Logo
base de datos de modelismo a escala | gestor de almacén

Crusader Mk.III

British Cruiser Tank Mk. VI

Border Model | No. BT-012 | 1:35

Boxart Crusader Mk.III BT-012 Border Model

Hechos

Marca:
Border Model
Título:
Crusader Mk.III British Cruiser Tank Mk. VI
Número:
BT-012
Escala:
1:35
Tipo:
Kit completo
Publicado:
2020 Nuevos moldes
Código de barras:
6971995749271 (EAN)
Embalaje:
Caja rígida (apertura superior)
Tema:
A15 Crusader » Tanques (Vehículos)

Marcas

A15 Crusader

Crusader Mk.III
GB British Army (1660-now)

Contenido de la caja

Bebedero de plástico (Clear), Bebedero de plástico (Light gray), Piezas fotograbado (Brass), Metal torneado (Steel), Hoja de calcas (al agua) (Multi-colored), Coleccionables (Light gray), Instrucciones (papel) (Black & white), Vinilo (Black)

Dimensiones:
360x250x80 mm (14.2x9.8x3.1 inch)

Peso:
720 g (1.59 lbs)

Boxart diseñado por Jason Wong

Línea temporal del producto

 
Border Model
Platz
Historia completa »

Instrucciones

Descargar 2367Kb (.pdf)

Mercado

Tiendas en línea
Logo Squadron Hobbies
USD 52.47
USEn stock »
Logo Hobbylinc.com
USD 59.59
USEn stock »
Logo Sprue Brothers Models
USD 59.99
USEn stock »
Logo Super-Hobby.com
USD 65.57
PLEn stock »
Logo MegaHobby.com
USD 75.99
USEn stock »
Logo BNA Model World
AUD 98.51
AU USD 66.91En stock »

Mostrar todas las ofertas » (12 en total)

SKU alternativos para Border Model BT-012:
BOR-BT-012 | 6971995749271 | BT012 | BORDER-BT-012 | BT 012 | 82414

Nota: Los precios y la disponibilidad son sólo indicaciones. ¡Compruebe si el producto realmente coincide!

Productos relacionados

BL35425K
British Crusader Stowage
Blast Models 1:35
BL35425K 2022 Nuevos moldes
MR-35656
Gun Barrel L/43 57mm (6 pdr.) Mk. V for Crusader III
MR Modellbau 1:35
MR-35656 2021 Nuevos moldes
MR-35655
Gun Barrel L/43 57mm (6 pdr.) Mk. III for Crusader III
MR Modellbau 1:35
MR-35655 2021 Nuevos moldes
QW-261
Wheel Mask
Crusader Mk.III for Border
Quickwheel 1:35
QW-261
RE35-558
Sandbags armor for A15 "Crusader"
Panzer Art 1:35
RE35-558 2021

Todos los productos relacionados » (24 en total)

Revisiones de caja

Reseñas externas
Anuncio
OD-Factory
Revisión en caja
OD-Factory
Panzer Modell
Revisión en caja
Panzer Modell
Revisión en caja Modellbau-Koenig

Todas las reseñas » (12 en total)

Revistas

(Military Modelcraft International Volume 25 Issue 09)
(Airfix Model World Issue 150)
Airfix Model World | Issue 150
English (TOC: 27 lines)
May 2023

Proyectos

Crusader Mk 3
6 imágenes
View album, image #1
1:35
Proyecto: Crusader Mk 3
1:35 Crusader Mk.III (Border Model BT-012)
Crusader III, El Alamein
16 imágenes
View album, image #2
1:35
1:35 Crusader Mk.III (Border Model BT-012)1:35 Stowage set for A15 'Crusader' (Panzer Art RE35-552)
Crusader Mk.III - 3rd County of London Yeomanry
10 imágenes
View album, image #1
1:35
Proyecto: Crusader Mk.III
1:35 Crusader Mk.III (Border Model BT-012)
Border models Crusader
5 imágenes
View album, image #1
1:35
1:35 Crusader Mk.III (Border Model BT-012)

Comentarios

Ron Garcia
A couple of things to add to what has already been said about this kit. This is my first Border Model kit. Overall, they did a fine job with it as I had no fit issues. However...

