Wall
Wall

added a new photoalbum.
1/72 BT-7 mod. 1937
12 images
The wash was also used to represent a stain on one of the fuel tanks
Project: BT-7 mod. 1937 & BT-7A F-32
All comments (8) » 13 2 August, 18:51
August 13, 2022
August 12, 2022
August 11, 2022
August 4, 2022
August 2, 2022
August 1, 2022

Nice! Might be a prototype configuration (A7+) shown on the boxart, but a Vespid-quality Leopard 2 shouldn´t hurt anyone 🙂
3 30 July, 13:11

Yeah, exactly what I thought. Some KMW Leopard 2 PSO scheme from 2006-2008.
1 August, 00:00
July 30, 2022
July 29, 2022
July 23, 2022

added a new photoalbum.
UAZ 469 - "Field Trip"
6 images
The stand was primed in deck tan, although the final apperance will be modified with acrylic colours, using this layer a...
Project: UAZ-469
All comments (10) » 13 10 July, 17:33
July 22, 2022
July 21, 2022
July 7, 2022

added a new photoalbum.
BTR-80A Hungarian ISAF
37 images
The build is finished and I have a little base to go with it (Y)
Project: BTR-80A Hungarian ISAF
All comments (19) » 43 11 June, 11:43
July 5, 2022
June 24, 2022
June 23, 2022
June 15, 2022
June 11, 2022
June 4, 2022

added a new photoalbum.
VCC-80 Dardo IFV (1/72)
4 images
I dryfitted the turret, lower hull and upper hull. Next step will be to carefully clean all the parts and remove remains...
Project: VCC-80 Dardo IFV
4 1 June, 15:47

Nice project!, fore sure, i follow your progress 😁
I got the BMR-1 from Red Tank Miniature.
Wanted to see how these kits would look like.
Actually quite good quality, only the underside becomes difficult to clean.
And even with these, the individual layers can be seen somewhat.
1 June, 15:58

The individiual layers being visible is - and will likely for the near future be - a thing with 3D printed kits. A major issue I ran into with this particular kit is the fit of the side fenders between the tracks , the lower and the upper hull... it is very thight and I have not yet managed to get everything lined up properly. I will have to put in a bigger session sometime to get everything to fit
4 June, 15:22
June 1, 2022
May 31, 2022

added a new photoalbum.
SPARK Mine Roller in 1/72
1 images
The result from printing the .stl with my Photon Mono. It took about 2 1/2 hours. Of course, some layers are visible, as...
Project: M1240 M-ATV w/ SPARK Mineroller
3 30 May, 18:52

Unfortunately, they are. But luckily 3D printing is helping out there a little 👍
31 May, 07:02
May 30, 2022

added a new photoalbum.
Panzerkampfwagen VIII "Maus II"
20 images
Finished! And presented on a fitting book I had in stash :)
Project: Panzerkampfwagen VIII "Maus II"
All comments (11) » 18 1 May, 18:47

Great result!
A well-executed pattern and your chipping and weathering fits perfectly to this scheme.
The camouflage tarpaulins give the whole individuality and bring in a little more variety.
Really like your work 👌
30 May, 18:58

Thanks for the feedback! Considering the tarpaulins were a method to cover up a misshap with the varnish in the first place, I was indeed rather happy how they turned out 🙂 Most importantly, I had an easier time sculpting using Tamiya putty than using Milliput which made the process rather enjoyable 👍
30 May, 19:15
May 25, 2022
May 23, 2022

owns this item

3 sets in 1
Modern U.S. M153 CROWS II System M1 turret and HMMWV not included T-Model 1:72
A72002 2018 New tool 23 May, 20:52

owns this item

M1240 M-ATV w/ M153 CROWS II Mine Resistant Ambush Protected All Terrain Vehicle
Galaxy Hobby 1:72
GH72A02 2018 New parts 23 May, 20:52
May 22, 2022

added a new photoalbum.
GAZ MM w/ 25mm 72-K
19 images
Truck vs USB... nicely shows the dimensions of this model
Project: 25mm 72K Light AA Gun on GAZ-MM
All comments (8) » 23 14 April, 08:55
May 21, 2022
May 20, 2022
May 18, 2022
May 17, 2022

wants this item

M1227 M-ATV CROWS w/M153 Remote Weapon Station w/XZL 16.00 X R20 Wheel set
Galaxy Hobby 1:72
GH72A06 2022 New parts 17 May, 09:18
May 15, 2022
May 6, 2022
May 3, 2022
April 30, 2022
April 29, 2022
April 27, 2022
April 25, 2022
April 12, 2022

owns this item

170mm A/T Gun Barrel for German Jagdpanzer E-100 for Trumpeter
Aber 1:72
72L67 (72L-67) 2018 New tool 12 April, 18:55
April 9, 2022
April 7, 2022

added a new photoalbum.
AA-70 Airfield Rescue and Firefigthing Truck
3 images
A good portion of the superstructure is finished and dry-fitted onto the chassis. I already used styrene sheet to built ...
Project: AA-70 Airfield Firefighting Vehicle
All comments (13) » 17 17 February, 10:19
April 3, 2022

added a new photoalbum.
Humber Armoured Car Mk.II (Attack 1:72)
20 images
Finished it! Here are some final pics:
Project: Humber Mk.II Armoured Car
All comments (9) » 14 20 March, 20:20
April 1, 2022
March 31, 2022
March 30, 2022
March 29, 2022
March 27, 2022

wants this item

170mm A/T Gun Barrel for German Jagdpanzer E-100 for Trumpeter
Aber 1:72
72L67 (72L-67) 2018 New tool 27 March, 12:00
March 20, 2022
March 17, 2022
March 9, 2022

added a new photoalbum.
M46 Patton (Trumpeter 1:72)
9 images
Decals were applied over a gloss varnish (Mr Hobby), but did no really adhere properly, leaving airbubbles. As I had no ...
Project: M46 Patton
All comments (10) » 15 2 March, 20:49

Regarding the decals: I always use them on a semi-matt surface.
I think that gives better adhesion to the surface than gloss varnish.
Vallejos decal fix also works very well and is really easy to work with.
But so far very good work! A pleasure to watch you do it!
9 March, 08:58
March 4, 2022
February 28, 2022

owns this item

USA M983A2 HEMTT Tractor and Soviet MAZ 7410 Tractor Combo 2-in-1 Limited Edition
Modelcollect 1:72
MA72009 2016 Model set Multi-topic (2)28 February, 20:12
February 25, 2022

wants this item

USA M983A2 HEMTT Tractor and Soviet MAZ 7410 Tractor Combo 2-in-1 Limited Edition
Modelcollect 1:72
MA72009 2016 Model set Multi-topic (2)25 February, 18:59
February 24, 2022
February 22, 2022
wnolder.php?lang=en
2022-02-22 18:49:25
2017-08-09 18:00:26
33587
/ajax/wnolder.php?lang=en&sd=2022-02-22 18:49:25&md=2017-08-09 18:00:26&filter=&w=33587
todo