Zeď

Wall

NLAWScametovisit
přidal nové fotoalbum.

27 obrázky

Rodney build

1:700

Projekt: HMS Rodney- Bismark Breaker

1:700 British Battleship Rodney (Tamiya 77502)

1:700 Photo-Etched Parts for RN Battleship Nelson-class (Pit-Road PE723)

1:700 WWII RN Rodney Battleship Wood Deck (Wood Hunter W70010)

6 1 February, 03:20

February 2, 2025

NLAWScametovisit
přidal nové fotoalbum.

131 obrázky

UH-2A Build

1:72

Projekt: LTCMD Tom Bryan's UH-2A

1:72 UH-2 A/B Seasprite (Clear Prop! CP72002)

1:72 UH-2 A/B SEASPRITE painting mask (Clear Prop! CPA72051)

1:72 UH-2 A/B Seasprite resin exhaust (Clear Prop! CPA72021)

Všechny komentáře (12) » 40 16 July 2024, 13:41

Anatolii Smyshliaiev
If still relevant.
Pic 43-45. Before gluing the fuselage roof to the lower part, I glued 2 spacers from sprue scraps between the walls.
Pic 46 and 47.
I simply cut off the inner side of the hood wall, leaving the outer side untouched, achieving a tight fit along the outer surface. And I puttyed a little bit on the front of the hood.

24 September 2024, 08:14

NLAWScametovisit Autor
Good advice!

24 September 2024, 14:14

February 1, 2025

NLAWScametovisit
přidal nový projekt.

HMS Rodney- Bismark Breaker

27 obrázky

1:700

Dokončeno

1 1 February, 03:02

December 23, 2024

NLAWScametovisit

Whats a good way to keep custom numbers lined up? I've been just eyeballing it and i feel like the decals always end up looking a little bit tilted

23 December 2024, 20:56

Spanjaard
you could try with a piece of masking tape a bit lower than the correct location, and align the carrier firm to it (but not covering the tape to avoid problems when you lift it) . if all decals are from same set, should fave more or less same excess carrier form and align nicely . just an idea

1 23 December 2024, 21:19

November 8, 2024

NLAWScametovisit
now follows Dave Burgess

8 November 2024, 15:11

August 22, 2024

NLAWScametovisit

It seems like hawk graphics is closed down 🙁 . Anyone have any recommendations for how I can get like, a custom print of waterslide decals to replicate the sets they sold?

3 June 2024, 12:24

bughunter
The web site is still reachable and so not mention a close down, but I have not checked phon number or email. But yes, the newest decals marked with "NEW" are from 2012.
May be you can find a mate with the set in stash to do a high resolution scan for a print? The quality will not be same I guess and white is not easy to print.

3 June 2024, 12:56

NLAWScametovisit Autor
thank you!

3 June 2024, 15:07

Ben M
I had good luck with stsdecals.com - if you send them a scan of what you want, they can print them. The ones I ordered were thin and strong.

22 August 2024, 01:46

NLAWScametovisit
now follows Guy Rump

22 August 2024, 01:32

NLAWScametovisit
now follows ALBERTO ITURBURU HERREROS

22 August 2024, 01:02

August 19, 2024

NLAWScametovisit
now follows Mina Ro

19 August 2024, 23:54

NLAWScametovisit
now follows ScaleFella NAFO

19 August 2024, 15:09

August 18, 2024

NLAWScametovisit
přidal nové fotoalbum.

121 obrázky

Oliver Hazard Perry Build

1:350

Final coat of varnish after attaching the flight deck nets. She looks amazing.

Projekt: USS Ford (FFG-54)

1:350 USS Oliver Hazard Perry FFG-7 (Academy 14102)

No Tamiya Extra Thin Cement (Tamiya 87038)

No Tamiya Masking Tape 18mm x 18m (Tamiya 87032)

10+

Všechny komentáře (11) » 39 8 March 2024, 03:26

NLAWScametovisit Autor
Thank you all for the feedback and support! I really loved building this kit, and I loved all the details of the OHP class that I learned in the process. This kit really was an amazing way to get into modeling.

17 August 2024, 00:59