As I've read from others, the tracks are a MAJOR pain! I knew this coming in, though, so I have no one to blame but myself. The plastic is super soft so many pins will inevitably bend when you try to inset them. I used a needle and swirled it around to open the holes before adding each pin. Most of the time this worked, sometimes not. If the pin bent, rinse and repeat. Some tracks actually have one side flashed over so check both sides before committing to a pin.

I already knew for my sanity that I would use the side skirts so I wouldn't have to make two full runs. If you use 17 tracks on either side of part C40 (a long pre-built track piece), one side will wrap over the top of the drive sprocket and the other will go 3/4th of the way up the idler wheel. You could go +/- one or two links on either side as you desire. Even doing just that small amount and using part C40 it took me more than three torturous hours to put both sides together! To top it all off, C40 doesn't even have any molded on pins! I will say, however, is that the tracks actually do articulate which is more than I can say about some other so-called working tracks.

The PE is a mixed bag. Some have bends etched on them, some don't. So you have to be very careful about bending them. I'm sure I jacked up the antenna mount Y2 since there are no directions on how to fold it, but I got the top level and the correct angle so I consider that a victory. PE pieces Y10 and Y11 are also fun because they have no bend lines. My recommendation is to place the biggest part against C24/C25 and slightly bend the front and back sections forward. The PE is stiff so at that point use a PE bending tool or you will have rounded edges.

One other strange omission is a missing fuel line from the drum to the aft of the tank. There is a fuel line, but it attaches to a PE piece that is offset several mm from the tank. I cut a barrel of a machine gun in my spares box and fit it into the void.

Really, if this kit had better tracks and PE, I would totally recommend it. As it is now, I wouldn't say don't buy it, but be prepared for some very frustrating modeling. This kit is definitely NOT for the beginner!
1 30 January 2023, 02:47
Juepak
Nicely detailed but...
1.the plastic is extremely soft (I've heard this comment from other modelers) which requires extra care when sanding otherwise it is too easy to over do it.
2. The instructions are incomplete. If you want the track suspension to work then do not cement the two bottom pins on the axles - the instructions don't highlight this, you need to work it out for yourself.
3. The tracks are a nightmare. The holes for the pins are too small and require drilling, the pins are too soft and bend and break and the tracks themselves will tear open (see 1.) I drilled the holes with a 0.4 MM bit (which is pretty small) but the pins are tapered and don't grip their full length. Use a touch of glue and the tracks don't move. After 4 hours of different attempts I gave up and ordered a Fruil Model set.
4. Comes with a nice metal barrel but the metal barrel has no male to fit the female of the mantel - so I reverted to the plastic.
5. The cradle for the gun set is very rudimentary and there is no real base to secure it.
6. The gun mantle leave a gap into the turret. 7. Comes with photo etch but no step-by-step instructions on how to execute multi-fold pieces and only some of the pieces have fold lines marked.
8. A couple of pieces I couldn't even find on the drawings. All in looks like a first attempt kit - and this may explain why there is a separate single unit insignia decal to go with the two on the main sheet - almost as though it was forgotten.

All in all 5/10.
7 26 April 2021, 13:07
Rick402
Yes I wish I wouldnt have wasted my hard earned dollars on this kit. I'm at the tracks now and I'm Fking pissed. I'm not ordering fruits cause everyone is out. Glad border was smart enough to add the link and length option. That's how I'll finish the tracks. To be honest I'm never buying a border models kit again, and I have 3 others in my stash yet. Thinking of selling them.
22 July 2021, 20:33

A15 Crusader

Material de referencia

Crusader Cruiser Tank Mk. VI (Model Centrum Progres 6)
Crusader Cruiser Tank Mk. VI
Armor PhotoGallery No. 6
Wojciech J. Gawrych
2003
Crusader and Covenanter Cruiser Tanks 1939–45 (Osprey Publications 14)
Crusader and Covenanter Cruiser Tanks 1939–45
New Vanguard No. 14
David Fletcher
1995

Todos los libros » (4 en total) Todos los walkarounds » (2 en total)