Стена
Wall
![](/profiles/img/95096-810-s.jpg)
Hi folks. Has anybody built this kit? I was gifted it by Models for Heroes. I seem to be missing a ring around one of the hatches. Part R5 in the instructions. There is no R sprue in the instructions and no other R parts listed on the instructions. Checked all sprues and its not in the box at all.
31 May, 14:56
May 29, 2024
May 26, 2024
![](/profiles/img/95096-810-s.jpg)
добавил новый проект.
All comments (5) » 7 8 April, 07:55
![](/profiles/img/95096-810-s.jpg)
Update 4. 12.05.24. Hello again. It's been awhile since I posted an update on this one. I have finished the main hull of the tank. Painted the main green colour on the hull. I have also made up and painted the 2 tow cables, and fitted them to the hull. Next I have assembled the mine plough attachment. It is only placed in position in the photos. There is still a small chain to add to the mine plough after its been painted. I have shown in the photos the plough in 2 positions. Stowed in the up position, and deployed in the down position. Oh, and I have lost count how many times I have broke off one of those plough heads lights. Hobbyboss provide no clear glass for those headlights either. Plus no clear glass for the rear lights on the hull. Anyway, that's it for now. Enjoy.
12 May, 10:39
![](/profiles/img/95096-810-s.jpg)
Update 5. 26.05.24. Hi again. I have been working on the turret. Clear periscopes were installed first. Then the top and bottom of the turret joined together. I will cover the tops of the periscopes later with liquid masking fluid. The rear turret stowage bins were made up next. Plus the 3 jerry cans in their holders. This was then glued onto the back of the turret. I then made up the 2 side pieces of extra armour. These had individual panels of PE that had to be bent and then glued onto the top of these armour pieces. Then the extra turret armour pieces were glued onto the sides of the turret. This was not easy at all. In the end I had to resort to using super glue. Then I made up the gun mantlet and main gun. The gun does not move, and there is no breach detail for inside the turret. I am rapidly going off Hobbyboss kits now lol. That is all for now. Enjoy.
26 May, 14:46
![](/profiles/img/95096-810-s.jpg)
добавил новый проект.
All comments (7) » 8 1 March, 16:34
![](/profiles/img/95096-810-s.jpg)
Update 6. 14.03.24. Well, things are coming along quite nicely now. I have finished the island control centre apart from the rigging. Waiting on some gel super glue to come to do that. If you look at the photos, you will see that I placed some of those Eduard PE figures inside the bridge areas. Not that many because you can hardly see them. I have placed one guy saluting in there lol. The kit does not come with clear parts for the windows. I made window parts from cuts of a clear acetate sheet, then glued them inside. You can get a pack of 10 sheets of acetate from Amazon for £5. Great for making windows out of. The last gun emplacement has also been fixed to the ship. All that is left to do now, is the cranes and tugs etc. Then its onto the aircraft. I have also got to fit all the aerials to the hull. But I will do that last. Anyway, that's it for now.
14 March, 16:30
![](/profiles/img/95096-810-s.jpg)
Update 7. 26.05.24. Its been awhile since I posted an update on this one. I took a bit of a break from it to concentrate on the C2 Mexas kit. Anyway, I have more or less finished the ship itself. I still have to do the island rigging. Plus paint some of the antennas etc. I have been slowly working on the air wing. I have a load of after market Star Fighter Decals for aircraft. So far, I have finished 2 x E2 Hawkeye's and 2 x A6 Prowlers. I have also finished painting 8 x FA-14 Tomcats. But I have only applied decals to one of those. There are still many aircraft to build up and paint. Oh and I have made up and painted all the cranes and tugs. That's it for now. Enjoy.
26 May, 07:24
![](/profiles/img/95096-810-s.jpg)
добавил новый фотоальбом.
All comments (10) » 24 1 March, 16:41
![](/profiles/img/45816-678-s.jpg)
Nice progress Andrew, I can only guess how big that thing is....! Following your progress.
