scale modeling database | stash manager
Lerxst
Andy Ball (Lerxst)
GB

Typhoon 4-Blade

Comments

53 25 September 2021, 16:59
Andy Ball
As I'm currently out of action with the hobby room build, and on a warm Saturday afternoon I picked this kit up out of my stash and thought, why not?
26 September 2021, 07:59
Łukasz Gliński
I felt I've been missing something 😉
27 September 2021, 18:02
Andy Ball
Hey, hello Ł !…l'm trying to keep moving ahead with builds. I've now got too many on the go. Once the hobby room is complete, (it'll be 5.5x2.5m with heating and insulation), there will be no stopping!
27 September 2021, 23:20
Cuajete
I take a seat 😛
28 September 2021, 18:30
Bas Tonn
do you mean the tail reinforcement with 'fishplates'? i sense some scratchbuilding in the air...
30 September 2021, 18:52
Mark K
Watching
30 September 2021, 19:57
Mark
👀
30 September 2021, 20:09
Andy Ball
@Bas: yes, I guess I will need to fashion something of a tail reinforcement- I think there may be an aftermarket out there?….
30 September 2021, 22:08
Andy Ball
Thanks and most welcome Cuajete, Mark, Mark K. Glad to have you on for the ride!
30 September 2021, 22:09
Thomas Kolb
Following!
7 November 2021, 07:49
Andy Ball
Thanks Thomas, glad to have you along for the show
7 November 2021, 09:04
Juergen Klinglhuber
watching too
13 November 2021, 11:25
Andy Ball
cheers Juergen, as soon as I am able I will start this and the many other builds!....
15 November 2021, 15:37
Guy Rump
Following with interest, hopefully you'll be able to continue soon. 👍
29 December 2021, 19:32
Neil Patrick
Hi Andy. Great start. I reckon you'll soon whizz past me as I grapple with rockets and the wheel wells on mine...the Brengun wells and cockpit put the Airfix one to shame. 👍
29 December 2021, 20:33
Andy Ball
@Guy, thanks again for your interest- am reacquainting myself with the Braille scale.
30 December 2021, 08:55
Andy Ball
@ Neil: like you I am a meandering hobbyist- this build may not go in a straight line!
30 December 2021, 08:56
David Taylor
The later typhoons had the flutter solved so did not have the fishplates,I suspect if you are doing the later 4 blade without said plates should be OK.
30 December 2021, 17:34
Andy Ball
Thanks David.I'm going to check a reference or two as their tails were dependent upon Hawker/Gloster made machines and the serial number/batch. I don't want to descend into that "rivet-inspector" pit of deliberation! 🙂
31 December 2021, 15:02
David Taylor
If the engine has two sets of exhausts it's a Tornado HNY.LOL
31 December 2021, 19:37
Andy Ball
Hope you had a good one, David!
2 January 2022, 22:41
David Taylor
Cheers Andy,quiet.Started on a retro 16 scale Beetle Back to WW2 fit.
2 January 2022, 23:17
Andy Ball
@David: Sounds eclectic!!
3 January 2022, 21:58
David Taylor
I like my big scale vehicles but mainly RAF/FAA.Got a collection of Luftwaffe bombers as well.
4 January 2022, 14:41
David Taylor
Looks a very basic kit Andy.
6 January 2022, 18:10
Andy Ball
@David as a small manufacturer Brengun may not mix it with the big boys, but the kit has it's detail-merits. I read Hyperscale's review and was forewarned about some of the accuracy issues. There are some similar pitfalls with Airfix's offering too I believe
6 January 2022, 19:38
Neil Patrick
That's a brave move on the anti-shimmy tailwheel Andy. I wanted to do the same as you, but chickened out! Looks great!
9 January 2022, 10:54
Andy Ball
Ah Neil, I see you did some great trickery with your painting!!… I think both manufacturers should have addressed that small, but significant issue!
9 January 2022, 22:19
Charlie Spitfire
very nice i have a airfix one and am looking forward to it
12 February 2022, 06:48
Andy Ball
I think Airfix have a great product there too, charlie. Thanks for the compliment!
13 February 2022, 12:57
Guy Rump
Looking good Andy 👍
13 February 2022, 13:09
Andy Ball
Chugging along @Guy!!….(not as prolific as you presently!!)
13 February 2022, 22:28
Daniel Klink
Respect Andy..Great progress and work so far on this....kits!:9
I must admit iam totally disappointed by the quality of th kits. got the early types in my stash and modular is already often critical with injected parts but with short run kits...
Therefore i think iam out but iam very interested in your progress and perhaps you can change my mind with your result 👍

