahre ist.
9 May 2015, 19:24
Mike Kryza
Wow - Christian, sind wir schon soooooo alt??? Ich glaube dazu haben wir noch viel zu vile Sch..... im Hirn -- und einen viel zu großen Stash...😉
9 May 2015, 20:19
Mike Kryza
Ähhhh - wollte sagen "Blödsinn" - 👍
9 May 2015, 20:20
Christian Meyerhoff
Mike.. Willkommen in der Altersgruppe Plastikmodellbau. Mit der ganzen Sch... im Hirn kann ich Strassen pflastern und mein Stash reicht eh bis 2060. Also machen wir doch einfach so weiter. Hat bis jetzt Spaß gemacht und wird sich auch nicht ändern. 🙂
9 May 2015, 20:32
Kerry COX
Christian, again, an other sterling job so far, and I am curious.:-O How was the plastic after all these years. ?

Cheers.
9 May 2015, 21:31
Christian Meyerhoff
Hi Kerry! Thank you! The plastic was fine, even after all thoese years. No problems at all.
10 May 2015, 08:02
Christian Bruer
Very nice and convincing progress Christian!
Hehe, Altersgruppe Plastikmodellbau🙂 Schlimm wird es erst ab Selbsthilfegruppe😉
10 May 2015, 08:29
Kerry COX
Thanks Christian, Good to know. 🙂
10 May 2015, 08:43
Holger Kranich
Kleber auf Rädern!😢 LOL
10 May 2015, 09:58
Christian Meyerhoff
Rigging Time!
For the wings I used EZ-Line, the floats were rigged with 0,45mm brass wire. Time to paint now.
10 May 2015, 13:30
Hanno Kleinecke
Na, das flutscht ja ! Bin mal gespannt wie Du das mit dem Abkleben machst,,unter der Verspannung. Ich hab mich das nicht getraut, und die Verspannung hinterher gemacht. Bei der Macchi weiß ich noch nicht wie ich vorgehen soll......
10 May 2015, 19:32
Christian Meyerhoff
Danke Dir Hanno! Da die Verspannung aus Gummifaden ist kann man beim abkleben ruhig mal daneben greifen. Das tut der Verspannung nix 🙂 Lackieren werde ich den Vogel wie folgt: Grundierung Humbrol No.1 um das eine oder andere Fehlerchen zu beheben , dann glänzend schwarz über Alles. Blau da wo das muss, dann abkleben und den Rest in Alclad Silber. Klarlack drauf und fertig... Das ist der Plan, genug Potenzial das Ganze zu versemmeln ist aber auch noch vorhanden. 🙂
10 May 2015, 19:42
Hanno Kleinecke
Klingt nach nem guten Plan ! Stimmt die EZ Dinger sind ja flexibel, gibts die auch für 1/48 passend ?
Gutes Gelingen !
10 May 2015, 19:50
Christian Meyerhoff
EZ- Line gibt es in verschiedenen Stärken. Geht eigentlich für alle Maßstäbe.
10 May 2015, 19:58
Kerry COX
The alclad will be fantastic mate
10 May 2015, 21:22
Christian Meyerhoff
Started with the paint job.
12 May 2015, 16:48
Hanno Kleinecke
Blackbird ! 😄
12 May 2015, 17:47
Christian Meyerhoff
Yep!😉
12 May 2015, 18:34
Christian Meyerhoff
@ Kerry: I hope so. It`s the first time I use this stuff.
12 May 2015, 18:39
Christian Meyerhoff
Next step: Some Xtra color blue on.
14 May 2015, 17:50
Clifford Keesler
Looing very nice Christian.
14 May 2015, 17:55
Christian Meyerhoff
Many THX Clifford😉
14 May 2015, 17:58
Christian Meyerhoff
Painting is nearly done. Some final bits and pieces to add.
16 May 2015, 09:40
Kerry COX
Looking something special Christian. 🙂 A most impressive look.;_)

