Wall
Wall
23 images
A pic of the canopy. There where some requests on the quality respectively the fit.
To me this looks quite good.
Project: Messerschmitt Me 262
12 | 4. January, 12:59
View full thread (30 Comments) 
Juergen Klinglhuber
Added one more pic before I need to undergo the next paint job on the landing gear and wheel bin. Hope to close the fuselage soon.
Added one more pic before I need to undergo the next paint job on the landing gear and wheel bin. Hope to close the fuselage soon.
26. January, 19:29
Skywalker
Juergen, how is your canopy? I had a terrible canopy when I did this kit. Eventually I will have to replace it with a vacuform.
Juergen, how is your canopy? I had a terrible canopy when I did this kit. Eventually I will have to replace it with a vacuform.
26. January, 19:34
Juergen Klinglhuber
@Skywalker - added pic #23; it looks that my kit contained a quite ok canopy.
@Skywalker - added pic #23; it looks that my kit contained a quite ok canopy.
27. January, 18:52
Skywalker
Wow, you got lucky... Everyone I know who has this kit has canopy problems. Mine was so thin on one side that it cracked and the shape didn't fit on the fuselage. I wonder if they updated the clear parts? This is turning out to be a great build!
Wow, you got lucky... Everyone I know who has this kit has canopy problems. Mine was so thin on one side that it cracked and the shape didn't fit on the fuselage. I wonder if they updated the clear parts? This is turning out to be a great build!
27. January, 19:00
Spanjaard
cockpit seems quite ok in the picture.
but afer looking at mine, i got a couple of vacuformed ones for my two 262's....
cockpit seems quite ok in the picture.
but afer looking at mine, i got a couple of vacuformed ones for my two 262's....
27. January, 21:16
January 26, 2021
67 images
Made my own stops and after several attempts I found it ok to use glue. Picture comparision showed later that the whole ...
Project: #P18 CASA CN-235
18 | 4. October 2020, 19:45
View full thread (31 Comments) 
20. January, 19:04
Juergen Klinglhuber
a little bit of an update on this build - I joint tail and horzontal fins with the fuselage and did some scribing exercise.
a little bit of an update on this build - I joint tail and horzontal fins with the fuselage and did some scribing exercise.
20. January, 19:06
20. January, 19:49
Łukasz Gliński
Have you considered filling the parts, so they get stiff? Like here:
Breguet Br. Bizerte | Album by potez452 (1:72)
Have you considered filling the parts, so they get stiff? Like here:
Breguet Br. Bizerte | Album by potez452 (1:72)
21. January, 15:49
Juergen Klinglhuber
and...OMG! potez452's documation is great.
and...YES. I thought about filling them. But I was not sure what material will make it stiff but not too heavy. As my Tamiya putty was eating away the styrene in the areas where i used it to support the bulkheads that I put into my craft ...I gave up this idea. I will check what potez452 use, may quite useful for the wings...THANKS
and...OMG! potez452's documation is great.
and...YES. I thought about filling them. But I was not sure what material will make it stiff but not too heavy. As my Tamiya putty was eating away the styrene in the areas where i used it to support the bulkheads that I put into my craft ...I gave up this idea. I will check what potez452 use, may quite useful for the wings...THANKS
21. January, 20:30
26. January, 19:45
January 17, 2021
January 16, 2021
January 14, 2021
January 13, 2021
5 | 22. October 2020, 17:54
Spanjaard
beautiful. applying those decals must have been lots of fun. they look great
beautiful. applying those decals must have been lots of fun. they look great
13. January, 21:31
13. January, 22:12
January 11, 2021
January 7, 2021
January 6, 2021
January 5, 2021
101 images
Head of the new decal film applied....it went on pretty well.
Mishap recovered. ;-)
Project: #P17 Pilatus PC-7 Turbo Trainer
2+
2+ 9 | 25. November 2019, 20:58
View full thread (37 Comments) 
Juergen Klinglhuber
Hi Stefan. Tricky kits those two ...But I'm motivated to get the best out of it. Only limited by my skills.....on the other hand I learned alot during this build (keyword -Future & Gunze; amongst others...)
Hi Stefan. Tricky kits those two ...But I'm motivated to get the best out of it. Only limited by my skills.....on the other hand I learned alot during this build (keyword -Future & Gunze; amongst others...)
21. November 2020, 14:05
Juergen Klinglhuber
A mishap - I have to reconsider how to proceed now. TheGold of the decal didn't entirely cover the orange layer.
A mishap - I have to reconsider how to proceed now. TheGold of the decal didn't entirely cover the orange layer.
29. November 2020, 17:11
Gordon Sørensen
Great job on the masking of the blue! Not any easy looking job, either.
Great job on the masking of the blue! Not any easy looking job, either.
5. January, 12:09
Juergen Klinglhuber
Thx, Gordon & Lukasz - I was a bit wary and unconfident on how to fix that issue for the last couple of weeks. But - nothing ventured, nothing gained. I'm lucky that this LH side went quite ok. Tackling the other one asap.
Thx, Gordon & Lukasz - I was a bit wary and unconfident on how to fix that issue for the last couple of weeks. But - nothing ventured, nothing gained. I'm lucky that this LH side went quite ok. Tackling the other one asap.
