G6 Rhino
SANDF Self-Propelled Howitzer
Takom | Нет. 2052 | 1:35
Факты
- Фирма:
- Takom
- Заголовок:
- G6 Rhino SANDF Self-Propelled Howitzer
- Число:
- 2052
- Масштаб:
- 1:35
- Тип:
- Полный набор
- Вышел:
- 2016 Новая разработка
- Штрих-код:
- 4897051420675 (EAN)
- Тема:
- Denel G6 Rhino » Самоходная артиллерийская установка (Транспортные средства)
Обозначения
Denel G6 Rhino
G6 Rhino
SANDF
- RKZ 414M
Yellow grey - RKZ 414M
Three Tone Color schema
Содержимое коробки
Пластиковый литник, Фототравление, Декаль (водная), Винил
Размеры:
460x290x80 mm
(18.1x11.4x3.1 inch)
Вес:
850 g (1.87 lbs)
Боксарт разработан Jason Wong
Хронология продукта
Takom
2016
Инструкции
Скачать 12622Kb (.pdf)
Магазин
Интернет-магазины
USD 47.99
В наличии »USD 55.59
В наличии »USD 56.16
В наличии »USD 71.96
В наличии »USD 62.49
Имеется в наличии »USD 66.79
Имеется в наличии »Показать все предложения » (15 в целом)
Частная торговля и обмен
Альтернативные SKU для Takom 2052:
TAK-2052 | TAK 2052 | 4897051420675 | TAK02052 | TAK2052 | TAKOM2052
Заметка: Цены и наличие являются ориентировочными. Также проверьте, действительно ли продукт соответствует!
Сопутствующие товары
G6 Rhino holographic film (+mask & tinting film) (simulate optical instrument lenses)
SX-Art 1:35
36032 2022 Новая разработка Все сопутствующие товары » (6 в целом)
Oбзор содержимого коробки
Внешние обзоры
Реклама
Обзор Ostrich Longneck
Обзор a-model.ru
Все отзывы » (11 в целом)
Журналы
Все журналы » (3 в целом)
Проекты
Галерея
Все статьи » (4 в целом)
Комментарии
Ron Garcia
I really like the way this kit looked so I picked it up when it came out. Definitely not for a beginner, though. Step 1 with the "Don't Glue This" symbols everywhere made this kit a tough start. Lots of dry fitting helped me sort what to do. When I had to do basically the same thing in Step 6, it was much easier.
The rest of the kit had some tricky spots but nothing too difficult with a bit of patience.
There is some PE but thankfully no tedious bending or microscopic parts to attach.
If you paint the windows with a clear green, which I suspect most modelers will do, there isn't much to see of the "cockpit". The top hatch door, part B23, fits snugly above the cockpit so if you do decide to detail the interior, you don't have to glue that piece on and can remove it as desired.
I wish there were some color callouts for some parts. The two part D15s are supposed to be painted red and white. While they are shown that way on the painting instructions, it is small and easily missed. I didn't see it so mine are now yellow, green and brown. The two fire extinguishers on the back are also not identified with colors and the paint chart doesn't even show them installed. I left mine off as almost all the photo references I saw on the internet had them off as well (and part D15 which is another reason I missed it!).
Not a weekend build, for sure. However, when finished you will have a nice "hot rod" looking artillery vehicle for display. I thought the 155 mm SpGH Dana I completed just prior to this kit was big. The Rhino is even bigger. Anyway, because of its unusual appearance, I highly recommend this kit.
I really like the way this kit looked so I picked it up when it came out. Definitely not for a beginner, though. Step 1 with the "Don't Glue This" symbols everywhere made this kit a tough start. Lots of dry fitting helped me sort what to do. When I had to do basically the same thing in Step 6, it was much easier.
The rest of the kit had some tricky spots but nothing too difficult with a bit of patience.
There is some PE but thankfully no tedious bending or microscopic parts to attach.
If you paint the windows with a clear green, which I suspect most modelers will do, there isn't much to see of the "cockpit". The top hatch door, part B23, fits snugly above the cockpit so if you do decide to detail the interior, you don't have to glue that piece on and can remove it as desired.
I wish there were some color callouts for some parts. The two part D15s are supposed to be painted red and white. While they are shown that way on the painting instructions, it is small and easily missed. I didn't see it so mine are now yellow, green and brown. The two fire extinguishers on the back are also not identified with colors and the paint chart doesn't even show them installed. I left mine off as almost all the photo references I saw on the internet had them off as well (and part D15 which is another reason I missed it!).
Not a weekend build, for sure. However, when finished you will have a nice "hot rod" looking artillery vehicle for display. I thought the 155 mm SpGH Dana I completed just prior to this kit was big. The Rhino is even bigger. Anyway, because of its unusual appearance, I highly recommend this kit.
1 3 August 2022, 20:21