Vegg
Wall
August 28, 2024
Juepak7/10. 1. Border plastic is very soft and caution is needed in sanding as its very easy remove too much. 2. There is a habit of having smaller connecting parts without any male/female connectors marking correct alignment challenging 3. The instructions have multiple errors, both in part numbers and placement. 4. As usual there are extra parts (seems they will issue an internal kit at some point) but these extra parts make the incorrect numbering etc even more challenging. 4. First time I've struck this - there are parts that obviously are to be fitted and the setting places are clealry marked on the kit - but not included in the instructions. Don't Border have someone make the kit before issuing or do they do this on purpose as a challenge? 5. Very nice metal gun barrel. Nice little kit, and Border is trying but I place this kit between its Crusader and Initial Tiger.
8 18 November 2022, 16:52
Trez MackenzieTypical Border - great potential but ruined by a lazy 'must get this kit out there' attitude
28 August, 12:30
August 1, 2024
July 28, 2024
Juepakønsker
Initial Panther Ausf. D Drive Sprockets for Meng
Tankbrusher Scale Modeling 1:35
352312003 2023 New tool Digital: 3D datafil28 July, 13:23
July 27, 2024
Juepakønsker
Sd.Kfz.171 Panther G w/Night Sights and Air Defense Armor & Steel Wheel
Rye Field Model (RFM) 1:35
RM-5112 (RFM5112) 2024 Nye deler 27 July, 17:21
July 8, 2024
June 13, 2024
May 15, 2024
May 9, 2024
Juepak5/10. A real disappointment - especially as it comes after finishing a Dragon Mid-Tiger and a RFM Panther F. Gaps all over the place. The gun carriage is fixed when it could very easily have been made moveable. The usual Border issue of one part being glued to another without any guide pins. Very poor instructions - multiple missing part numbers (the instructions show the part and the space for the number but it hasn't been filled in). Minimum detail on the IV chassis - for example the driver's viser is filled in - no transparent block, in fact no transparent parts. The barrel muzzel flash has to have the holes drilled (I used a add-on metal barrel instead). Usual very soft Border plastic - which ironically is a benefit given the multitude of injector marks that need to be filled. It comes across as a circa 1970s kit. Reminds me of the Border Crusader.
9 May, 16:24
April 25, 2024
Juepakønsker
Sd.Kfz.164 Hornisse (Nashorn, Early Variant) W/ Magic Track, Aluminum Barrel and four figures
Dragon 1:35
6414MT (6414) 2023 Nye deler 25 April, 17:11
April 24, 2024
April 4, 2024
February 21, 2024
MiniArt 1:35
February 18, 2024
February 8, 2024
February 7, 2024
January 27, 2024
January 8, 2024
JuepakGenerally a nice kit 7/10. Issues: 1. Rubber band tracks - I swapped in link and link tracks from a Zvezda kit. 2. The rockets have two out of scale rings around the circumference that makes them too big to sit inside the launcher crates (also incorrect as per historical photos) - I swapped the kit's rockets for spares from the excellent Miniart No. 35269 German Rocket Launcher. 3. MAJOR ISSUE: step 22 and 23 instructions for part N20 are incorrect and should be ignored. Step 27 should be used for the placement of N20 - if you use steps 22 and 23 its too late 🙁
1 8 January, 09:21
October 20, 2023
Juepakønsker
Pz.Kpfw. IV Ausf. G w/ workable winterketten trakcs
Rye Field Model (RFM) 1:35
RM-5102 (RM5102) 2023 Nye deler 20 October 2023, 17:48
October 19, 2023
Juepakønsker
Sd.Kfz.166 Stu.Pz.IV 'Brummbar' Early Production (The Battle of Kursk)
Dragon 1:35
6992 2023 Nye deler 19 October 2023, 14:38
September 28, 2023
Juepakønsker
Pz.Kpfw. VI Ausf. E Sd.Kfz. 181
Tiger I Early Production, Wittmann's Command Tiger w/Magic Track Dragon 1:35
6730MT 2022 Nye deler 28 September 2023, 17:15
September 26, 2023
September 24, 2023
wnolder.php?lang=no
2023-09-24 15:42:30
2021-01-28 03:58:24
89511
/ajax/wnolder.php?lang=no&sd=2023-09-24 15:42:30&md=2021-01-28 03:58:24&filter=&w=89511
todo