5. January, 13:32
Wehrmacht Luftwaffe (German Air Force 1935-1945)January 4, 2021
Scalemates Schwalbe Group build 2021
1. January until 31. December 2021
4. January, 12:58
January 2, 2021
January 1, 2021
December 28, 2020
December 21, 2020
December 19, 2020
German Submarine Deutsches U-Boot VII C "Wolf Pack"/"Die grauen Wölfe"
Revell 1:72
05015 (80-5015)
+Revell 1:72
05015 (80-5015)
2003 | New tool
19. December 2020, 14:33
December 18, 2020
SAAB 35 Draken (mid and late versions) - Pitot Tubes & Angle Of Attack probe
Master 1:72
AM-72-055
+Master 1:72
AM-72-055
2013 | New tool
18. December 2020, 19:19
SAAB 35 Draken (mid and late versions) - Pitot Tubes & Angle Of Attack probe
Master 1:72
AM-72-055
+Master 1:72
AM-72-055
2013 | New tool
18. December 2020, 19:19
December 12, 2020
December 7, 2020
11 | 28. March 2020, 20:54
View full thread (15 Comments) 
Juergen Klinglhuber
Gents - I know that some of you have that bird on stash and thinking about to start glueing. So here some experience I made: decals went on pretty easy, but the instructions show some typos. So make sure you cut per "picture" and not per number shown. Plus: Check twince upfront decaling the vertical tail fin - you need to put some alu paint on the housing of the tailrotor drive. All the other decals have it printed on the sheet. The "R" on the brand name comes without - I have no clue why(?). See picture above - 2/3 of the black bubble you see there needs to be painted upfront decaling.
Gents - I know that some of you have that bird on stash and thinking about to start glueing. So here some experience I made: decals went on pretty easy, but the instructions show some typos. So make sure you cut per "picture" and not per number shown. Plus: Check twince upfront decaling the vertical tail fin - you need to put some alu paint on the housing of the tailrotor drive. All the other decals have it printed on the sheet. The "R" on the brand name comes without - I have no clue why(?). See picture above - 2/3 of the black bubble you see there needs to be painted upfront decaling.
25. June 2020, 18:06
Stefan Fraundorfer
Super Ergebnis Jürgen! Deine Cobra gefällt mir sehr gut. Weißt du übrigens was aus dem Original nach dem Unfall geworden ist?
Super Ergebnis Jürgen! Deine Cobra gefällt mir sehr gut. Weißt du übrigens was aus dem Original nach dem Unfall geworden ist?
22. October 2020, 17:55
Juergen Klinglhuber
Danke, Stefan.
Leider tut sich da gar nichts - das letzte was ich hörte war das "Blacky" Schwarz meinte dass sie repariert werden sollte. Allerdings ist das 2017 gewesen - seither Funkstille. Wäre schade darum,......
Danke, Stefan.
Leider tut sich da gar nichts - das letzte was ich hörte war das "Blacky" Schwarz meinte dass sie repariert werden sollte. Allerdings ist das 2017 gewesen - seither Funkstille. Wäre schade darum,......
22. October 2020, 18:03
December 5, 2020
1:72
Ideas
5. December 2020, 19:19
Roland Sachsenhofer
Ein schönes Vorhaben! Ich bin gespannt dabei und wünsche gutes Gelingen!
Ein schönes Vorhaben! Ich bin gespannt dabei und wünsche gutes Gelingen!
5. December 2020, 19:32
Juergen Klinglhuber
Servus Bernd, tja- etwas Geduld müsst ihr noch aufbringen hab aktuell zuviel gleichzeitig laufen. Ich hab vor >10 Jahren schon mal eine Tonne gebaut - die kann ja aus dem Archiv holen und in ein Album stellen - so zur Überbrückung 
Lg, juergen
Servus Bernd, tja- etwas Geduld müsst ihr noch aufbringen
hab aktuell zuviel gleichzeitig laufen. Ich hab vor >10 Jahren schon mal eine Tonne gebaut - die kann ja aus dem Archiv holen und in ein Album stellen - so zur Überbrückung Lg, juergen
5. December 2020, 20:04
5. December 2020, 20:35
December 4, 2020
December 2, 2020
November 28, 2020
November 23, 2020
November 22, 2020
November 19, 2020
November 12, 2020
November 8, 2020
Workshop Diorama Scenic Kit Basic Set German Workshop Basic Set
Uschi van der Rosten 1:72
3001 (WDB-1)
+Uschi van der Rosten 1:72
3001 (WDB-1)
8. November 2020, 15:48
November 7, 2020
1:72
Ideas
Scratchbuilt
7. November 2020, 09:14
Juergen Klinglhuber
Hi - someone out there having a clue what kind of aircraft this is? Siemens Schuckert ? Inputs welcome !!
Hi - someone out there having a clue what kind of aircraft this is? Siemens Schuckert ? Inputs welcome !!
7. November 2020, 09:17
October 30, 2020
October 29, 2020
wnolder.php?lang=en
2020-10-29 18:02:24
2011-05-08 19:29:24
10307
todo