USS Constellation

1
February 26, 2023
Box Art
2
February 26, 2023
The ship is massive, I am using the box to see how large the water diorama bases is reasonable.
3
February 26, 2023
Try placing it with an angle, I prefer the parallel version.
4
February 26, 2023
This time, I came up with a new way of making the diorama base. I decided to make a 1.2m X 0.4m one in the end. I will probably throw out my old TV to clear up enough room for this diorama.
5
February 26, 2023
Nailing the wooden bars to the side of the wooden base.
6
February 26, 2023
I was trying to size the high density plastic foam here
7
February 26, 2023
basic sizing of the diorama foam
8
February 26, 2023
I bought a heating wire this time to cut the foam as using a knife is kind too dangerous for this task.
9
February 26, 2023
diorama foam after cut
10
February 26, 2023
diorama foam after cut 2
11
February 26, 2023
trying to see how the ship fit into the diorama foam and if the "water" is actually at around the waterline
12
February 26, 2023
Apply clay to the diorama foam.
13
February 26, 2023
diorama after clay is applied
14
February 26, 2023
diorama after clay is applied 2
15
February 26, 2023
diorama after clay is applied 3
16
February 26, 2023
while waiting for the clay to dry out, I am starting to do some "sparky" works for the wooden base. Here is the photo shows the side of the wooden base where the control switch and USB charging port is installed.
17
February 26, 2023
This photo shows the wiring connection in the base. I add a lithium battery and a charing chip for power storage,
18
February 26, 2023
My cutting knife is dead during the construction here, thank you for serving me for all these years.
19
February 26, 2023
decoration wood bars and name tag
20
February 26, 2023
Name tag after painted
21
February 26, 2023
This is how it looks after the name tag and decoration wood bars are installed
22
February 26, 2023
View for the switch and c
23
February 26, 2023
Put the ship on the dia
24
February 26, 2023
Not too clouded, I think the diorama's size is ok
25
March 11, 2023
The side of the hull has some details but they are for 2000+ CV63 not CV64. So most of these details need be removed and remaked.
26
March 11, 2023
Adding welding line by carving. The carving tape from DSPIAE is quite useful as it has scales in mm which made locating much easier.
27
March 11, 2023
After welding lines are carved which has referenced kitty hawk photos. The next step is adding the hooks around the hull.
I am using 0.2mm coppor wires for illustrating the hooks.
28
March 11, 2023
More photos for adding hooks
29
March 11, 2023
More photos for adding hooks
30
March 11, 2023
After the hooks are installed, the pipes around the hulls are added. I am using 0.5mm ABS wires for making it.
31
March 11, 2023
Other side of the hull
32
March 11, 2023
The right forward platform from the kit is actually not in quite correct sharp for Connie. So I redo the platform extension when referencing Connie's photo
33
March 11, 2023
Adding coppor wires for making the engineering hooks beneth the plat
34
March 11, 2023
nearly done
35
March 11, 2023
I release I made mistake on the shape of the platform and had to reshape it further for correction. Now this should be accurate enough.
36
July 18, 2023
37
July 18, 2023
38
July 18, 2023
39
July 18, 2023
40
July 18, 2023
41
July 18, 2023
42
July 18, 2023
43
July 18, 2023
44
July 18, 2023
45
July 18, 2023
46
July 18, 2023
47
July 18, 2023
48
July 18, 2023
49
July 18, 2023
50
July 18, 2023
51
July 18, 2023
52
July 18, 2023
53
July 18, 2023
54
July 18, 2023
55
July 18, 2023
56
July 18, 2023
57
July 18, 2023
58
July 18, 2023
59
July 18, 2023
60
July 18, 2023
61
July 18, 2023
62
July 18, 2023
63
July 18, 2023
64
July 18, 2023
65
July 18, 2023
66
July 18, 2023
67
July 18, 2023
68
July 18, 2023
69
July 18, 2023
70
July 18, 2023
71
July 18, 2023
72
July 18, 2023
73
July 18, 2023
74
July 18, 2023
75
July 18, 2023
76
July 18, 2023
77
July 18, 2023
78
July 18, 2023
79
July 18, 2023
80
July 18, 2023
81
July 18, 2023
82
July 18, 2023
83
July 18, 2023
84
July 18, 2023
85
July 18, 2023
86
July 18, 2023
87
July 18, 2023
88
July 18, 2023
89
July 18, 2023
90
July 18, 2023
91
July 18, 2023
92
July 18, 2023
93
July 18, 2023
94
July 18, 2023
95
July 18, 2023
96
July 18, 2023
97
July 18, 2023
98
July 18, 2023
99
July 18, 2023
100
July 18, 2023
101
July 18, 2023
102
July 18, 2023
103
July 18, 2023
104
July 18, 2023
105
July 18, 2023
106
July 18, 2023
107
July 18, 2023
108
July 18, 2023
109
July 18, 2023
110
July 18, 2023
111
July 18, 2023
112
July 18, 2023
113
July 18, 2023
114
July 18, 2023
115
July 18, 2023
116
July 18, 2023
117
July 18, 2023
118
July 18, 2023
119
July 18, 2023
120
July 18, 2023
121
July 18, 2023
122
July 18, 2023
123
July 18, 2023
124
July 18, 2023
125
July 18, 2023
126
July 18, 2023
127
July 18, 2023
128
July 18, 2023
129
July 18, 2023
130
July 18, 2023
131
July 18, 2023
132
July 18, 2023
133
July 18, 2023
134
July 18, 2023
135
July 18, 2023
136
July 18, 2023
137
July 18, 2023
138
July 18, 2023
139
July 18, 2023
140
July 18, 2023
141
July 18, 2023
142
July 18, 2023
143
July 18, 2023
144
July 18, 2023
145
September 14, 2023
146
September 14, 2023
147
September 14, 2023
148
September 14, 2023
149
September 14, 2023
150
September 14, 2023
151
September 14, 2023
152
September 14, 2023
153
September 14, 2023
154
September 14, 2023
155
September 14, 2023
156
September 14, 2023
157
September 14, 2023
158
October 21, 2023
159
October 21, 2023
the shape of the platform is bot correct have to build one from abs sheet
160
October 21, 2023
161
October 21, 2023
install pryholes
162
October 21, 2023
more of these
163
October 21, 2023
takes forever
164
October 28, 2023
165
October 28, 2023
166
October 28, 2023
167
October 28, 2023
168
October 28, 2023
169
October 28, 2023
170
October 28, 2023
171
October 28, 2023
I have to pack it as I am about to move to different city for a new job. Not sure when will I get chance to continou build this

Comments

37 26 February 2023, 10:48

James C
Following 👀 👍

26 February 2023, 17:48

Hang Li
The paint job reveals way too many defects, to a piont of unfixable. This fact really demotivate me for this project. Might just leave it on hold for a while to see if I can regain my passion. carrier in 350 scale requires way to much time than a could spare.

14 September 2023, 00:55

Marek Valko
So underrated project here. AMAZING job!

14 September 2023, 06:28

JayJackson711
Man, we would love to see the finished version. I hope you are able to keep building this.

13 November 2023, 06:06

JayJackson711
Also, I have a question. How did you do that box-shaped preshading on picture 152 and 153? I'd love to do that whenever I get a ship model.

13 November 2023, 06:09

Hang Li
Thanks everyone! The shading is painted with mask tape and a fine airbrush (I am using badger RV1 for this). each line is painted seperatly and paint vertial lines after the horizantal ones are done.Takes a lot of patiance. I learnt this technique from Youtube. I would recommand you to check out a channel called "studio blue ocean" and some of his video demostrated this method (the recent USS Zumwalt video should contain it).

17 November 2023, 13:59

Thomas Bischoff
insane details! Your hangar deck just blows me away

17 November 2023, 16:52

JayJackson711
thank you very much for sharing your techniques 🙂

18 November 2023, 02:14

Project info

CV64 USS Constellation

171 images

1:350

In progress

1:350 CV-64 Constellation Detail Up Parts DX (KA Models MS-35048)

All albums

View all albums »