News Feed
Rando
添加了一个新相册
添加了一个新相册
16 图片
CVW-16 Crusaders double build: RF-8G with F-8E escort新的: 29 May, 03:45 1:72
I repainted Schaffert’s helmet—I like it much better now
All comments (17) » 35 26 February, 14:43
Rando
Pilots are fully painted now. The F-8E pilot is based on Dick Schaffert, who was a pilot on this 1966 cruise. While I don't know of any specific plane he flew, F-8 pilots often flew jets that were assigned to others, so he's flying 149180 on this escort mission. In order to accommodate them, I had to remove the rudder pedals and front of the cockpit tub on the F-8E. It won't really be visible when the cockpit is buttoned up anyway.
Pilots are fully painted now. The F-8E pilot is based on Dick Schaffert, who was a pilot on this 1966 cruise. While I don't know of any specific plane he flew, F-8 pilots often flew jets that were assigned to others, so he's flying 149180 on this escort mission. In order to accommodate them, I had to remove the rudder pedals and front of the cockpit tub on the F-8E. It won't really be visible when the cockpit is buttoned up anyway.
27 May, 14:17
Rando
I didn't like how the Sundowner helmet turned out so I stripped the paint and airbrushed it this time with tiny wedges of tape, then shaped and touched up everything. Just need to add a black stripe for the visor groove.
I didn't like how the Sundowner helmet turned out so I stripped the paint and airbrushed it this time with tiny wedges of tape, then shaped and touched up everything. Just need to add a black stripe for the visor groove.
29 May, 03:49
Clifford Keesler
添加了一个新相册
添加了一个新相册
All comments (9) » 18 1 May, 22:19
Clifford Keesler
One of these days I will finish this thing. I finished the decals today, at last.
One of these days I will finish this thing. I finished the decals today, at last.
25 May, 01:11
Clifford Keesler
Got the wash on and off today and everything sealed, next flat coat and weathering. Pictures coming soon.
Got the wash on and off today and everything sealed, next flat coat and weathering. Pictures coming soon.
29 May, 03:24
Calvin Gifford
This is a double. Original entry never came up until I went to add a review!
This is a double. Original entry never came up until I went to add a review!
Tactical Air Command Badges
Caracal Models 1:48
CDB48007 29 May, 03:07
Habu1271
Just finished it. A delight to build! No major issues...except...this really need metal main gear. Or at least a wire core. That forward caster is so extreme that I had to reinforce it with plastic and brass rods. No other issues.
Just finished it. A delight to build! No major issues...except...this really need metal main gear. Or at least a wire core. That forward caster is so extreme that I had to reinforce it with plastic and brass rods. No other issues.
29 May, 02:35
MioMyosky
添加了一个新相册
添加了一个新相册
9 17 June 2023, 20:37
David Orr
Lovely little kit. I had to buy this one as it has my initials on it. Can't wait to build it.
Lovely little kit. I had to buy this one as it has my initials on it. Can't wait to build it.
29 May, 02:26
Donald Dickson II
添加了一个新相册
添加了一个新相册
All comments (11) » 16 17 May, 01:37
David H
Cheers Don, I'm definitely giving that a try. Just got to find some paint 😁👍🏻 which I've just learned from a quick google search is known as "emulsion" here in the UK ! 😁
Cheers Don, I'm definitely giving that a try. Just got to find some paint 😁👍🏻 which I've just learned from a quick google search is known as "emulsion" here in the UK ! 😁
23 May, 07:51
Donald Dickson II
Its a mess, but it works pretty well. 🙂
Got the tires on, front landing gear on. These things look fantastic in place. Again, cant recommend them enough. Ill be using his products more often I think. Also, I got one seat done with the PE belts. Man its tedious. Doing just this convinces me I will NEVER do a freaking ship. LOL
Its a mess, but it works pretty well. 🙂
Got the tires on, front landing gear on. These things look fantastic in place. Again, cant recommend them enough. Ill be using his products more often I think. Also, I got one seat done with the PE belts. Man its tedious. Doing just this convinces me I will NEVER do a freaking ship. LOL
29 May, 02:17
Sam L
添加了一个新相册
添加了一个新相册
All comments (6) » 13 1 March 2023, 09:17
David Orr
What a work of art. Mine has been in the closet for 24 years, but will be making an appearance later this year I hope.
What a work of art. Mine has been in the closet for 24 years, but will be making an appearance later this year I hope.
29 May, 02:03
Donald Dickson II
添加了一个新相册
添加了一个新相册
All comments (32) » 28 12 January, 01:54
Donald Dickson II
Got the engine pylon joins as good as Im gonna get em. Engines covered. Gotta hit the nose one more time with flat black, mask the canopy and attach it, then painting this behemoth can commence.
Got the engine pylon joins as good as Im gonna get em. Engines covered. Gotta hit the nose one more time with flat black, mask the canopy and attach it, then painting this behemoth can commence.
