Maxxpro MRAP

The engine in this kit is missing some important details - the intake manifold and the rewr of the turbo. I managed to take from another kit parts needed to better show how the real engine looks. 

Started adding wiring and brake lines.
On another note, why doesn't this model have a transmission?!?! 

Started adding wiring and brake lines.
On another note, why doesn't this model have a transmission?!?! 

Started adding wiring and brake lines.
On another note, why doesn't this model have a transmission?!?! 

Started adding wiring and brake lines.
On another note, why doesn't this model have a transmission?!?! 

Started adding wiring and brake lines.
On another note, why doesn't this model have a transmission?!?! 

More hydraulic, air and brake lines added. Ive managed to find a technical manual which shows a good amount of what goes where. So making the best with what is included on. 

More hydraulic, air and brake lines added. Ive managed to find a technical manual which shows a good amount of what goes where. So making the best with what is included on. 

More hydraulic, air and brake lines added. Ive managed to find a technical manual which shows a good amount of what goes where. So making the best with what is included on. 

More hydraulic, air and brake lines added. Ive managed to find a technical manual which shows a good amount of what goes where. So making the best with what is included on. 

chassis finally ready for a coat of primer 

chassis finally ready for a coat of primer 

chassis finally ready for a coat of primer 

chassis finally ready for a coat of primer 

chassis finally ready for a coat of primer 

chassis finally ready for a coat of primer 

chassis finally ready for a coat of primer 

Slowly getting there 

intercom wiring and interior wiring added 

interior is slowly coming along. Still have a few things to add. I've tried using anti slip paste on the floor, hopefully once painted the texture will show through. 

interior is slowly coming along. Still have a few things to add. I've tried using anti slip paste on the floor, hopefully once painted the texture will show through. 

interior is slowly coming along. Still have a few things to add. I've tried using anti slip paste on the floor, hopefully once painted the texture will show through. 

Few more little details added. Box on radio rack, folding table on LLS and a scratch built extinguisher that feeds the interior fire system.  

Few more little details added. Box on radio rack, folding table on LLS and a scratch built extinguisher that feeds the interior fire system.  

Few more little details added. Box on radio rack, folding table on LLS and a scratch built extinguisher that feeds the interior fire system.  

Completed the outside of the roof, just need to do the underside before priming. 

Started painting the interior. 

Started painting the interior. 

Hard to see, but im happy with the anti-slip on the floor 

A little bit more added to the interior today. The kit doesn't include pedals, so I scratched some up. 

A little bit more added to the interior today.  

Almost finished the windscreen area. Duke control box added from the ms productions kit, and FCBC2 screen from the blast models MRAP radio set. 

My eyes are screaming. 

Began the radio install. I have 2 wires installed on the side panel that will be the master intercom to intercom wiring. The 2 wires hanging down the back are the power cables and they will be routed round to the front cable conduit. 

Began the radio install. I have 2 wires installed on the side panel that will be the master intercom to intercom wiring. The 2 wires hanging down the back are the power cables and they will be routed round to the front cable conduit. 

All that lovely, positioned correctly wiring. It would be a shame to... 

...cover it up! 

The rear compartment wiring is complete. The duke box isn't in the correct position as this doesn't put the seats in the correct position for having a duke system on board (even tho it has a duke antenna included). 

The rear compartment wiring is complete. The duke box isn't in the correct position as this doesn't put the seats in the correct position for having a duke system on board (even tho it has a duke antenna included). 

The rear compartment wiring is complete. The duke box isn't in the correct position as this doesn't put the seats in the correct position for having a duke system on board (even tho it has a duke antenna included). 

The rear compartment wiring is complete. The duke box isn't in the correct position as this doesn't put the seats in the correct position for having a duke system on board (even tho it has a duke antenna included). 

The rear compartment wiring is complete. The duke box isn't in the correct position as this doesn't put the seats in the correct position for having a duke system on board (even tho it has a duke antenna included). 

Interior is almost finished. Waiting for the BFT CPU to arrive had slowed me down. Just a couple more wires to route and a couple things to add, then ill beable to glue the windscreen in and route the wiring from that aswell. 

Interior is almost finished. Waiting for the BFT CPU to arrive had slowed me down. Just a couple more wires to route and a couple things to add, then ill beable to glue the windscreen in and route the wiring from that aswell. 

Interior is almost finished. Waiting for the BFT CPU to arrive had slowed me down. Just a couple more wires to route and a couple things to add, then ill beable to glue the windscreen in and route the wiring from that aswell. 

*think* ive finished the interior. The wiring at the back is for the rear door hydraulics and antenna wiring going to the roof. 

*think* ive finished the interior. The wiring at the back is for the rear door hydraulics and antenna wiring going to the roof. 

*think* ive finished the interior. The wiring at the back is for the rear door hydraulics and antenna wiring going to the roof. 

*think* ive finished the interior. The wiring at the back is for the rear door hydraulics and antenna wiring going to the roof.