Zeď
Wall
December 8, 2024
December 4, 2024
December 3, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (16) » 15 24 November, 20:02
Roland Sachsenhofer
Thank you for these friendly words, Rui!
Yesterday I applied the primer - glossy black from Gunze - and also a little filler on the fine inaccuracies and gaps that were overlooked when sanding. Today I was able to sand off these repairs, which is why the model is still so dusty, which I only noticed in these pictures. I'll show you a few pictures of this state, but in the meantime the first layer of 'aluminium' from Alclad II/ Ammo MiG has already been applied.
Thank you for these friendly words, Rui!
Yesterday I applied the primer - glossy black from Gunze - and also a little filler on the fine inaccuracies and gaps that were overlooked when sanding. Today I was able to sand off these repairs, which is why the model is still so dusty, which I only noticed in these pictures. I'll show you a few pictures of this state, but in the meantime the first layer of 'aluminium' from Alclad II/ Ammo MiG has already been applied.
3 December, 06:43
December 2, 2024
December 1, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (11) » 13 29 November, 16:13
Roland Sachsenhofer
I am very happy about all your interest, mates - that motivates me! I can show you the P-8 in 'all its greatness' - it won't be any longer, wider or higher, but that should be enough 🙂 The kit goes together very nicely, but a little bit of filler is still needed.
Dieter: keine Sorge, habe noch so 7, 8 Jährchen vor mir... 🙂
I am very happy about all your interest, mates - that motivates me! I can show you the P-8 in 'all its greatness' - it won't be any longer, wider or higher, but that should be enough 🙂 The kit goes together very nicely, but a little bit of filler is still needed.
Dieter: keine Sorge, habe noch so 7, 8 Jährchen vor mir... 🙂
1 December, 12:38
November 29, 2024
November 24, 2024
November 23, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (41) » 82 13 September, 19:23
Juergen Klinglhuber
An eye-catcher perfectly done - congrats Roland. Good job as always!!
An eye-catcher perfectly done - congrats Roland. Good job as always!!
23 November, 11:18
November 21, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (38) » 36 15 September, 11:53
Stefan Fraundorfer
Congratulations on this excellent model of the Super Solution, with which Jimmy Doolittle won the first Bendix race in 1931.
Congratulations on this excellent model of the Super Solution, with which Jimmy Doolittle won the first Bendix race in 1931.
19 November, 18:40
November 16, 2024
November 15, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (54) » 72 9 August, 07:14
Clement
Impressive craftsmanship and dedication. Many of us (myself included) would have sent it to the bin instead.
Impressive craftsmanship and dedication. Many of us (myself included) would have sent it to the bin instead.
14 November, 07:37
November 14, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (32) » 27 29 October, 09:36
Roland Sachsenhofer
I have just finished Anthony Burton's 'Richard Trevithick: Giant of Steam about Trevithick's biography - what a fascinating character he must have been! Cornwall at that time must have been a rough place... Thank you, Williams, for your words!
I have just finished Anthony Burton's 'Richard Trevithick: Giant of Steam about Trevithick's biography - what a fascinating character he must have been! Cornwall at that time must have been a rough place... Thank you, Williams, for your words!
14 November, 06:28
November 13, 2024
November 9, 2024
November 8, 2024
November 2, 2024
October 29, 2024
October 28, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (94) » 104 25 August, 10:13
Roland Sachsenhofer
Your words are generous - and very welcome and appreciated, for sure 🙂 I'm so glad you like Mars and thank you very much, mates!
Your words are generous - and very welcome and appreciated, for sure 🙂 I'm so glad you like Mars and thank you very much, mates!
28 October, 16:13
October 24, 2024
October 18, 2024
October 13, 2024
October 8, 2024
October 1, 2024
September 24, 2024
September 23, 2024
September 19, 2024
Roland Sachsenhofer
added a new article to jeho personal gallery:
added a new article to jeho personal gallery:
ZiL-131 Command Vehicle and APA-50M on ZiL-131
ICM 1:72
by Roland Sachsenhofer on Kitchecker Modell-Journal
1 19 September, 14:33
September 16, 2024
September 14, 2024
September 13, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (11) » 24 1 September, 06:57
Roland Sachsenhofer
I am very happy about your positive feedback - thank you, mates! Two more T-38s, this time from Trumpeter, are still in the pipeline; well, for me the 'Talon' is one of the most beautiful jets, especially in the look of the 'White Rocket' 🙂
Skyhiker, the collection is indeed growing... 🙂 Well, the only thing I can think of regarding the 'secret' is that I like to build models in parallel with a certain consistency - rarely more than five, rarely less than three.