13 March, 14:15
May 15, 2024
May 5, 2024
April 16, 2024
April 14, 2024
April 12, 2024
March 30, 2024
March 28, 2024
![](/profiles/img/95096-810-s.jpg)
владеет этим предметом
![1:350 USS Enterprise CVN-65 - Markings 1982-2001 (Starfighter Decals 350-53-S) 350-53-S](/products/img/1/9/2/1074192-10105-31-t180.jpg)
USS Enterprise CVN-65 - Markings 1982-2001
Starfighter Decals 1:350
350-53-S (35053) 2017 Новая разработка 28 March, 15:35
![](/profiles/img/95096-810-s.jpg)
владеет этим предметом
![1:35 Tiger II (HobbyBoss 84558) 84558](/products/img/8/0/0/1405800-95338-55-t180.jpg)
Pz.Kpfw. VI Sd.Kfz. 182
Tiger II (Porsche Early production vehicle) Fgst.Nr.280009 HobbyBoss 1:35
84558 2022 Новые детали 28 March, 08:44
March 21, 2024
![](/profiles/img/95096-810-s.jpg)
хочет
![1:16 M8 Light Armored Car Greyhound (Andy's Hobby Headquarters AHHQ-008) AHHQ-008](/products/img/9/3/4/1518934-82068-22-t180.jpg)
M8 Light Armored Car Greyhound
Andy's Hobby Headquarters 1:16
AHHQ-008 (AHHQ008) 2024 Новая разработка 21 March, 15:17
March 13, 2024
![](/profiles/img/95096-810-s.jpg)
владеет этим предметом
![1:350 EA-6B Prowlers VMAQ-2 Play Boys Air Wing 8 USS Nimitz 1981 (Starfighter Decals 350117) 350117](/companies/img/406-10000-99-p.jpg)
EA-6B Prowlers VMAQ-2 Play Boys Air Wing 8 USS Nimitz 1981
Starfighter Decals 1:350
350117 13 March, 10:42
![](/profiles/img/95096-810-s.jpg)
владеет этим предметом
![1:350 VF213 Black Lions 1980s Low Viz F14 Tomcat (Starfighter Decals 350203) 350203](/companies/img/406-10000-99-p.jpg)
VF213 Black Lions 1980s Low Viz F14 Tomcat
Starfighter Decals 1:350
350203 13 March, 10:42
![](/profiles/img/95096-810-s.jpg)
владеет этим предметом
![1:350 VA-22 Fighting Redcocks CVW-11 1980s High Viz (Starfighter Decals 350204) 350204](/companies/img/406-10000-99-p.jpg)
VA-22 Fighting Redcocks CVW-11 1980s High Viz
Starfighter Decals 1:350
350204 13 March, 10:41
![](/profiles/img/95096-810-s.jpg)
владеет этим предметом
![1:350 VS-21 Fighting Redtails 1984 S-3 Viking (Starfighter Decals 350210) 350210](/companies/img/406-10000-99-p.jpg)
VS-21 Fighting Redtails 1984 S-3 Viking
Starfighter Decals 1:350
350210 13 March, 10:41
![](/profiles/img/95096-810-s.jpg)
владеет этим предметом
![1:350 VA-82 Marauders 1978-1981 (Starfighter Decals 350-116-S) 350-116-S](/products/img/1/4/4/976144-12625-36-t180.jpg)
VA-82 Marauders 1978-1981
Starfighter Decals 1:350
350-116-S 13 March, 10:39
![](/profiles/img/95096-810-s.jpg)
пометил этот товар как заказанный
![1:350 USS Enterprise CVN-65 - Markings 1982-2001 (Starfighter Decals 350-53-S) 350-53-S](/products/img/1/9/2/1074192-10105-31-t180.jpg)
USS Enterprise CVN-65 - Markings 1982-2001
Starfighter Decals 1:350
350-53-S (35053) 2017 Новая разработка 13 March, 10:37
March 9, 2024
March 7, 2024
February 27, 2024
![](/profiles/img/95096-810-s.jpg)
I am looking for an aircraft set of decals for my Tamiya Enterprise. Any idea where I can order these. I am in the UK.
