EA-6B Dark Prowler
Kommentarer
131 13 October 2023, 14:51
Andreas Lux
Thank You mates! I updated the album with pictures of a new nozzle.
Thank You mates! I updated the album with pictures of a new nozzle.
16 October 2023, 09:38
Treehugger
I've been on the lookout for a heh cheap kit of the four crewed EW Prowler jet in 1:48, interested in how this will turn out.
I've been on the lookout for a heh cheap kit of the four crewed EW Prowler jet in 1:48, interested in how this will turn out.
16 October 2023, 09:48
Marek Valko
Have many of these in stash so will be great to see the process. Nice build so far.
Have many of these in stash so will be great to see the process. Nice build so far.
18 October 2023, 12:31
Andreas Lux
Thank You! Today I'll show you pictures of the brake flap with a gap hack ( say that ten times 😉 )
Thank You! Today I'll show you pictures of the brake flap with a gap hack ( say that ten times 😉 )
25 October 2023, 16:19
Marek Valko
Do you plan fill these gaps in air intakes? If yes could you pls share step by step process? Thx.
Do you plan fill these gaps in air intakes? If yes could you pls share step by step process? Thx.
8 November 2023, 12:25
Andreas Lux
Hi Marek, please excuse me, I probably worked too quickly, I've already installed the air inlets. Unfortunately I didn't take any step by step photos. I filled the gaps with putty and smoothed it out with a damp cotton swab. I have put a photo of the filler in the gallery. Hope this is of some help to you.
Hi Marek, please excuse me, I probably worked too quickly, I've already installed the air inlets. Unfortunately I didn't take any step by step photos. I filled the gaps with putty and smoothed it out with a damp cotton swab. I have put a photo of the filler in the gallery. Hope this is of some help to you.
8 November 2023, 14:23
Marek Valko
No problem 🙂 I am just curious, cause after I will finish my Viking I want to start on Prowler from Death Jesters (last prowler marking) so any advice for intakes will be fine cause I know that is limited space there.
No problem 🙂 I am just curious, cause after I will finish my Viking I want to start on Prowler from Death Jesters (last prowler marking) so any advice for intakes will be fine cause I know that is limited space there.
8 November 2023, 20:00
David H
Oooh, I'm liking this VERY much. Beautiful pit. Can't wait to see this finished. Did you spray or dip the canopies with the gold ?
Oooh, I'm liking this VERY much. Beautiful pit. Can't wait to see this finished. Did you spray or dip the canopies with the gold ?
16 December 2023, 21:12
Andreas Lux
Hi David, thank you very much! I sprayed the gold color. I tested this before on an old CD case with different colors. This clear gold was the only one I liked.
Hi David, thank you very much! I sprayed the gold color. I tested this before on an old CD case with different colors. This clear gold was the only one I liked.
16 December 2023, 21:25
David H
I've just done similar with a yf23 but I mixed clear yellow and clear red, diluted with future. I wasn't brave enough to spray so they got dipped 🤣
I've just done similar with a yf23 but I mixed clear yellow and clear red, diluted with future. I wasn't brave enough to spray so they got dipped 🤣
17 December 2023, 11:38
Andreas Lux
David, that sounds very interesing. Did the dipping work to your satisfaction? Do you have a photo of the Canopy in the gallery of your YF-23?
David, that sounds very interesing. Did the dipping work to your satisfaction? Do you have a photo of the Canopy in the gallery of your YF-23?
17 December 2023, 19:46
Andreas Lux
Thank you Adri-x! The Prowler isn't finished yet 😉 Some details are still missing...
Thank you Adri-x! The Prowler isn't finished yet 😉 Some details are still missing...
17 December 2023, 20:31
David H
The dipping didn't come out too well. Nothing to do with the colour mix which was brilliant, just that dipping left some unevenness in the finish which meant removal and doing again. Next time I'm going to spray it 🤣
The dipping didn't come out too well. Nothing to do with the colour mix which was brilliant, just that dipping left some unevenness in the finish which meant removal and doing again. Next time I'm going to spray it 🤣
19 December 2023, 16:54
Andreas Lux
I have uneven finishes every time I dip canopies in floor glosser - I know that 🤣
I have uneven finishes every time I dip canopies in floor glosser - I know that 🤣
19 December 2023, 20:52
Andreas Lux
Hello Michael, thank you! This was the most complex single 1:48 scale model I have ever built. To be honest, I'm really glad it's finished. At times I thought it would never be finished. But in the end I'm glad I stuck it out 😉
Hello Michael, thank you! This was the most complex single 1:48 scale model I have ever built. To be honest, I'm really glad it's finished. At times I thought it would never be finished. But in the end I'm glad I stuck it out 😉
12 January, 19:40
Andreas Lux
Thank you Alexander and kab5100 !
I'm still waiting for better weather so I can take more photos outside.
Thank you Alexander and kab5100 !
I'm still waiting for better weather so I can take more photos outside.
15 January, 18:56
JBK
It looks so good! Nice paint and weathering and lot of details. Fantastic. This kit is also in my stash and waiting for its time…
It looks so good! Nice paint and weathering and lot of details. Fantastic. This kit is also in my stash and waiting for its time…
15 January, 19:41
kab5100
Is there a fitting problem in this kit? It seems that you used a lot of putty and other stuffs to fill gaps during the assembling stage.
Is there a fitting problem in this kit? It seems that you used a lot of putty and other stuffs to fill gaps during the assembling stage.
16 January, 04:25
Andreas Lux
Hello JBK, thank you very much!
Hello kab5100, there is no real problem with the fit. This can all be solved with Putty. But it depends on your personal point of view how much you tolerate unevenness in the fit. This is an older kit from Kinetic, but a good one for the time. There's a reason Kinetic markets the Gold series as "better" quality. In short: the fit is not bad but not perfect either. Putty is necessary, but not excessive.
Some experience in plastic model making is necessary, as, for example, you have to glue the cockpit hoods together from two transparent parts. To show folded wings you have to saw the wings, slats, flaps and spoilers. When assembling the folded wings you have to work very carefully so that they don't look crooked. These are jobs that require patience and care.
The Dark Prowler kit decals are great!
But! ...The kit has another problem. The instructions are wrong in many areas! The "real" Prowler has received many upgrades over the course of its life, which is particularly visible in the different antenna configurations. The "Dark Prowler" is the latest ICAP variant. The parts for this variant are included in the kit but are not shown in the instructions. For a correct representation you have to use reference photos - that is my strong recommendation.
I don't want to scare anyone away from the Kinetic Prowler, on the contrary: if I wanted to build a Prowler again I would choose the Kinetic kit again. With reference photos, patience and some putty, this can become a beautiful project.
I marked the issues that I encountered during construction in the instructions and put them in the gallery.
Hello JBK, thank you very much!
Hello kab5100, there is no real problem with the fit. This can all be solved with Putty. But it depends on your personal point of view how much you tolerate unevenness in the fit. This is an older kit from Kinetic, but a good one for the time. There's a reason Kinetic markets the Gold series as "better" quality. In short: the fit is not bad but not perfect either. Putty is necessary, but not excessive.
Some experience in plastic model making is necessary, as, for example, you have to glue the cockpit hoods together from two transparent parts. To show folded wings you have to saw the wings, slats, flaps and spoilers. When assembling the folded wings you have to work very carefully so that they don't look crooked. These are jobs that require patience and care.
The Dark Prowler kit decals are great!
But! ...The kit has another problem. The instructions are wrong in many areas! The "real" Prowler has received many upgrades over the course of its life, which is particularly visible in the different antenna configurations. The "Dark Prowler" is the latest ICAP variant. The parts for this variant are included in the kit but are not shown in the instructions. For a correct representation you have to use reference photos - that is my strong recommendation.
I don't want to scare anyone away from the Kinetic Prowler, on the contrary: if I wanted to build a Prowler again I would choose the Kinetic kit again. With reference photos, patience and some putty, this can become a beautiful project.
I marked the issues that I encountered during construction in the instructions and put them in the gallery.
16 January, 11:37
Michael Kohl
Although I might never build a Prowler myself, your insights are very valuable. Thanks for sharing.
Although I might never build a Prowler myself, your insights are very valuable. Thanks for sharing.
16 January, 11:48
kab5100
Thanks for answering my question, I will take your words as a reference if I someday finally decide to build a 1/48 EA-6B myself !
Thanks for answering my question, I will take your words as a reference if I someday finally decide to build a 1/48 EA-6B myself !
16 January, 12:42
Cristian A
sorry for the emote, I meant :wow: but the chat is wrongly displayed. Excellent model and presentation photo at the end, very well selected! Congrats again
sorry for the emote, I meant :wow: but the chat is wrongly displayed. Excellent model and presentation photo at the end, very well selected! Congrats again
17 May, 16:01
Album info
the Prowler is still a work in progress....