I am very happy about your positive feedback - thank you, mates! Two more T-38s, this time from Trumpeter, are still in the pipeline; well, for me the 'Talon' is one of the most beautiful jets, especially in the look of the 'White Rocket' 🙂
Skyhiker, the collection is indeed growing... 🙂 Well, the only thing I can think of regarding the 'secret' is that I like to build models in parallel with a certain consistency - rarely more than five, rarely less than three.
13 September, 19:23
September 11, 2024
September 9, 2024
Roland Sachsenhofer
added a new article to jeho personal gallery:
added a new article to jeho personal gallery:
6 7 September, 07:38
René "Lord Bilbo" Bartholemy
Sehr gute Zusammenfassung, Roland. Gibt mir Lust um mein Kit endlich zu Ende zu bauen.
Ich habe allerdings eine Frage: das "Wellblech" "wellt sich" auch innen, oder? Das fehlt mir irgendwie im Cockpit des Bausatzes...
Ich hatte da ein paar Sachen probiert, aber ohne Erfolg.
René
Sehr gute Zusammenfassung, Roland. Gibt mir Lust um mein Kit endlich zu Ende zu bauen.
Ich habe allerdings eine Frage: das "Wellblech" "wellt sich" auch innen, oder? Das fehlt mir irgendwie im Cockpit des Bausatzes...
Ich hatte da ein paar Sachen probiert, aber ohne Erfolg.
René
7 September, 13:16
Roland Sachsenhofer
Potzblitz! Erwischt! 🙂 Thank you, Rene, I've obviously missed something important - I think you're absolutely right about the corrugated metal interior structure! Now that you've indicated that you've thought about a solution, I've also considered how to improve this..... I might try using black decal strips next time to at least give a visual hint of the structure, but I'm sure there are even more sophisticated approaches.
Potzblitz! Erwischt! 🙂 Thank you, Rene, I've obviously missed something important - I think you're absolutely right about the corrugated metal interior structure! Now that you've indicated that you've thought about a solution, I've also considered how to improve this..... I might try using black decal strips next time to at least give a visual hint of the structure, but I'm sure there are even more sophisticated approaches.
8 September, 09:12
René "Lord Bilbo" Bartholemy
I tried to create corrugated metal from a fine sheet of metal using my "tentacle tool" and a toothpick. It worked quite well, but there just wasn't enough space in the cockpit itself to place it. It's kinda cramped in there...
Your idea might work much better.
I tried to create corrugated metal from a fine sheet of metal using my "tentacle tool" and a toothpick. It worked quite well, but there just wasn't enough space in the cockpit itself to place it. It's kinda cramped in there...
Your idea might work much better.
8 September, 16:33
Roland Sachsenhofer
Well, that sounds like the two of us should build another Junkers D.1! 🙂
Well, that sounds like the two of us should build another Junkers D.1! 🙂
9 September, 13:27
September 7, 2024
September 2, 2024
September 1, 2024
August 31, 2024
Roland Sachsenhofer
added a new article to jeho personal gallery:
added a new article to jeho personal gallery:
2 31 August, 08:21
Spitfire14
Thanks thomas. I prefer plastic. The epoxy material is also ok but I have my issues with PE parts.
Thanks thomas. I prefer plastic. The epoxy material is also ok but I have my issues with PE parts.
31 August, 15:15
August 28, 2024
August 25, 2024
August 24, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
12 23 August, 13:35
Roland Sachsenhofer
I am pleased to be able to present the second Junkers F.13 to you. This pleasure is fuelled by the fact that these are not tricky kits - on the other hand, the variety provided by the corrugated sheet metal was great fun and, important to say, these are not bad kits! The one thing I now realise is that with the corrugated metal-work you have to plan exactly what you are going to do and when. In any case, I can only recommend this MikroMir kit! Thank you for your interest and your valuable and motivating comments!
I am pleased to be able to present the second Junkers F.13 to you. This pleasure is fuelled by the fact that these are not tricky kits - on the other hand, the variety provided by the corrugated sheet metal was great fun and, important to say, these are not bad kits! The one thing I now realise is that with the corrugated metal-work you have to plan exactly what you are going to do and when. In any case, I can only recommend this MikroMir kit! Thank you for your interest and your valuable and motivating comments!
23 August, 13:46
Ludvík Kružík
That's really great! When I look at the pictures, I feel like I'm looking at a real plane.
Very well built model and perfect pictures!
