RC-Modellers
Kommentarer
33 5 November 2023, 15:30
![](/profiles/img/25743-467-s.jpg)
Thanks for watching. I'm not entirely sure what will happen myself, but it will be some kind of diorama with a RC-Airfield and a lake. The not sure part mostly relates to how deep the lake will be and whether I need an additional frame or can I get by with my usual picture frame.
7 November 2023, 19:42
![](/profiles/img/25743-467-s.jpg)
The planes are ready to paint, the lake is redy for the water, about half of the figures are cleand up, but that is a good job for afrer work when I usually get just about 15-30 minutes for modelling per day.
26 November 2023, 19:55
![](/profiles/img/25743-467-s.jpg)
A short update:
The diorama is currently at a standstill because I made a mistake when weighing the resin. The resin is still sticky, but is currently on the radiator to dry (not to cure). I hope that when the resin is halfway solid I can fix the problem with another layer.
20 January, 10:47
![](/profiles/img/46811-191-s.jpg)
I mean the project stash alone looks promising. I have to follow this. ...can't resist...
20 January, 11:04
![](/profiles/img/25743-467-s.jpg)
Due to the problems with the resin not hardening, I decided to start the base plate all over again. I bought a new picture frame today and have already glued the plywood panel in place. Of course I will try to salvage as many parts as possible from the first attempt, e.g. the bridge and the reed plants from Eduard.
30 January, 20:32
![](/profiles/img/125872-847-s.jpg)
Respekt!!! 👍 Viel zu klein für mich … glaub ich bleib bei 1/72 und größer 🤣
11 February, 18:37
![](/profiles/img/25743-467-s.jpg)
Thank you both very much. @Atomicdelirium: I Hope to get so far next weekend. Before that, a few washes need to be applied to make the ground more interesting and the aquatic plants need to be added. @Thomas: 1/72 ist mir eigentlich auch lieber, aber als ich die Figuren gesehen habe konnte ich nicht wiederstehen.
11 February, 19:04
![](/profiles/img/13641-502-s.jpg)
Regarding the Walrus' windows - decal stripes perhaps? Black or silver?
18 February, 19:42
![](/profiles/img/25743-467-s.jpg)
Hi Łukasz, thanks for the Idea. I will use an Instruction, scale it down and cut the decals from an "Balkenkreuz" decal from the sparesbox.
Today I tried again with the water. My diorama seems to be tight this time, although the water level has also dropped this time. Hopefully everything will be hard too. But I won't be able to say for a few days. There won't be any pictures until then, unfortunately the diorama can't be moved at the moment.
18 February, 20:01
![](/profiles/img/25743-467-s.jpg)
Thanks Jennifer. This Time it worked better. There is still some internal leakage, as the water level droped about 3 mm over night, but there is no resin on the outside. The resin-residue in the mixing container is after 26 h harder than the first try after 2 month. But with about 5 days cureing time I'm not totally sure yet.
19 February, 18:59
![](/profiles/img/25743-467-s.jpg)
I made good progress this weekend, but I discovered, that "planting" the reeds is suprisingly time consuming with about half of it done in nearly 5 hours.
25 February, 18:32
![](/profiles/img/25743-467-s.jpg)
Since I didn't get to build last weekend due to a hand injury and my visit to the exhibition, I made some progress on the diorama this weekend. Almost 3 hours of work on grass and reeds, as well as the first flowers and preparations for the first bushes / trees and the place for the couple in the reeds have taken place.
10 March, 20:07
![](/profiles/img/34360-107-s.jpg)
Get well soon. Looks good so far. I think the lake turned out great with the stuff floating in it.
10 March, 20:36
![](/profiles/img/25743-467-s.jpg)
Hi Shar, thank you. The lake isn't done. The floating stuff is there just by acident. I'm going to clean is, add some drifting wood in the reeds and a second layer of resin. Than the 2 boats and all the floating gras can be added and fixed with some water effects. I do it that way for two reasons:
1: I got the leak where resin went missing under the frame and the water level is not high enogh.
2: I hope the resin in the first layer has seald the gaps in the reeds, so the second layer will not "climb" due to the capillary effect.
11 March, 06:06
![](/profiles/img/25743-467-s.jpg)
Thanks for your interest and the likes.
Last week I worked at the figures, partly repainting with acrylics, and starting modifying everything with oils. Work still in progress. there are 2 figures I don't realy like so far, perhaps that will change after a matt coat.
28 March, 20:31
![](/profiles/img/25743-467-s.jpg)
Most of the parts ar together now. Having trouble with my Printer means the decals for the Windows of the plane are still missing. I also realized today that I forgot to build toolboxes, so I made up for that today.
Thanks for your likes and your interest.
5 May, 17:24