SH2-F Seasprite Construction

1
October 26, 2021
The very poor Interior with decals
2
October 26, 2021
home made seabelts- bigger than reality but anyway...
3
October 26, 2021
4
October 26, 2021
closed the main fuselage of this bird!
5
October 26, 2021
the nose fits ok
6
October 26, 2021
photo of the pack
7
October 27, 2021
the rotor housing had the central hole in the wrong place 🙁 🙁 had to fill the old one with CA and powder, then drill a new one!
8
October 27, 2021
job done
9
October 27, 2021
and it fits!! 🙂
10
October 29, 2021
more bits glued in place
11
October 29, 2021
the horrible decal sheet! The kit is very old and the decal sheet got a yellowish colour- lets see how is gonna be aplying the decal (specially the white ones!)
12
November 2, 2021
Due to the not proper fitting of the dashboard, I had to come up with a way to fit it to the kit, and for that I had to cut the original foot pedals (I dont know if it is the right name for it) e make new ones!
13
November 2, 2021
All glued in place! The pieces to the right and left are scratchbuild stuff to glue behind the panel! The kit was totally bare, so I used photos and the instrutions of the Kitty Hawk kit to come up with some simple pieces, made with Evergreen and some small styrene pieces
14
November 2, 2021
All fitted in place- looks a lot better!!
15
November 2, 2021
16
November 2, 2021
Dashboard panel fitted and glued in place!! Gonna have to make a small cover to the cockpit, a strip of styrenne will suffice!
17
November 16, 2021
created the 3 headlights- which are missing in the kit!
18
November 16, 2021
made some wires from sprue, but next time I'll use lead wire, easier to work and a lot more maleable!
19
November 16, 2021
created the forward "steps", the one molded in the kit are very poor"
20
November 16, 2021
21
November 16, 2021
22
November 16, 2021
scribed the front nose panel line- the "nose" opens in half!
23
November 16, 2021
masked the front canopy
24
November 18, 2021
all the windows masked! getting closer to start the paintjob!
25
November 24, 2021
26
November 24, 2021
finally the assembly of the rest of the cabin!
27
November 24, 2021
Fitting of the front canopy is not the best, unfortunately! Is either that or the low skill of the scale modeller! 😛 There's a gap that has to be filled with putty or other method! Oh and the decals have to be placed before placing the canopy, ou in alternative, cutted after! I prefered to paint the black colour- not gonna use the decal!
28
November 29, 2021
29
November 29, 2021
The tail rotor baldes were painted, I didn't use the decals provided. Whenever I can, i prefer to paint!
30
December 9, 2021
The original pieces of the landing gear, besides looking weak, also lacks a lot of detail.
Gotta add some pieces of styrene to make it look better and (at least in theory) stronger!!
31
December 9, 2021
one is done, starting the second!
32
December 9, 2021
Some small details in the port side before starting to paint! They add a lot more to the kit!
33
December 9, 2021
small details in the starboard side before starting to paint!
34
December 9, 2021
half way work on the wheels- just missing the central hub and hooks- which have to be scratchbuild from lead wire! 🙂

Comments

13 26 October 2021, 14:23

Carl Stark
Great work. I'm watching this for my own future build. I have the Cobra upgrades, so we'll see😇

28 November 2021, 17:41

Tino Delgado
Thank you Carl for the kind words!
This is one tough kit! It's old and it shows! The Cobra upgrades will definitely help you achieve a beter looking model than mine!

29 November 2021, 12:49

Florian H.
Nice so far, but please turn around the sticks 🙂

8 January 2022, 19:47

Tino Delgado
Hello Florian, it shows how really a noob I am in scale modelling! Unfortunately the cabin is almost closed and it will dificult to correct the mistake I made, but I'll make my best effort to correct it.
Thank you very much for pointing this out!

12 January 2022, 12:15

Florian H.
Hi Tino, ah sad, but no worries, the next time it will be better. This is the first thing i notice on helicopters. In real life i tried it once at a BO 105 and an EC135, you are not able to crontrol the helicopter in case of the stick touches the seat (at the BO). With the EC you have a bit more space, so theoretical it is possible xD

12 January 2022, 18:06

Album info

Revell 1/48 kit (Matchbox rebox).

Looks ok, but working on it has not been easy peasy!
Cons: the upper rotor housing, lots of mold lines to sand, the central instrumental panel doesn't fit because the fuselage walls need sanding on the inside part, the decal sheet has turned yellow with time...

well I'll end it but is not an easy kit for a beginner(which is what I am! 😛)

SH2-F Seasprite

34 images

1:48

In progress

Kaman SH-2F Seasprite

US Navy (1794-now)
HSL-35 162580/TG/42
1988 - NAS Fallon, NV
FS16081

All albums

View all albums »