That's really great! When I look at the pictures, I feel like I'm looking at a real plane.
Very well built model and perfect pictures!
23 August, 21:46
Roland Sachsenhofer
Gorby and Ludvik, your words are high praise for me - thank you!
Gorby and Ludvik, your words are high praise for me - thank you!
24 August, 05:58
August 23, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (10) » 30 21 August, 15:57
Ludvík Kružík
A very interesting machine that is not often seen on these pages.
Nicely built and photographed. 👍 👍 👍
A very interesting machine that is not often seen on these pages.
Nicely built and photographed. 👍 👍 👍
23 August, 08:53
Roland Sachsenhofer
Thank you very much for your comment, Ludvik.
It gives me great pleasure to be able to present the second F.13, which has just been completed, in a second gallery post! 🙂
Thank you very much for your comment, Ludvik.
It gives me great pleasure to be able to present the second F.13, which has just been completed, in a second gallery post! 🙂
23 August, 13:47
August 22, 2024
August 20, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (15) » 21 5 August, 12:53
Roland Sachsenhofer
A few new pictures of the Junkers double: everything shines like crazy because the application of the decals was prepared with layers of glossy clear varnish. Of course, I'm really looking forward to seeing how the decals work!
The typical Junkers tiger stripes on the surfaces were created using various Alclad metal colours, but 'Dural' remains the dominant colour!
A few new pictures of the Junkers double: everything shines like crazy because the application of the decals was prepared with layers of glossy clear varnish. Of course, I'm really looking forward to seeing how the decals work!
The typical Junkers tiger stripes on the surfaces were created using various Alclad metal colours, but 'Dural' remains the dominant colour!
16 August, 16:41
Roland Sachsenhofer
Completion is not far off. Well, at least I tried! In my opinion, the 'tiger stripes' on the wings worked quite well. Without this, the (really surprisingly large) wings would have looked empty. Now it's time to clean everything up and remove dust and crumbs from several corrugated sheet metal sinks....
Completion is not far off. Well, at least I tried! In my opinion, the 'tiger stripes' on the wings worked quite well. Without this, the (really surprisingly large) wings would have looked empty. Now it's time to clean everything up and remove dust and crumbs from several corrugated sheet metal sinks....
20 August, 17:08
August 16, 2024
August 15, 2024
August 9, 2024
Roland Sachsenhofer
přidal nový projekt.
přidal nový projekt.
1 25 October 2023, 08:44
Roland Sachsenhofer
The construction of the two Junkers machines is progressing! The nice thing is that the sanding of the glued seams on the fuselage and surfaces will be very limited, at least where corrugated sheet metal edge meets corrugated sheet metal edge. But their " grooves" have to be well continued - also quite entertaining!
Here you can see the whole unvarnished truth of a freshly glued raw state: nothing has been cleaned up yet, just the worst areas have been filled or filled with plastic card.
The construction of the two Junkers machines is progressing! The nice thing is that the sanding of the glued seams on the fuselage and surfaces will be very limited, at least where corrugated sheet metal edge meets corrugated sheet metal edge. But their " grooves" have to be well continued - also quite entertaining!
Here you can see the whole unvarnished truth of a freshly glued raw state: nothing has been cleaned up yet, just the worst areas have been filled or filled with plastic card.
9 August, 07:23
August 8, 2024
August 5, 2024
August 3, 2024
August 2, 2024
July 31, 2024
July 29, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
7 29 July, 17:26
Roland Sachsenhofer
The 'Field Workshop' from Minicraft has been running for a while now, and now I've decided to finish it: I can use parts of it quite well when equipping the Junkers D.1 picture-documentation!
I would have liked a little more detail in one or two places - for example on the fittings of the pressurised bottles - Minicraft has a very good reputation here, but otherwise I'm very pleased with the subject matter and the kit design. The pictures show my attempt to breathe a little life into this beautiful and well-made kit parts. You should be able to find excerpts of them in pictures of completed models - so there will be a chance to see them again! 🙂
The 'Field Workshop' from Minicraft has been running for a while now, and now I've decided to finish it: I can use parts of it quite well when equipping the Junkers D.1 picture-documentation!
I would have liked a little more detail in one or two places - for example on the fittings of the pressurised bottles - Minicraft has a very good reputation here, but otherwise I'm very pleased with the subject matter and the kit design. The pictures show my attempt to breathe a little life into this beautiful and well-made kit parts. You should be able to find excerpts of them in pictures of completed models - so there will be a chance to see them again! 🙂
29 July, 17:33
July 27, 2024
July 25, 2024
July 24, 2024
July 18, 2024
July 17, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
10 obrázky
Saab SK 60B /60038, 3rd Squadron "Urban Gul", F21 wing in Lulea/ 19761:48
Projekt: Saab SK60 A/B - RM9
All comments (14) » 47 16 January, 20:30
Roland Sachsenhofer
That's motivating feedback, which I really appreciate! Thank you for it!
