Spitfire Mk IIa

1
June 1, 2018
Beginning with the modification to the kit wings to accept the Barracuda wing correction set.
2
June 1, 2018
One the difference in the radiator intake ramp from the kit part.
3
June 1, 2018
Installation of radiators and corrected oil cooler.
4
June 1, 2018
5
June 1, 2018
Test fitting the cockpit. Not Tamiya good but surprisingly good.
6
June 1, 2018
7
June 1, 2018
Barracuda corrected seat and armor installed.
8
June 1, 2018
9
June 1, 2018
Used the kit decal for IP. Used bondic for lenses. This is going to be a closed cockpit so detail level doesn’t need to be as high.
10
June 1, 2018
11
June 1, 2018
12
June 1, 2018
13
June 1, 2018
HGW fabric belt installed.
14
June 1, 2018
15
June 1, 2018
16
June 1, 2018
Comparison to the Tamiya IX.
17
June 1, 2018
18
June 1, 2018
Sanded down the step created by the back window.
19
June 1, 2018
20
June 1, 2018
21
June 1, 2018
Note green tinted windscreen.
22
June 1, 2018
Checking seams. Reapplying rivets and panel lines.
23
June 1, 2018
24
June 1, 2018
Beginning black base priming.
25
June 1, 2018
Starting the marbling of the sky type S over the black base.
26
June 1, 2018
Painted the rounders using Montex masks.
27
June 1, 2018
K painted with masks.
28
June 1, 2018
Moody under shot.
29
June 1, 2018
Going to do some chipping at the wing roots. Alclad and chipping fluid are down.
30
June 1, 2018
Starting the camo. I’m using the masks, painting the dark green, then coming back over that with blue tax and the dark earth.
31
June 2, 2018
32
June 2, 2018
33
June 2, 2018
34
June 2, 2018
Working my way inboard with paint. I’m using pre cut masks as template so I get the proportions right then backfilling.
35
June 3, 2018
More dark earth.
36
June 3, 2018
Chipping.
37
June 3, 2018
Different light. Different angle. Chipping fluid works reasonably well. The pilots side, per reference photos, will be significantly heavier.
38
June 4, 2018
39
June 4, 2018
I labored over whether the walk line goes over or under the roundel. The consensus seems to be that the line does not encroach on the roundel.
40
June 4, 2018
41
June 4, 2018
left is eagleparts correct spinner and blade for this AC; middle are Revell fantasy parts; right are prop/spinner for a Mk V or sea fire.
42
June 22, 2018
43
June 22, 2018
44
June 22, 2018
45
June 22, 2018
46
June 22, 2018
47
June 22, 2018
48
June 22, 2018
49
June 22, 2018
50
June 22, 2018
51
June 22, 2018
52
June 22, 2018
53
June 22, 2018
54
June 22, 2018
55
June 22, 2018
56
June 22, 2018
57
June 22, 2018
58
June 22, 2018
59
June 24, 2018
60
June 24, 2018
61
June 24, 2018
62
June 24, 2018
63
June 24, 2018
64
June 24, 2018
Finished! Ready for glamour shots.
65
June 28, 2018
66
June 28, 2018
67
June 28, 2018
68
June 28, 2018
69
June 28, 2018
70
June 28, 2018
71
June 28, 2018
72
June 28, 2018

Comments

2 1 June 2018, 00:56

Gordon Sørensen
Great job so far, Derek. How is the Barracuda Correction set?

1 June 2018, 03:36

Spanjaard
looking quite nice. good job on those masks

1 June 2018, 09:29

Moritz Fentzahn
Looks Good Derek; especially the clean Build and the Paintjob on the underside. have the Same Kit in my stash and I am happy to see the barracuda Set here. Need to get one too

1 June 2018, 14:42

Stefan Fraundorfer
I agree with Moritz. The underside is really nice.

1 June 2018, 15:15

Derek Jordan
Gordon the Barracuda set is very very nice. A little careful surgery and it goes in without a problem. I recommend their seat and armor correction too.

1 June 2018, 20:24

Derek Jordan
Moritz it's actually a really solid kit, probably more fun than the Tamiya (with a bit more work). Sadly out of the box it's closer to a mk V than a II. The Barracuda correction set is a must as well as finding a prop/spinner correction. All said and done I've spent almost 3/4 of the cost of the Tamiya kit to get this kit corrected.

1 June 2018, 20:32

Karl Smith
Very nice indeed...

28 June 2018, 14:17

Gareth Windsor
Another fabulous build Derek. I've just ordered the Iron Maiden "Aces High" kit, it's basically this kit with a decal change and Eddy in the cockpit. I shale look for the after market parts on your recommendation.

31 October 2019, 14:58

Project info

Spitfire Mk IIa

72 images

1:32

Completed

1:32 Spitfire Mk. I/II Wing Correction Set (Barracuda Studios BR32175)

1:32 Supermarine Spitfire Mk.IIa (Revell 03986)

1:32 Spitfire Mk I-V Resin Seat with Backpad (Barracuda Studios BR32172)

All albums

View all albums »