13 February 2022, 22:36
Andy Ball
cheers Daniel, the quality of the moulds is OK, although I know Academy and Airfix offer some good alternatives. On Hyperscale they reviewed a few of them and actually concluded that Airfix and Brengun were almost at points-drawn. So far the physical fit has been pretty good, and I'd say the surface textures are good for 72nd. Inaccurate markings and the need to do surgery for the broad-cord "Tempest" tail planes are the biggest irritators. Hope to post more, soon....stay tuned!
14 February 2022, 15:14
David Januska
Taking a seat, great job on the hard kit.
16 June 2022, 12:21
Łukasz Gliński
Haven't lurked here for a while, but I have to say I like your camo more than mine 🙂
16 June 2022, 13:50
Cuajete
Nice progress, Andy 👍
16 June 2022, 18:11
Neil Patrick
Nice to see this back on the bench Andy. Looking good as you approach the final furlong. Reminds me my Airfix job is due for resurection. I too invested in the Master cannon barrels, so be good see them in situ on your build. What a clever idea to do a wing and fuselage prepaint before assembly.
16 June 2022, 22:37
Gordon Sørensen
Looks good, Andy! The Typhoon with 4-bladed prop looks a proper Beast! Looking forward to more progress.
17 June 2022, 00:51
Guy Rump
Looking good Andy, I like the black and white stripes under the fuselage and the gray looks very impressive. 👍
24 June 2022, 18:36
Cuajete
I agree with mates 👍
24 June 2022, 19:51
Andy Ball
Hello to David, Łukasz, Cuajete, Neil, Gordon and Guy. Honoured to have your comments on my 'tricky' build. The kit is nearly done, and has built into something Typhoon-like! I think the amount of after-markets helped, but not sure if I'm the scheme of things it's really made a huge impact. Hopeful about another 3-4 hours will suffice!
24 June 2022, 20:27
David H
Still struggle to believe this is 1/72. It's so well done, congrats !👍🏻
24 June 2022, 20:46
Andy Ball
Thanks David, I bet there are fewer 'swear words' in 48th?….
24 June 2022, 21:06
Thomas Bischoff
I join for the final yards … turns out great. Pre-shading in pic 34 worked fine 👍.
25 June 2022, 04:13
Andy Ball
Thanks Thomas, needing to repeat shading on uppers, panel line wash etc. before I declare touchdown
25 June 2022, 07:59
David Taylor
Nice to see a bomb load rather than rockets Andy.
25 June 2022, 10:06
Andy Ball
And easier to make too, (if you don't mind the intricacies of Eduard's bombs…5 parts per bomb and 4 decals on each)
25 June 2022, 10:27
John Ballman
Nice work, Thanks for sharing this.
JB
19 July 2022, 15:54
Andy Ball
@John: thanks for the comment - there are a lot of excellent Airfix projects on here. I wanted to do the Brengun kit the best I could. With a little more work, (I guess), it too can come out pretty Typhoon-like.
19 July 2022, 16:12
John Ballman
Yes, I have the AFX kit, it compares favorably to the superior Brengun kit. Your doing this justice.
JB
19 July 2022, 16:17
Andy Ball
@JB: there's been a lot of debate about the better 72nd Typhoon offering including Academy. I can only call it as I see it, but Brendgun seems a finer moulded kit, and seems sleeker in profile, perhaps? Anyways I appreciate the recognition!
19 July 2022, 16:24
Cuajete
Top job, Andy! Lovely 4-Blade 👍
Congrats!
19 July 2022, 17:40
David Taylor
Smart.
19 July 2022, 18:22
Łukasz Gliński
Lovely! Great weathering 👍
19 July 2022, 18:38
Andy Ball
@Cuajete- many thanks, I feel I've learnt and improved techniques in a few areas.
19 July 2022, 19:17
Andy Ball
@David- thanks again for looking in!
@Łukasz- finally over the line! I've gone with oils this time to see what I could do….
19 July 2022, 19:18
Łukasz Gliński
The oils turned out extremely well A.
19 July 2022, 19:38
Andy Ball
@Ł I feel I get more control out of them rather than pre- and post- airbrush shading.
19 July 2022, 20:10
Vincent
Very nice result. Great work!!!
19 July 2022, 20:58
Neil Patrick
Looks great Andy. Perfect weathering too, very dirty but subtle too. Definitely the best 1/72 Typhoon on Scalemates. Congrats!
19 July 2022, 21:23
Andy Ball
@Vincent, thanks for the comment! Loved your projects too!
19 July 2022, 21:56
Andy Ball
@Neil: heheh, I'm sure yours will raise the bar again!!
19 July 2022, 21:57
Neuling
Top notch. Excellent weathering, especially on the underside of the aircraft!
20 July 2022, 08:10
Andy Ball
thanks Neuling, yes I'm especially pleased with that....the smoke streaking exhausts area I need to change my approach..
20 July 2022, 08:37
Guy Rump
Very nice build Andy, congrats. 👍
20 July 2022, 14:41
Andy Ball
Thanks Guy, always good to know you've had a look - appreciate the words.
20 July 2022, 16:56
Peter de Bruin
Well done Andy! Looks marvelous ☺️
21 November 2022, 17:47
Andy Ball
Thanks baracudaz for a peek at the work!
21 November 2022, 22:50
Andy Ball
Thanks Peter, my humble homage to Canadians fighting on Dutch soil - well mainly mud!
21 November 2022, 22:53
Andy Ball
Thanks Pietro!
22 November 2022, 00:32
Andy Ball
Cheers Bernd!! Great kit y'know!
22 December 2022, 23:10
Andy Ball
Thanks David!!
22 December 2022, 23:39
Andy Ball
Airjuneau….thanks/danke
23 December 2022, 00:00
Andy Ball
Cheers/grazie Moreno,
23 December 2022, 16:07
Andy Ball
Thanks R K
23 December 2022, 23:31
Andy Ball
Thanks Diego DH, super kit albeit a test, and test again , kit!
23 December 2022, 23:38
Andy Ball
Cheers, John!
24 December 2022, 03:21
Andy Ball
Curatorm, merci
24 December 2022, 08:28

Project info

53 images
1:72
Completed
1:72 Hawker Typhoon Mk Ib (Brengun BRP72004)1:72 Hawker Typhoon Mk IB late type cannons with covered barrels (Master AM-72-065)1:72 Hawker Typhoon Mk.1B (Xtradecal X72179)2+
Hawker Typhoon Mk.Ib (late)
CA Royal Canadian Air Force - Aviation royale canadienne (1924-1968)
440 Sqn. MP149 / I8-P PULVERIZER II
December 1944 - B.78 / Eindhoven NL
Dark Green-Ocean grey, Medium Sea grey
 

All albums

View all albums »