![1:350 CVN-65 USS Enterprise - Carrier Air Wing (CVW-11) 1982 (Boatswain Model D350-005) D350-005](/products/img/0/4/4/988044-14745-47-t180.jpg)
CVN-65 USS Enterprise - Carrier Air Wing (CVW-11) 1982
Boatswain Model 1:350
D350-005 27 February, 16:00
![](/profiles/img/95096-810-s.jpg)
добавил новый фотоальбом.
All comments (6) » 17 31 January, 20:44
![](/profiles/img/95096-810-s.jpg)
Thanks Drew Z. They supply PE fan covers for the 6 fans of the Air Con Unit. But there are no actual fans behind those screens lol.
19 February, 16:09
![](/profiles/img/95096-810-s.jpg)
добавил новый проект.
All comments (8) » 6 31 January, 20:38
![](/profiles/img/95096-810-s.jpg)
Update 7. 25.02.24. I have now done the first stage of weathering. I sprayed some Ammo Mig Jet Exhaust Burnt Iron into the engine intake grills. Then a Dark Dirt Florymodels Clay Wash was applied to the whole vehicle. Once this was dry, I went over it with a cotton bud. Rubbing most of the wash back off. This left dirt in the recesses, panel lines and around bolt heads etc. I then did some streaking with a Green Oil Paint. Once this was left overnight to dry, I covered the whole thing in a Matt Coat. I also finished painting the 2 jerry cans, and got these mounted in their rack. The next thing to do is to put some pastels of dust and muck over it. Then try some mud effects around the undersides and wheels. Then a dust coat will be applied. That's all for now. Enjoy.
25 February, 14:30
![](/profiles/img/95096-810-s.jpg)
Update 8. 27.02.24. OK, I am going to call this done for now. Today I finished off the weathering. First I rubbed a Dirt powder from a Tamiya weathering set all over it using some make up eye dabber things. I rubbed this all over the tyres too. This gave it a dusty look. Next I mixed up some Ammo Mug Enamel Liquid Mud with some Ammo Mig Earth Pigment Powder. I then painted this mixture all over the undersides behind the wheels etc. Then before it dried, I dusted on some of the earth powder. Once dry, this gave the effect of dried on mud. First time I have used this stuff, and I am quite impressed with the results. I will add some pics of the stuff I used to the album. I then sprayed a light coat of heavily thinned Ammo Mig Dust paint along the lower portions of the front, sides and rear. I have gone for minimal stowage items at this stage. Just a couple of ammo boxes, a small pack, a ration pack box, and a M60 Machine gun. Then I finished it off with some stretched sprue aerials. Unfortunately, due to the tiny hinge parts. I could not make the hatches to be open-able. There is no interior detail anyway, so it doesn't really matter. I may add other stowage items at a later date. But for now, I am going to say that this mostly enjoyable build, is now complete. Thanks for all the interest and positive feedback.
27 February, 12:52
February 24, 2024
![](/profiles/img/95096-810-s.jpg)
хочет
![1:350 CVN-65 Enterprise PART II (Eduard BIG5352) BIG5352](/products/img/9/8/2/1233982-41450-67-t180.jpg)
Big Ed
CVN-65 Enterprise PART II for Tamiya - contains 53233, 53236, 53237 Eduard 1:350
BIG5352 2019 Модельный набор 24 February, 08:54
![](/profiles/img/95096-810-s.jpg)
хочет
![1:350 CVN-65 Enterprise PART I (Eduard BIG5351) BIG5351](/products/img/0/4/4/1224044-33840-11-t180.jpg)
Big Ed
CVN-65 Enterprise PART I for Tamiya - contains 53223, 53224, 53227 Eduard 1:350
BIG5351 2018 Модельный набор 24 February, 08:54
February 19, 2024
![](/profiles/img/95096-810-s.jpg)
добавил новый проект.
