Aoshima Honda Streem 1/42 OOB

1
August 8, 2022
Kit box ... nice isn't it ?
2
August 8, 2022
Colored sprues
3
August 8, 2022
The project started as way to spend spare hours during our Easter Holidays. Since last year we use to do that ... Usually as a back-up for bad weather ,,, which was not the case the day the picture was taken. In the backgound my missus crochet squeme.
4
August 8, 2022
Back at home ... parts alreday brush painted and ready for assembly.
5
August 8, 2022
Second coat of gloss red
6
August 8, 2022
Front suspension assembled ... then I started to get the feeling that the project was going to be difficult
7
August 8, 2022
That's what I ment ,,,,
8
August 8, 2022
Ugly gap to be filled ... to make things worst the clamp left a hideous mark in the gloss black paint that had to be removed.
9
August 8, 2022
Second attempt ot glue the parts ,,, this time I was more careful with the gloss paint.
10
August 8, 2022
As Tamiya cement was not strong enough to bond these two parts .... so I resorted to Cyano glue hoping that it would glue the parts and fill the gap at the same time.
11
August 8, 2022
More clamping .....
12
August 8, 2022
Glued and filed , but still a noticeable gap
13
August 8, 2022
on both sides
14
August 8, 2022
3rd attempt to glue the parts
15
August 8, 2022
Using gloss paint to try to fill the gap
16
August 8, 2022
17
August 8, 2022
18
August 8, 2022
Now the engine ... and more problems
19
August 8, 2022
20
August 8, 2022
21
August 8, 2022
22
August 8, 2022
23
August 8, 2022
24
August 8, 2022
The engine + transmission has proved to be very difficult to glue and set in place. There are no postive locations and the barely discerned spring , makes it even more difficult, as it pushes the engine block out of this place.
25
August 8, 2022
AS you can see , the spring pushes the transmission out of the base.
26
August 8, 2022
On our way home one suitcase fell over the box were the model was an it was destroyed beyond repair ... Well in fact it could be repaired ,,, but I didn't feel like , What started as an easy project became what I didn't expect ,,, so ... move on to another project ,,,, another Honda ... this time a Super Hawk from MPC
Honda Super Hawk AMC 1/16 - Retro-modelling | Album by yuri (1:16)

Comments

2 8 August 2022, 15:49

Jv
Julian I scrape paint of were I glue
And also any crome that Need's glued
I scrape it of were glue goes
Glue dosent stick to paint very good

26 December 2022, 04:27

Album info

An easy project .... at least I thought it should be ,,, but it turned out tougher than expected . Started during our Easter Holidays as a back-up in case of bad weather. Since a couple of yeasr ago we use to to that ... my lovely wife takes with her a crochet project and I take an easy kit to build OOB ,,, in this case not so easy ...

Honda Stream Modern Scooter OOB

26 images

1:12

Cancelled

All albums

View all albums »