Зид
Wall
Skyhikerдодао је нови фотоалбум.
58 слике
Focke Wulf Ta 152 H-1 (1970 tooling)
1:72
Panel lines are finished on the underside of the wings.
Пројекат: Focke-Wulf Ta 152 H
All comments (88) » 51 27 January, 18:23
SkyhikerThanks Ben, this kit gets a bad rap. It's not as bad as people make it out to be. Of course I am putting a lot of work into it to make it better. But if its done straight out of the box it's not that bad. The backwards propeller is a stupid engineering mistake but that's an easy fix.
31 May, 23:54
May 30, 2024
May 29, 2024
Skyhikerје власник овог предмета
Micro Brass Tube / 0.9mm OD x 0.7mm ID x 305mm L
Albion Alloys
MBT09 29 May, 14:44
May 27, 2024
May 26, 2024
May 25, 2024
SkyhikerIs there a way to see a list of products that member's have on their trade lists? I'm not looking for anything in particular but want to browse for deals.
25 May, 13:50
May 24, 2024
May 23, 2024
SkyhikerI bought this blade and unfortunately it broke within a day of use. I wrote to the manufacturer requesting a replacement today. I'll let you know if they respond.
BD0042 Fine Engraving Blade 0,1 mm
Border Model
BD0042 1 23 May, 14:41
May 21, 2024
Skyhikerје власник овог предмета
Tamiya Craft Tools Series
Modelling Template (Square, 1-10mm) For Advanced Users Tamiya
74156 (No.156) 2020 Нови алат 21 May, 14:56
Skyhikerје власник овог предмета
Tamiya Craft Tools Series
Modelling Template (Round, 1-12.5mm) For Advanced Users Tamiya
74150 (No.150) 2019 Нови алат 21 May, 14:54
Roden 1:72
May 20, 2024
May 19, 2024
May 18, 2024
May 17, 2024
May 14, 2024
May 13, 2024
May 11, 2024
May 10, 2024
May 7, 2024
Skyhikerдодао је нови фотоалбум.
1 слике
MiG-29UB Fulcrum
1:72
This is an ancient model that I hand painted with enamel about 30 years ago. It is one of my earliest.
Пројекат: MiG-29UB Fulcrum
1 7 May, 21:56
May 6, 2024
May 4, 2024
Skyhikerдодао је нови фотоалбум.
All comments (17) » 59 22 December 2019, 12:10
Michael KohlLooks beautiful. I still fight an uphill battle with my Revell 1:144 one. Yours being Heller moulds I suppose building it was more straightforward. Good, that you kept the nose up. Looks better that way. 🙂
4 May, 11:34
SkyhikerThanks guys. The nose on this kit has a lot of issues. I scratch built the inside of the nose floor and kept it in the up position because the engineering was very poor. Other than that the kit is great and went together quickly.
4 May, 16:16
May 2, 2024
April 30, 2024
April 21, 2024
April 10, 2024
SkyhikerThis kit is very old and has many flaws. Expect to do a lot of scratch building if you want to make it look acceptable.
1 10 April, 16:17
April 4, 2024
April 3, 2024
March 21, 2024
March 6, 2024
March 3, 2024
February 25, 2024
February 23, 2024
Skyhikerдодао је нови фотоалбум.
5 слике
Arado Ar. E 555
1:72
Don't mind the photo edit on the vertical stabilizer, just trying to follow current German law.
Пројекат: Arado Ar. E 555
All comments (25) » 68 5 November 2022, 21:02
February 17, 2024
February 8, 2024
February 5, 2024
February 2, 2024
February 1, 2024
January 31, 2024
January 30, 2024
January 29, 2024
January 27, 2024
Skyhikerдодао је нови фотоалбум.
All comments (41) » 61 19 March 2023, 17:36
SkyhikerNicolas I started putting my models in frames, as a temporary solution to keep the dust off of them, after I found a model on my shelf covered with an inch (2cm) of dust. The mirror I stuck underneath the plane because I wanted to be able to see the bottom of the plane. Some day I hope to have enough room to make a proper display case with dramatic lighting, but for now the frames will have to do. They are pretty versatile but have some draw backs. Acrylic cases would be better because then I could see more of the plane, but I can't afford that. The frames are 7 times cheaper to make.
27 January, 14:07
SkyhikerThomas, thanks for the compliment. The canopy mirror from the kit was just a dumb little bump that I ended up sanding off. I replaced it with a cut down needle and some styrene after looking at photos of the original plane. It was hard to find vintage photos but eventually I came across a few. I think it came out pretty well considering the 1/72 scale. Of course photo-etch would have been better but I couldn't be bothered with that. I just wanted to finally get it done.
27 January, 14:17
January 22, 2024
January 15, 2024
January 13, 2024
January 11, 2024
January 10, 2024
January 3, 2024
January 1, 2024
December 24, 2023
December 13, 2023
December 2, 2023
November 26, 2023
November 17, 2023
November 6, 2023
September 28, 2023
August 14, 2023
June 15, 2023
June 13, 2023
wnolder.php?lang=sr
2023-06-13 19:13:43
2018-12-23 23:12:24
46074
/ajax/wnolder.php?lang=sr&sd=2023-06-13 19:13:43&md=2018-12-23 23:12:24&filter=&w=46074
todo