scale modeling database | stash manager
hasard
Norbert Steffens (hasard)
DE

Torpedoboot A 86

Comments

18 June 2017, 16:32
Norbert Steffens
A quick and dirty project in between my bigger and more complex project. Ready for coloring
18 June 2017, 16:43
Martin Oostrom
Lovely!
18 June 2017, 18:19
KlausH
Very nice Norbert, very clean work! 👍
18 June 2017, 18:31
Mike Kryza
👍
18 June 2017, 18:37
Norbert Steffens
You're right the north star PE Parts are extremly tiny and super thin. But the size of the whole model is that small that I'd need only 3 weekend to finish it. Now I have to start painting. The water surface is challenging, because I'm experimenting with different techniques on water surfaces. Last time(with my Varyag) I'tried Silicon with big sucsess. This time I'used acrylic plaster on Styropor.
22 June 2017, 05:05
Holger Kranich
Is this a kit from north star models or are only the pe? It looks absolute beautiful to me! I can say, i fell in love with the first sight!
22 June 2017, 06:51
Holger Kranich
Kann es sein das dass Grundmodell von Mirage Hobby ist?
22 June 2017, 06:58
Markus Kutsch The Plastic Bench
Thats right,Lode.
In my opinion one of the difficult things to do(realistic water surface )
22 June 2017, 15:36
Norbert Steffens
Ok, yes it's a mirage hobby kit with PE Parts von North Star. Without the PE Parts it's much to simple and not really detailed.
22 June 2017, 19:06
Norbert Steffens
Lode.Watersurfaces are not that tricky. On my Varyag dio I used styropor as basement, paint it arund the hull in light cyan. the rest in dark blue and shades of blue up to black. Then apply normal silicone and modelling it with a spoon and for the top of the waves with a stick. Let it dry and drywash th waves.Fill The gap between the hull and the water also with silikon. The good thing I put in the dhip after I'm satisfied with the water. So there is no dange to ruin your ship. In filling the gap you can't do much wrong.
This time I used acrylic plaster, and I'm a little bit nervous about the result....But the worst thing wich can happen is that I have to build up a new basement, because I put in the hull not before everything is to my full satisfaction. Be brave!
22 June 2017, 19:26
Martin Oostrom
These video's make it look sooooo simple:
Youtube Video
Youtube Video
Youtube Video
I'm pretty sure it isn't that simple 😎
 
22 June 2017, 19:38
Norbert Steffens
Not Bad Martin. I think this is a good method for small scales like 1:700. I'm not shure if you can creat bigger waves or a rough sea.But in the end this is also acrylic gel. Thanks
22 June 2017, 20:10
Amir Mohammad Alizadeh
You call it "quick and dirty"?! Seriously?! I am fascinated with the water and waves. What materials do you use for water?
23 June 2017, 15:51
Norbert Steffens
AMir: I'did use Acrylic gel from artist store. It's not clear! So I'm not shure if i can create a "depth" effect.
24 June 2017, 12:10
Norbert Steffens
Lode: Some additional remarks. At an early stage of the build i wrap the hull(without PE Parts applied) in a clear plastic wrap. The it is really easy to create the water surface. Let it dry and after remove the hull. The wrap sticks to the acrylic gel or the silicone, but you can remove it quite easily.
24 June 2017, 12:13
Norbert Steffens
OK. I don't have had the time to upload my littel project after finishing, and then forogt it....... Now some pics of the finished model. My first time to show a ship in heavy sea. Never did sea spray before.
9 July 2018, 11:08
Norbert Steffens
I finished this model end of last year. Maybe you find the mistake i made. I have been concentrating on the sea scape and the spray that much so I forget someting....maybe you find it. Cheers
9 July 2018, 11:09
Martin Oostrom
A couple of guesses. There's little to none bowwave.
Also, the flag at the formast shows a wind from the portside. The flags at the aft mast indicate wind from the rear.

She does look gorgeous!
9 July 2018, 12:04
Dave Flitton
Beautiful
9 July 2018, 12:06
Dave Flitton
I guess this is what you would call a "wet" ship (or Boat).
9 July 2018, 12:07
Norbert Steffens
Thanks Dave. QMartin: No and No. I'll tell you. On the real ship there was a big white 86 on the bow...I forgot this completley. And now with all the spray an water on the hull it's impossible to attach it. 🙁(
9 July 2018, 12:31
Martin Oostrom
And I was feeling smart 🙁
But I second Lode's opinion 👍
9 July 2018, 20:57
Clifford Keesler
Beautiful ship.
9 July 2018, 21:48
R VG
I always wondered how the ship guys created these water effects?
Well thanks for filling me in this topic!! I'm sure your explanation makes it seem easier than it really is.
10 July 2018, 00:12
Jacek
Looking at a model of ship like that, makes me want to build one myself - congratulations!
3 August 2018, 08:08
Peter Hardy
Nice little project Norbert! Love the base too. Excellent work with the pe too. I've never been to sea but I reckon it would look pretty much as you depicted. Congratulations, brought a smile to my face when I found it.
3 August 2018, 10:19
Tim Heimer
Love the dio! , Nice work on the ship too!
3 August 2018, 12:01
Norbert Steffens
thank's a lot. I really appreciate your comments. It motivate me to go on with other project.
3 August 2018, 13:55
Kars Jans
👍
3 August 2018, 14:39

Project info

10 images
1:350
Completed
1:350 A86 - Torpedoboot (Mirage Hobby 350505)1:350 Detail Set for German A86 Torpedoboot (North Star Models NSA350116)

All albums

View all albums »