All comments (9) » 9 15 May 2023, 14:27
![](/profiles/img/95096-810-s.jpg)
Update 8, 30.01.24. Things are coming along nicely now. Last night I tried spraying the Light Florymodels Clay Wash over the model. But I have the older wash. It was a bit too thin and was not spraying that well. So, I ended up painting it on liberally with a brush. It looked awful last night when it was still wet. But this morning when it had dried, it didn't look too bad. The good thing about these washes, is that you can remove it with water. So, by dipping a cotton bud in water, I was able to wipe off the wash in areas where I didn't want it. Areas such as the number plates and division markings. I was also able to rub parts of the wash with the dry cotton bud. I think it looks not too bad. I imagine that this vehicle is coming to the end of winter, and parts of the white wash have been lost over the months due to rain etc. I have also now fitted the acetate windscreen glass, and done some dry brushing of the canvas cab cover. Then the whole thing has been sealed in with a matt coat. I have some tools to paint next, then it will be onto the figures. I may try to paint some rust effects on the back bed of it. Not sure yet on that one. Enjoy, and thanks for looking.
30 January, 10:20
![](/profiles/img/95096-810-s.jpg)
Update 9, 19.02.24. OK, the tools have been painted and glued onto the side screens. Next I have done some rust effects on the rear deck and mudguards etc. I put some Mr Surfacer 500 down first. Let it dry for 15 minutes. Then stippled it with an old brush to roughen up the surface. Then I painted over this with Ammo Mig Rust paints of various shades. At first it was a bit too much. Especially on the rear deck. So I toned the rust effects down a bit by adding more of the light Florymodels clay wash. I am calling the main painting and weathering done now. Next I have to build up and paint the 5 figures, plus all the ammo boxes and equipment etc. Enjoy.
19 February, 16:18
![](/profiles/img/95096-810-s.jpg)
добавил новый фотоальбом.
All comments (10) » 19 15 May 2023, 14:35
![](/profiles/img/34728-244-s.jpg)
Quite nice so far. I like the underside. What colour will you chose for the tarpaulin ?
23 January, 16:32
February 12, 2024
![](/profiles/img/95096-810-s.jpg)
добавил новый фотоальбом.
All comments (21) » 27 20 January 2022, 18:49
![](/profiles/img/127872-122-s.jpg)
That is a lot of stuff in the back. Where did you get all the paraphernalia? Nice model.
12 February, 19:34
January 31, 2024
January 28, 2024
January 23, 2024
January 6, 2024
January 2, 2024
December 16, 2023
December 13, 2023
December 8, 2023
November 23, 2023
October 17, 2023
September 29, 2023
September 27, 2023
September 26, 2023
September 24, 2023
September 23, 2023
September 1, 2023
August 18, 2023
July 10, 2023
![](/profiles/img/95096-810-s.jpg)
владеет этим предметом
![1:35 Sd.Kfz. 171 Panther Ausf.G Early/Ausf.G with Air Defence Armor (Meng Model TS-052) TS-052](/products/img/5/7/2/1376572-20159-87-t180.jpg)
German Medium Tank
Sd.Kfz. 171 Panther Ausf.G Early/Ausf.G with Air Defence ArmorMeng Model 1:35
TS-052 (MENG-TS052) 2021 Новые детали 10 July 2023, 19:42
July 2, 2023
![](/profiles/img/95096-810-s.jpg)
владеет этим предметом
![1:35 French commercial signs (Verlinden Productions PC DA35-008) PC DA35-008](/products/img/9/4/0/1013940-41450-16-t180.jpg)
French commercial signs
Verlinden Productions 1:35
PC DA35-008 2 July 2023, 17:53
wnolder.php?lang=ru
2023-07-02 17:49:06
2021-03-27 18:16:06
95096
/ajax/wnolder.php?lang=ru&sd=2023-07-02 17:49:06&md=2021-03-27 18:16:06&filter=&w=95096
todo