Muro
Wall
Juepakquiere este artículo
Sd.Kfz.164 Hornisse (Nashorn, Early Variant) W/ Magic Track, Aluminum Barrel and four figures
Dragon 1:35
6414MT (6414) 2023 Nuevas piezas 25 April, 17:11
April 24, 2024
Juepakquiere este artículo
Tiger I Initial Production s.Pz.Abt.502 Leningrad Region 1942/43
Dragon 1:35
6600 2024* Nuevas piezas 24 April, 17:30
April 4, 2024
February 21, 2024
MiniArt 1:35
February 18, 2024
February 8, 2024
February 7, 2024
January 27, 2024
January 8, 2024
JuepakGenerally a nice kit 7/10. Issues: 1. Rubber band tracks - I swapped in link and link tracks from a Zvezda kit. 2. The rockets have two out of scale rings around the circumference that makes them too big to sit inside the launcher crates (also incorrect as per historical photos) - I swapped the kit's rockets for spares from the excellent Miniart No. 35269 German Rocket Launcher. 3. MAJOR ISSUE: step 22 and 23 instructions for part N20 are incorrect and should be ignored. Step 27 should be used for the placement of N20 - if you use steps 22 and 23 its too late 🙁
1 8 January, 09:21
October 20, 2023
Juepakquiere este artículo
Pz.Kpfw.IV Ausf.G w/Winterketten w/Winterketten
Rye Field Model (RFM) 1:35
RM-5102 (RM5102) 2023 Nuevas piezas 20 October 2023, 17:48
October 19, 2023
Juepakquiere este artículo
Sd.Kfz.166 Stu.Pz.IV 'Brummbar' Early Production (The Battle of Kursk)
Dragon 1:35
6992 2023 Nuevas piezas 19 October 2023, 14:38
Juepakquiere este artículo
German Sd.kfz.166 STURMPANZER IV 150mm Metal Gun Barrel 1 PCS
Yan Model 1:35
PE-35102 2023 Nuevos moldes 19 October 2023, 14:37
September 28, 2023
Juepakquiere este artículo
Pz.Kpfw. VI Ausf. E Sd.Kfz. 181
Tiger I Early Production, Wittmann's Command Tiger w/Magic Track Dragon 1:35
6730MT 2022 Nuevas piezas 28 September 2023, 17:15
September 26, 2023
September 24, 2023
September 21, 2023
September 13, 2023
September 4, 2023
August 14, 2023
Juepakquiere este artículo
German Infrared Night-Vision Devices Infrarot Scheinwerfer (2 in 1; Also distributed by Lion Roar in Orig. Packaging)
Great Wall Hobby (GWH) 1:35
L3515 14 August 2023, 11:15
July 8, 2023
JuepakFit is typlical for an RFM kit. However, there are issues. Instruction step 12 requires holes drilled on the underside right side of the upper casement - but there is nothing to place there - so you then need to fill the holes - the holes may be needed for the interior kit (?). I corrected it by placing T-34 tracks over them on the final kit. The gun carriage appears too low - the gun barrel does not have sufficient evelation because the empty shell bag hits the floor. I suspect that step 9 part G5 requires the mirror G4 piece beneath it to add height (which is not in the instructions) - or remove the shell bag. The kit has an interior version, and assuming the parts are the same for the interior version the biggest issue with the kit is that many of the interior and external parts have moulding marks that will need copious sanding to remove. The separate RFM "extras" set has generous photo etch - but advertises a 3-D muzzel brake when the actual is a barrel travel cover.
1 8 July 2023, 13:10
July 4, 2023
July 3, 2023
June 4, 2023
JuepakNice barrel, but either the shells or the model are not sized correctly - the shells are too long to fit the chamber.
1 4 June 2023, 07:14
May 21, 2023
JuepakThere are no guide holes for the flak gun base plate. There are very mild indentations but no guide holes. If you use the indentations the larger platform that the gun has knocks into the rear seat. Best to remove. The decals are all too large for the dash board locations.
21 May 2023, 10:28
May 7, 2023
JuepakTremendous amount of flash. Could probably of built the kit in half the time if not for all the flash. Fit is not too great.
7 May 2023, 13:14
wnolder.php?lang=es
2023-05-07 13:14:00
2021-01-28 03:58:24
89511
/ajax/wnolder.php?lang=es&sd=2023-05-07 13:14:00&md=2021-01-28 03:58:24&filter=&w=89511
todo