Стена
Wall
Zackery Coulombeхочет
2-IN-1 CUSTOMIZING KIT BUILD STOCK OR CUSTOM
'62 FORD Thunderbird INCLUDES NEW PART OPTIONS! AMT 1:25
682/12 (AMT682/12) 2011 Новые детали 2 June, 13:51
May 27, 2024
May 25, 2024
May 17, 2024
May 16, 2024
May 13, 2024
May 10, 2024
May 5, 2024
Zackery Coulombeдобавил новый фотоальбом.
All comments (5) » 13 20 January, 17:32
Zackery CoulombePaint and Clear all from Splash PAints. The color was actually a custom mix. Essentially if you have the OEM paint code, they can whip it up. Not only that biut the metallic in most paints are way out of scale but Splash uses a very very fine flake to replica it in scale
5 May, 00:50
Zackery Coulombeдобавил новый фотоальбом.
15 20 January, 21:20
Jack AaronfeldThat turned out amazing - I've never seen a 262 in a camo scheme like this. Do you reckon you could explain a bit about your painting and weathering process?
4 May, 10:13
Zackery CoulombeHi Jack. Im not 100% sure on the origin oif the scheme as it was on the Montex masks sheet that I purchased for the aircraft. As far as painting techniques go, I used RLNM colors from MRP and it was painted using the Black Basing method with inks. Doogs Models on youtube is a good source for the black basing and LUFT72 has a great tutorial on the ink method here luftraum72.com/layered-ink-patina-technique/
4 May, 22:55
Ben MJust the tip in the paint shop!
Great scheme. The metal panels are very nicely done.
5 May, 00:26
Zackery CoulombeIts a very grueling process combining black basing and inks but the results are far superior to anything else, IDC what any IPMS judge thinks lol.
5 May, 00:48
May 4, 2024
Zackery Coulombeдобавил новый фотоальбом.
4 20 January, 19:12
Zackery CoulombeMaybe I'll re-photograph it someday, this was just a fun shoot to experiment with light than the actual model itself.
3 May, 10:14
Christian WThat would great! Especially because i can't remember having seen this "sportwagon " rear end.
3 May, 17:09
Zackery CoulombeIts available through C1 Models here c1-models.com/resin/..erowagen-c7-corvette
4 May, 22:56
May 3, 2024
Zackery Coulombeдобавил новый фотоальбом.
All comments (7) » 10 20 January, 14:46
Patrick HagelsteinSo sad to hear that the guy's health is taking a pounding… Best wishes to him! His and your work is absolutely outstanding! 👍🏼
2 May, 21:13
May 2, 2024
Zackery Coulombeдобавил новый фотоальбом.
6 20 January, 16:38
Christian WBaiscally the kit turned out pretty good. But it looks like there are issues with the front wheels. On the drivers side it looks like the wheel is more in the wheel house like on the passengers side.
...no my taste: the black parts on the car.
2 May, 05:01
Zackery CoulombeThe camber is identical on both wheels. It has pose-able steering so depending on how the wheel was turned it could looked more tucked on one side than the other. This was a commissioned build for a client as a replica of a car they owned.
2 May, 11:08
Zackery Coulombeдобавил новый фотоальбом.
12 22 April, 01:15
Christian WAgree with the two mates above. This red stripe and mirrors are the topping on the cake 🙂
2 May, 05:06
Zackery Coulombeдобавил новый фотоальбом.
This album no longer exists
0 изображения
1:24 Dodge Super BeeThis album does not contain any images.
1:24
Проект: 1969 Dodge Super Bee
10 20 January, 16:27
May 1, 2024
April 29, 2024
April 28, 2024
Zackery Coulombeдобавил новый фотоальбом.
All comments (7) » 15 28 April, 02:57
Martin OostromI'm building the same kit. And I can tell you did a great job on the carbon on the splitter and rockers. There are some nasty curves there
28 April, 11:29
Zackery Coulombeвладеет этим предметом
MiG-21 Lancer conversion set for Eduard MiG-21 M/MF kit
Icaerodesign 1:48
MIG 21 LANCER 1/48 201x Новая разработка 28 April, 03:10
Zackery Coulombeзавершил
MiG-21 Lancer conversion set for Eduard MiG-21 M/MF kit
Icaerodesign 1:48
MIG 21 LANCER 1/48 201x Новая разработка 28 April, 03:09
April 24, 2024
April 22, 2024
April 20, 2024
March 27, 2024
January 29, 2024
January 27, 2024
January 21, 2024
Zackery Coulombeдобавил новый фотоальбом.
3 21 January, 15:32
Zackery Coulombeзавершил
Honda CBR1000RR-R - FRONT FORK SET (For Tamiya #14138 & 14141)
Tamiya 1:12
12690 2020 Новая разработка 21 January, 00:19
Zackery Coulombeхочет
Cadillac CTS Custom Pickup Body, Interior Tub & Tail Gate For Revell 1:24 85-2051 Cadillac STS-V
Jimmy Flintstone 1:24
NB316 21 January, 00:14
wnolder.php?lang=ru
2024-01-21 00:13:10
2017-08-13 17:17:49
33667
/ajax/wnolder.php?lang=ru&sd=2024-01-21 00:13:10&md=2017-08-13 17:17:49&filter=&w=33667
todo