Albums (110)

Dark grey with a little black, a small brush, and lots of care...and the lines are added.

The canopy is very cloudy, but nevertheless it was good practice to try to paint the framing.

A tank first used in 1916, but this one has late war markings (only because I like the red and white stripes). After mar...

Milan munition's box painted up, with details picked out. Rifles also now painted.

The pylon base is no longer square-edged, as I hope to make it look like old concrete

Tiny at 1:144, so small brushes only!

The yellow almost completely disappeared whilst the decals were still not loosened from the backing paper. Grrr!

I had huge problems with the canopies, and some struts are the worse for wear. However, having tried originally to match...

Four of the six figures. Matching the rifles to the posed arms of tha last two, is proving difficult...

Anti-aircraft cannon completed, with the empty cases ejector safety cage added.

I've not painted the front of the engine cowl in the copper colour, as I don't have that paint, yet...

Clear coat over all surfaces, and a very dilute, mud-brown, filter over each side, to tone down the decals.

Having now seen several really nice looking builds recently, I realised that 'pristine' is too bland.

Lead in the nose, paint on the clear plastic (tip: use proper primer....)

Giving a helping hand. (Sorry about your basket, I'll mend it later).

Small fragile parts added, green pattern refreshed, and some rust stains added.

Unfortunately the original build album has been deleted, so here are some new ones of the completed results.

Definitely coming together.

Decals applied, sealed and some light weathering to the wheels, etc.

A little bit of rust on the exhaust...

Undercarriage braced too, plus machine gun re-painted. Yes, I should try to properly fit the gizmo for the control cable...

I hereby declare it finished.

Brush painted enamels.

A light clear coat has brought out the colours and got rid of the 'dry' appearance.

Having messed up the decal, I need to try to paint the red lines.

The milk churns didn't have any handles, so I'm adding some from copper wire. The sides against the churn were filed a l...

So, what I'd like to do is to link the hydraulic piston to the long push/pull bar. Here goes....

I chickened out of going the full Pink Panther, so hoping that the slight warmth added to the sandy colour is acceptable...

Two from this set, and four from another.

Almost complete....

Yeh, you and whose army?

The bathers are nearly done, but one shoulder joint needed to have some filler late in the day.

An overall light grey filter applied, to reduce the contrast and make the yellow look less plastic. Also added a dark pa...

They're coming along.....

All teams bringing their fire-power to bear.

Years after buying the kit, I've now got around to making a small base for it (and others) to pose on ;)

And there we are, finished, and posed in a small patch of rough ground.

Accidental lighting pleasing me lots :)

Well, the undercarriage is added and she's definitely not a tail-sitter.

Shine toned down with enamel Matt coat.

Unfortunately I messed up the decals for the depth numbering.... ☹️

All decals on, undercarriage installed, and kettenkrad hitched up.

Replacement Lewis gun is a tiny PE kit in itself. Superb quality MG.

Getting the balance of paint and thinner was key... that, and modifying the paints so the tone and contrast look right, ...

Final pieces added, so now she is 'finished'.

Lots of hatches that will allow views inside....

Work in progress...

The hemispherical covers were very thick, so have been thinned down lots.

An experiment in trying to create a 'soft-edged' camouflage using brush-applied enamel paint and thinners... Probably wo...

A wee touch up on the tyres needed. Not sure there's much I do on the rest....

The intention was to match the unusual box-art colours. Tried 'wet on wet' to softly blend one colour into the next.

Managed to break off the pitot tube and one machine gun, so some running repairs still to be done.

A very dusty example (the only surviving one?) in the Museum of Technology, Prague.

First attempts at making a diorama.... gates to be added next.