F-4 Phantom II 60th Anny Aeroscale GB

1
October 31, 2020
The kit pretty much as I received it.
2
October 31, 2020
Some of the extra goodies. The Eduard FOD & bang seat belts I am just using as examples to fashion my own.
3
November 16, 2020
Not a lot of progress on my own Phantom build but between some hi-res color photocopies of some PE cockpit & placard sets, the lackluster console decals & some scratchbuilding I should have a decent 3-foot cockpit, if I put the canopies down!! 😉
4
November 16, 2020
Had to modify the front office a little bit to fit the AeroClub seat. While it is rare that a Phantom kit needs nose weight, I shouldn’t have to worry about that! Also need to fill in the slots for the kit seats.
5
November 22, 2020
Didn't think it would take me four plus hours but finally got the seats fitted.
6
November 23, 2020
Glad my efforts with the Aeroclub seats were NOT in vain! Looks like I would have had to do the same thing with the Hasegawa bang chairs I found out after getting them (mostly) together!! One of the face curtain loops had broken off one of the seat tops, fortunately it was still in the bag. The Hasegawa seats might need some cleaning up but they certainly will not look bad.

Comments

4 31 October 2020, 18:49

Clifford Keesler
I see a beauty comming.

17 November 2020, 03:26

Calvin Gifford
👍

17 November 2020, 06:08

Maciej Bellos
Following!

22 November 2020, 06:44

Calvin Gifford
👍

22 November 2020, 06:53

Clifford Keesler
Nice progress.

23 November 2020, 02:21

Clifford Keesler
I use the eduard F-4 pe sets for the Hasegawa F-4's on all my Phanthom models. Hasegawa, Esci, Monogram, Revell etc. I have not found one yet that it did not work on.

23 November 2020, 02:25

Calvin Gifford
Thanks for that bit of info! What I've done so far is replace the rear IP with one from (I *think*) a Hasegawa kit and the front IP with one from an Academy F-4D. I will be replacing the rear consoles with some leftover Academy D ones and what I was planning on doing for the front consoles was photocopying the Eduard PE ones and just printing them out and gluing them on! LOL Cheating, I know, but I want to save the actually PE sets for my Hasegawa builds. ;-D

23 November 2020, 02:35

Calvin Gifford
BTW, I found out from a friend of mine that has done literally hundreds of Phantom builds that I don't need to worry about putting weight in the nose of ANY F-4. So I will be saving the metal Aeroclub seats and installing some leftover Hasegawa bang chairs.

23 November 2020, 02:38

Clifford Keesler
I have never had one be a tail sitter. Cool idea on copying the pe, never thought of that. It would save me a lot. I just bought an aeroclub MK 9 bang seat for mt jaguar, first one I have ever bought, and was the only MK9 I could find.

23 November 2020, 03:13

Calvin Gifford
Not cheap but if you get two from them and maybe some other seats you can spread the S&H out:

Ebay.com Item - NeoMega 1 48 Resin Ejection Seat Martin Baker Mk 9

23 November 2020, 03:34

Clifford Keesler
Thanks Calvin. I forgot all about NeoMega. I have ordered stuff from them before, cockpits for my Mirage F-1''s J-37 Viggen and SU-27.

24 November 2020, 02:25

Calvin Gifford
👍

24 November 2020, 07:04

Album info

Attempting to turn an older ho-hum boxing into a respectable shelf kit.

1/48 ESCI F-4E Phantom II 60th Anny Aeroscale GB

6 images

1:48

On hold

1:48 F-4E, RF-4C Phantom II (Hi-Decal Line 48-027)

1:48 F-4E Phantom II (ESCI/Scale Craft 4041)

1:48 F-4 Phantom II Placards (Eduard FE243)

McDonnell Douglas F-4E Phantom II

نیروی هوایی شاهنشاهی ایران (Imperial Iranian Air Force 1925-1979)

All albums

View all albums »