Academy F-15C
Comments
17 April 2017, 16:08
Daniel SmithThanks Erik. The kit is simple, with very little problems. I'll post a run down of the problems I ran into. 🙂
24 April 2017, 14:00
Daniel SmithOne of two problems I ran into was, part E1 and B16. When B16 is placed as shown, the center cone did not line up flush with E1. So I glued the cones together first, then glued sides that go over the air intakes. Second was the nose did not line up flush with the main air frame, so I started with 400 grit sand paper and grinded it down flush, then polished the scratches away with fine sandpaper, starting at 800 and finishing with 2000.
26 April 2017, 15:55
