Logo
scale modeling database | stash manager
ice
ice
DE

BO 105M Swooper WIP

Comments

1 14 February 2012, 22:51
Florian H.
Hi Ice, sieht echt gut aus. Allerdings ist da ein kleiner fehler. Bei dem 6. Bild hast du ja die Gitter in die Abdeckung gemacht, dort ist links (das linke Dreieck) kein Gitter im Original😉

MfG
Flo
15 February 2012, 16:13
Tim Vereecke
cool idea, nice work so far
15 February 2012, 17:01
Juan M Leria
Maybe possible a pic of the 'real' object?
15 February 2012, 17:53
Malte D
[img1] 🙂
 
15 February 2012, 18:02
Juan M Leria
Curious... It seems a former PAH-1, isn't it?
15 February 2012, 20:03
ice
@Florian: Gut zu wissen. Ich hab zwar auf einigen Bildern gesehen, dass da ein Gitter fehlt aber ich dachte immer, das sei keine Absicht.
@Juan: They use surplus PAHs as "Verbindungshubschrauber", that's right.
15 February 2012, 21:48
Holger Kranich
I love the look of the commandos! Do you build it with figures?
16 February 2012, 08:49
Malte D
Genau - falls du die Revell KSK-Figuren dazu brauchst, ich hab die über, könnte ich dir zum Flyout mitbringen. 🙂
16 February 2012, 10:43
Florian H.
@ice: Kein Problem 🙂 Falls du sie in der Winterversion bauen willst solltest du die beiden verbliebenen großen Gitter bedecken, sodass es komplett geschlossen ist. Das was weg muss bleibt trotzdem offen und die kleineren Gitter bleiben auch so wie sie sind 🙂
16 February 2012, 16:12
ice
Ich bleib der Einfachheit halber mal beim Deutsch.
@Holger: Ich denke nicht. Mit Figuren kann man viel versauen und gerade bei einer so kleinen Maschine müssen die von den Größen her zu 100% zu dem Modell passen. Ich müsste 2 wirklich gute Piloten und dann noch 4 sitzende Kommandosoldaten, die nicht alle gleich aussehen und dabei auch noch einen überzeugenden Look haben, finden. Ich werde sie eher so präsentieren: primeportal.net/hang..h_wrede/bo-105_p_sf/
@Malte: Danke aber ich werd sie nicht brauchen. 🙂
@Florian: Du hast nicht zufällig ein Foto von oben, wo man sehen kann, wie genau die Base von der Raketenoptik und die Antennen und der Schutz vom Lufteinlauf zueinander positioniert sind?
17 February 2012, 21:17
Florian H.
Hi ice, nee hab ich leider nicht und komm ich auch nicht dran, weil bei uns striktes fotografierverbot herrscht, wäre aber eh nicht mehr machbar weil wegen, add miche infach mal im icq (meine Nummer steht in meinem Profil - auch im FF ist sie drin) und dann kann man das besser eroieren😉
Ich kann dir aber auch "aufzeichnen". Schreib mich einfach mal an😉
18 February 2012, 14:30
Ivo Alba
Nice!!!!!!
10 April 2013, 00:50
Helerson Maciel
Masterful job.
Congratulations!
10 April 2013, 00:54
Burkhard D
Nice scratch work there. I've been after this little gem of a kit for a while, now I know why they go for EUR 20+ on eBay. 🙂
10 April 2013, 08:09
Luc B
tuned in
10 April 2013, 17:08
uncle chop chop
nice we all know how frustrating little models can be well done
2 May 2013, 10:42
ice
After 4 years break this project is reopened. 🙂
6 March 2016, 12:36
Ekki
Watching
6 March 2016, 18:04
Florian H.
👍
7 March 2016, 20:46
David Funke
klasse Projekt, ich schaue gern zu...
7 March 2016, 21:06
Łukasz Gliński
Nice job, watching
8 March 2016, 12:21
Harry Eder
Great job! 👍
8 March 2016, 12:57
Malte D
Schön, ein Lebenszeichen von dir zu sehen, Stefan! 👍
30 March 2016, 12:02
Pierre-Christian Baudru
Very nice start !
30 March 2016, 12:38
Holger Kranich
Yeah, Ice! Hang in there🙂
30 March 2016, 13:02
Nicolas M.
C'est beau ca ! 😄
30 March 2016, 13:36
Daniel Phelps
Hay That's Cool
14 August 2016, 17:27
ice
Thank you mates! Today the interior was painted.
18 August 2016, 20:30
John Dunbar
Cool idea!! 👍
18 August 2016, 20:44
Holger Kranich
Oh cool, you continue!
19 August 2016, 07:10
Ekki
Coming along nicely.
31 August 2016, 19:59
Ronan
Very nice start 🙂
31 August 2016, 20:33
Adam Gudynowski
Starts inresting 🙂
31 August 2016, 20:37
ice
Since the Sea King is waiting for a new shipment I can continue this little helicopter.
Two years and four month break is over. I tried to replicate the cooler on starboard side. First the old grill was removed and a new back was installed and small pieces of 01,mm wire were glued across the gap. After the glue was dried I cut the ends of the wire with a sharp knive.
Now the fuselage is closed and I'll have tu apply some putty. I ordered some AK acrylic putty. I hope this will make it easyer to close the gaps and keep the rivets.
1 January 2019, 16:08
Laurent VILLANUEVA "HELLER-forever"
good start
1 January 2019, 16:44
Łukasz Gliński
Looking forward to seeing your report on the AK putty
1 January 2019, 18:05
Stefan Schacht
looks very good so far, count me in. Cheers Stefan
1 January 2019, 20:13
Burkhard D
Pass the popcorn... 🙂
1 January 2019, 22:15
bughunter
Oh, ice is has another cool project running - watching for sure!
1 January 2019, 22:19
Ronan
Cool😉
5 January 2019, 17:39
ice
Thank you mates. This is just finishing a shelf queen that sits in its shoebox since 2010.😉