That's motivating feedback, which I really appreciate! Thank you for it!
17 July, 07:25
July 10, 2024
July 9, 2024
Roland Sachsenhofer
added a new article to jeho personal gallery:
added a new article to jeho personal gallery:
McDonnell Douglas F/A-18B Hornet NASA
Hasegawa 1:48
by Roland Sachsenhofer on Kitchecker Modell-Journal
2 9 July, 12:43
July 7, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
12 7 July, 16:18
Roland Sachsenhofer
The two ZiL 131s with different truck mounts are now ready! Here you can see one with the APA-50M superstructure. The striking yellow colour corresponds to civilian use in the former Soviet Union. I chose it because of the civilian or Aeroflot aircraft for which this airfield truck is to act as an extra during their photo shoots - it also adds some colour to life.
The two ZiL 131s with different truck mounts are now ready! Here you can see one with the APA-50M superstructure. The striking yellow colour corresponds to civilian use in the former Soviet Union. I chose it because of the civilian or Aeroflot aircraft for which this airfield truck is to act as an extra during their photo shoots - it also adds some colour to life.
7 July, 16:23
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
11 7 July, 16:26
Roland Sachsenhofer
This is the second ZiL 131 from the ICM kit. As already described in the building report, these are simply beautiful kits that offer a desirable degree of complexity on the one hand, but can also be realised quickly on the other. This ZiL here shows a version as a "command vehicle" and is therefore also suitable as an extra for photographs of completed aircraft.
I hope you enjoy the pictures as much as I enjoyed building the two trucks! 🙂
This is the second ZiL 131 from the ICM kit. As already described in the building report, these are simply beautiful kits that offer a desirable degree of complexity on the one hand, but can also be realised quickly on the other. This ZiL here shows a version as a "command vehicle" and is therefore also suitable as an extra for photographs of completed aircraft.
I hope you enjoy the pictures as much as I enjoyed building the two trucks! 🙂
7 July, 16:34
Michael Kohl
Schön. Vielleicht die Räder noch ein bisschen plan schleifen damit er satter auf dem Boden steht.
Schön. Vielleicht die Räder noch ein bisschen plan schleifen damit er satter auf dem Boden steht.
7 July, 16:42
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (46) » 72 31 May, 08:58
Hans-Jürgen Haag
Die B-17 ist super geworden! Ich mag die frühen Modelle mit ihren klaren fliesenden Konturen. Keine Türme nur Tropfenformen. 👍👍👍mal wieder ein kleines Kunstwerk!
Die B-17 ist super geworden! Ich mag die frühen Modelle mit ihren klaren fliesenden Konturen. Keine Türme nur Tropfenformen. 👍👍👍mal wieder ein kleines Kunstwerk!
7 July, 09:07
Roland Sachsenhofer
Danke für die motiverende Rückmeldung! Du hast die Faszination, die von diesen klassischen Formen ausgeht, sehr gut beschrieben- sehe ich genau so!
Thank you for the motivating feedback! You have described the fascination of these classic shapes very well - I agree!
Danke für die motiverende Rückmeldung! Du hast die Faszination, die von diesen klassischen Formen ausgeht, sehr gut beschrieben- sehe ich genau so!
Thank you for the motivating feedback! You have described the fascination of these classic shapes very well - I agree!
7 July, 12:22
June 30, 2024
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
All comments (7) » 11 23 June, 15:21
Roland Sachsenhofer
A few new pictures provide information about the current state of affairs: the surface colours have been applied and the decals have been applied - as can be seen from the shiny surfaces. Now it's time for some, well, subtle ageing and traces of use - and the tyres are masked off to be sprayed.
A few new pictures provide information about the current state of affairs: the surface colours have been applied and the decals have been applied - as can be seen from the shiny surfaces. Now it's time for some, well, subtle ageing and traces of use - and the tyres are masked off to be sprayed.
30 June, 16:03
wnolder.php?lang=cs
2024-06-30 16:03:41
2011-05-01 05:52:34
10148
/ajax/wnolder.php?lang=cs&sd=2024-06-30 16:03:41&md=2011-05-01 05:52:34&filter=&w=10148
todo