23 May, 00:59
Donald Dickson II
Got some aluminum on. I cant do anything else until I get a paint booth. The new fan nozzle throws a lot more paint than I was expecting. About gagged myself. So one is in my cart at the Zon awaiting payday.
Got some aluminum on. I cant do anything else until I get a paint booth. The new fan nozzle throws a lot more paint than I was expecting. About gagged myself. So one is in my cart at the Zon awaiting payday.
29 May, 02:01
Brian Snow
添加了一个新相册
添加了一个新相册
2 19 February, 22:04
David Orr
Nice job. I'm hoping to start mine in the next few weeks. It's been in the closet for about 24 years and needs to see the light of day. Which paint did you use?
Nice job. I'm hoping to start mine in the next few weeks. It's been in the closet for about 24 years and needs to see the light of day. Which paint did you use?
29 May, 01:49
JW
添加了一个新相册
添加了一个新相册
All comments (10) » 20 13 April, 22:00
JW
Thanks gents. Trez didn't mean to mislead anyone with those pics from the Smithsonian. I wish I could make it look that realistic.
Thanks gents. Trez didn't mean to mislead anyone with those pics from the Smithsonian. I wish I could make it look that realistic.
28 May, 20:59
Trez Mackenzie
I think I mislead myself - still, it's a good point; how to build an engine that realistic? What is it that acts as a stumbling block?
I think I mislead myself - still, it's a good point; how to build an engine that realistic? What is it that acts as a stumbling block?
29 May, 01:46
Richie Pleasants
添加了一个新相册
添加了一个新相册
12 January 2023, 03:27
David Orr
You obviously didn't read the instructions. Your not supposed to put it on the washing machine. 🤣 Nice work on these tiny models. I love the periscope.
You obviously didn't read the instructions. Your not supposed to put it on the washing machine. 🤣 Nice work on these tiny models. I love the periscope.
29 May, 01:44
Carlos Cisneros
添加了一个新相册
添加了一个新相册
All comments (17) » 48 4 March, 19:09
Carlos Cisneros
Mr D, Nathan, & Guy, thank you one and all for your kind feedback! I must say that I do have a soft spot for these Otaki/Arii kits. Not the best kits of the subjects, but with a little extra effort and TLC, the will shine, and don't cost a crazy amount.
Mr D, Nathan, & Guy, thank you one and all for your kind feedback! I must say that I do have a soft spot for these Otaki/Arii kits. Not the best kits of the subjects, but with a little extra effort and TLC, the will shine, and don't cost a crazy amount.
28 May, 19:53
Guillaume Blanchet
添加了一个新相册
添加了一个新相册
9 5 May, 23:39
Guillaume Blanchet
Welcome aboard. This will turn out to be a quick build as the fit is as good as Tamiya would be.
Welcome aboard. This will turn out to be a quick build as the fit is as good as Tamiya would be.
6 May, 15:07
Guillaume Blanchet
Almost done. It was a very enjoyable to kit work with so far. The only downside I have seen is that the glue used on the masks for the wheels & windows is very strong. When was removing it from the wheels, the glue transferred on the part making tacky. I had to clean the wheels & repaint some part of it.
Almost done. It was a very enjoyable to kit work with so far. The only downside I have seen is that the glue used on the masks for the wheels & windows is very strong. When was removing it from the wheels, the glue transferred on the part making tacky. I had to clean the wheels & repaint some part of it.
29 May, 00:24
Spence Wilson
添加了一个新相册
添加了一个新相册
4 28 May, 22:05
Ben M
Beautiful build. Engine looks great.
A bit of a trip down memory lane, my first car was a 72 510.
Beautiful build. Engine looks great.
A bit of a trip down memory lane, my first car was a 72 510.
28 May, 23:55
Rudy Poseika
添加了一个新相册
添加了一个新相册
All comments (11) » 17 26 April, 22:47
Bruce Huxtable
Watching in admiration, Rudy. It looks like a very interesting kit, and the challenges will all be worth while 😉
Watching in admiration, Rudy. It looks like a very interesting kit, and the challenges will all be worth while 😉
12 May, 17:52
Rudy Poseika
Recently started work on Cargo Truck... Slow progress but getting there. Bits of two other kits to follow. Then figure out how to make the diorama base etc...
Recently started work on Cargo Truck... Slow progress but getting there. Bits of two other kits to follow. Then figure out how to make the diorama base etc...
28 May, 22:41
Jungwon Lee
添加了一个新相册
添加了一个新相册
19 28 May, 02:33
Treehugger
Nice.
I recently had the opportunity to buy a 1:48 Hasegawa Hornet jet at half price, but I had then already bought so much (a lot) and I didn't like the goofy decals. 😄
Nice.
I recently had the opportunity to buy a 1:48 Hasegawa Hornet jet at half price, but I had then already bought so much (a lot) and I didn't like the goofy decals. 😄
28 May, 07:46
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo