Grumman A-6A Intruder
Trumpeter | Nr. 01640 | 1:72
Fakty
- Marka/Wydawnictwo:
- Trumpeter
- Tytuł:
- Grumman A-6A Intruder
- Numer:
- 01640
- Skala:
- 1:72
- Rodzaj:
- Zestaw
- Wydane:
- 2023 Nowe formy
- kod kreskowy:
- 9580208016405 (EAN)
- Opakowanie:
- Sztywne pudełko (otwierane z góry)
- Temat:
- Grumman A-6 Intruder » Odrzutowce (Samoloty)
Oznaczenia
Grumman A-6 Intruder
Grumman A-6A Intruder
US Navy (1794-now)
- VA-145 Swordsmen NE-507 | 155717
Styczeń 1973 Vietnam War - USS Ranger (CV-61)
FS36440 FS37875 FS14187 - VA-196 Main Battery NK-402 | 154147
1968 Vietnam War - USS Constellation (CV-64)
FS36440 FS37875 FS11136
Zawartość pudełka
Ramka plastikowa, Ramka plastikowa (Clear), Kalkomania wodna
Wymiary:
360x240x80 mm
(14.2x9.4x3.1 inch)
Historia produktu
Trumpeter
Instrukcje
Pobierz 4596Kb (.pdf)
Giełda
Sklepy internetowe
USD 28.36
Na stanie »USD 36.99
Na stanie »USD 38.21
Na stanie »€ 25.99
USD 29.18Na stanie »€ 29.50
USD 33.12Na stanie »zł 98.84
USD 25.91Na stanie »Pokaż wszystkie oferty » (13 razem)
Alternatywne jednostki SKU dla Trumpeter 01640:
TU01640 | TRU01640 | TRUM01640 | TR01640 | TRU1640 | TRP1640
Uwaga: Ceny i dostępność są tylko wskazówkami. Sprawdź dokładnie, czy produkt rzeczywiście pasuje!
Produkty podobne
Wszystkie powiązane produkty » (58 razem)
Recenzja zawartości
Recenzje zewnętrzne
Reklama
Przejrzeć RW Hobbies
Przejrzeć Mojo Rising Modelling
Czasopisma
Komentarzy
SRW
The forward main landing gear doors and compartment are missing! Some kit of the year!
The forward main landing gear doors and compartment are missing! Some kit of the year!
All comments (8) » 4 12 February, 17:32
Oleg Bogolei
yes, but they made a flat wall between front and rear section, so it is impossible to modify to make it looks more or less real, only cut and make a absolutely new bay
yes, but they made a flat wall between front and rear section, so it is impossible to modify to make it looks more or less real, only cut and make a absolutely new bay
1 April, 11:11
Casey Beckett
Great new kit, a few wee issues - scales out darn near perfectly.
Seen several reviews complaining about fin cap shape - it is darn near spot-on. I worked on A-6s for over ten years, know this airframe intimately.
Couple small things I've caught as I contemplate my build -
- Big complaint from many, but not quite correct - some A-6A WERE IN fact retrofitted with MB GRU-7 seats, so this should not be a huge issue - anyone doesn't believe you, get this book - Intruder: The Operational History of Grumman's A-6 by Mark Morgan
- the 'slime lights' on the wing tips and fuselage above and forward of the speed brakes are wrong for an A-6A. A-6A did have a small formation light on the fuselage.
- Pitot tube is far too thick and too long
- 'v' shaped tabs on rear of radome are far too thick, in real life this very thin steel straps
- A-6A had one anti collision beacon on the nose door, not one one each intake belly as the kit has. So; one, not three as the kit has.
- Cockpit got the B/N lower and to the rear of the pilot pretty well.
-Instrument panel as molded would be a great depiction of a KA-6D tanker for starters, as the B/N had very little in front of him.
-Engine face is way too far forward - real aircraft the fan face was almost below the main wing root leading edge.
- Canopy is crystal clear and I think nailed the slight 'bulge' of each side of the canopy.
- several small vents are wrong for the -A, but correct for an -E or Tram model.
I won't complain about ordnance, they do all look pretty sketchy! (Fuel tanks look ok)
Overall, I am very happy to have a new mold, and will be getting the Tram version too
Great new kit, a few wee issues - scales out darn near perfectly.
Seen several reviews complaining about fin cap shape - it is darn near spot-on. I worked on A-6s for over ten years, know this airframe intimately.
Couple small things I've caught as I contemplate my build -
- Big complaint from many, but not quite correct - some A-6A WERE IN fact retrofitted with MB GRU-7 seats, so this should not be a huge issue - anyone doesn't believe you, get this book - Intruder: The Operational History of Grumman's A-6 by Mark Morgan
- the 'slime lights' on the wing tips and fuselage above and forward of the speed brakes are wrong for an A-6A. A-6A did have a small formation light on the fuselage.
- Pitot tube is far too thick and too long
- 'v' shaped tabs on rear of radome are far too thick, in real life this very thin steel straps
- A-6A had one anti collision beacon on the nose door, not one one each intake belly as the kit has. So; one, not three as the kit has.
- Cockpit got the B/N lower and to the rear of the pilot pretty well.
-Instrument panel as molded would be a great depiction of a KA-6D tanker for starters, as the B/N had very little in front of him.
-Engine face is way too far forward - real aircraft the fan face was almost below the main wing root leading edge.
- Canopy is crystal clear and I think nailed the slight 'bulge' of each side of the canopy.
- several small vents are wrong for the -A, but correct for an -E or Tram model.
I won't complain about ordnance, they do all look pretty sketchy! (Fuel tanks look ok)
Overall, I am very happy to have a new mold, and will be getting the Tram version too
3 17 March, 02:28
Materiał referencyjny
A-6 Intruder In U. S. Marine Corps Service and Navy Test & Evaluation Squ...
Colors & Markings Series Nr. 7
Rock Roszak, Mike Heideman
2023 Wszystkie książki » (26 razem) Wszystkie walkaroundy » (15 razem)