@Łukasz: It arrives tomorrow. I hope it works! 🙂

Yesterday i dipped the canopy in Future so I was able to glue it to the fuselage with Revell Contacta Clear today. I also used the chance to protect the shiny canopy with "some" Tamiya Tape. 😄
6 January 2019, 16:03
Flop_Se
Very nice scratchbuild so far! Looks very tiny! :-D
6 January 2019, 16:14
Lost_Erik
👍
6 January 2019, 23:32
ice
Thank you Lost_Erik and Flop_Se!
Flop_Se: It IS very tiny! 😄
Some more scratchbuilding over the weekend. I made the base for the sight of the PAHs and the big blade-antenna over the pilots head. I also added some detail to the base and started sanding this little fellow.
13 January 2019, 16:02
ice
First coats of colour are applied. I used the same masking technique I used on the Sea King.
2 March 2019, 23:10
Florian H.
Sieht gut aus. Baust du noch die radar warn Anlage? Auf die rotorblätter bin ich mal gespannt😢
3 March 2019, 06:23
Erik Leijdens
Looks good Ice! Always loved the "Bo"
3 March 2019, 08:12
Ronan
👍
3 March 2019, 11:21
Holger Kranich
Looks nice!
3 March 2019, 17:52
ice
@Flo: Japp - die hatte ich auf dem Zettel, hab sie aber im Eifer des Gefechts und der Vorfreude auf's Lackieren, vergessen... 😄
@Erik, Ronan and Holger: Thank you mates! 🙂
3 March 2019, 18:06
Harry Eder
Nice 👍
4 March 2019, 06:44
Melgg Lütschg
Sieht toll aus, bin sehr auf das Ergebnis gespannt!
4 March 2019, 07:46
Zsolt Czegle
Ich bin dabei! 🙂
4 March 2019, 08:34
ice
The Revell 65 bronze-green didn't look right. I loaded the airbrush with Revell 361 olive-green (with some white in it) and gave it a go. This looks better I think.
10 March 2019, 15:30

Project info

25 images
1:72
In progress
1:72 MBB BO 105C (Airfix 61068-1)

All albums

View all albums »