WARNING. !!! Do NOT handle with bare hands. Use cotton gloves.
16 May 2015, 10:06
Christian Bruer
That looks shiny🙂 Well done Christian!
16 May 2015, 18:55
Christian Meyerhoff
Many THX mates ! Meanwhile some decals were be added and the Alclad paint was sealed. I think that tomorrow this one will be done.
16 May 2015, 19:01
Christian Bruer
Looking forward to the finished one🙂
16 May 2015, 19:02
Christian Meyerhoff
@ Christian: Und ich erst... 🙂 Das glaubst Du ja gar nicht... Ich denke morgen wird das was.
16 May 2015, 19:06
Christian Bruer
😉
16 May 2015, 19:12
Steve -
Christian
Well done both building and painting.👍
As I am not so bright because I could not figure out why your painted it blue and then painted Alclad over it - then I enlarged the pictures and WOW! 😮
Great Job! (it was the colour of the cutting matt that through me off. 😄)
16 May 2015, 20:04
M.Julian Marles
Impressive! Is the "gold token" still valid, ha ha!😉
16 May 2015, 21:07
Kerry COX
It was a winner in it's day, just like this is a winner here.

Some eye candy Christian. 🙂

Very well done mate, and, now you know how to use alclad..........................look out folks 🙂
16 May 2015, 21:46
Hanno Kleinecke
Oh boy, that' s what I call shine ! Beautyful Christian !
16 May 2015, 22:43
Christian Meyerhoff
Many thanks for your kind words mates!
17 May 2015, 08:15
Christian Meyerhoff
Finished !
17 May 2015, 10:46
Kerry COX
S T U N N I N G ! ! !

Just wonderful Christian, and take a bow mate. 🙂
17 May 2015, 10:50
John Young
Top notch! Very skillful finish with the painted and bare metal surfaces.
17 May 2015, 12:23
Christian Meyerhoff
Many thx John!
17 May 2015, 13:09
Christian Bruer
Wonderful finish and some atmospheric photos, well done Christian!
17 May 2015, 14:44
Hanno Kleinecke
Beautyful little racebird, well done Christian !
17 May 2015, 16:15
Christian Meyerhoff
Many thx mates! This is motivation!
17 May 2015, 16:58
Christian Ristits
Was für ein schönes Modell, gratuliere dir Christian!
17 May 2015, 17:54
Christian Meyerhoff
Danke Dir Christian! Ich hätte nie gedacht das ein so alter Frog Kit so viele positive Kommentare auslöst. Es freut mich wirklich das dieses alte Modell so Vielen gefällt 🙂
17 May 2015, 18:07
Christian Bruer
Es kommt ja nicht auf den Bausatz an, sondern auf das was man daraus macht😉 Und das ist wie schon gesagt erste Sahne!
17 May 2015, 18:12
Burkhard D
Having the same kit in work for a few years, I still wonder whether the two horizontal struts between the floats should be there or not. Can anyone point me to an image that shows these two struts?
17 May 2015, 19:25
Christian Meyerhoff
Hallo Burkhard!
Ich glaube das diese "Streben" zwischen den Schwimmern eigendlich Verspannungen aus Flachstahl waren. Beim Frog Bausatz sind sie völlig überdimensioniert, aber vom Querschnitt her richtig. Ich denke das haben die "Frogs" damals so gemacht um den Bau des Modells zu vereinfachen. Schau mal hier:
primeportal.net/hang..ermarine_s.6b_s1595/
Da sieht das doch anders aus.
17 May 2015, 19:35
Burkhard D
Super, danke. Da treibe ich mich ewig auf Prime Portal herum,a ber den Walkaround dr S6B habe ich verpennt. Deine Deutung macht Sinn, andernfalls wäre der Bausatz nur mit Hilfe einer Jig hinzubekommen. 🙂
17 May 2015, 19:41
Christian Meyerhoff
Also keine Entschuldigung mehr das Teil nicht zu bauen 😉
17 May 2015, 19:47
Burkhard D
🙂
17 May 2015, 22:01
Agrippa
sehr sehr schönes Modell!!!!!!
13 September 2023, 11:09
Rui S
A hidden Beauty 👍
16 September 2023, 12:10
Clifford Keesler
Very nice sir.
17 September 2023, 00:29
Kerry COX
FROG. ! Guaranteed, the mold die was carved by hand. Tool makers. The type of trade that used to be practiced in the production of coins and many medals. And the result. ? Perfect in every way. 👍
17 September 2023, 20:29
Kerry COX
Burkhard D. I found this old film of the same aircraft and you may see the answer to you qerie in the vision. (I Hope). Youtube Video
 
18 September 2023, 19:36

Album info

Golden Oldie from famous FROG

All albums

View all albums »