Vegg
Wall
April 22, 2024
April 18, 2024
April 17, 2024
April 16, 2024
d hadleyla til et nytt fotoalbum
All comments (26) » 11 18 January, 18:57
JvSorry Bob I had a look at the Baldwin camaro kit
Just looked at a few reviews
I was thinking if thay made a kit pree chist thay probably wouldn't change much
In the next few thousand of years
The early kits were about 2000
The kit does have rockers showing in the heads
And yes you can see what resembles pistons
But all at the same level of the bore
And the 2 pistons on each end of the block on both sides
Have lining up blocks across them
The latest kit in that family still has those details
In the case of the block D Hadley is uesing
The pistons are at different levels and there is nothing over the pistons
Further more the pistons are machined for the valve clearance
25 February, 14:57
April 14, 2024
April 11, 2024
April 9, 2024
d hadleyla til et nytt fotoalbum
All comments (7) » 10 21 November 2023, 19:20
Christian WIt is hard to tell, why the surface looks like it looks. My guess is, that it was a little to much color for one pass or it was to thick (maybe caused of a colder surrounding?). I think with 2-3 layers of clear coat and at least wet sanding between #2 and #3 it could smooth the surface. But it depends on the clear coat what you use. I made the experience, that you need more layers out of a rattle can instead of using 2K (mixed clear coat and harderner). 2K is harder and takes more punishment while wetsanding. With normal clear varnish from a rattle can, the risk of sanding through the clear varnish is higher. That's why I work with several layers.
24 November 2023, 09:37
April 5, 2024
March 29, 2024
March 9, 2024
March 1, 2024
February 25, 2024
February 13, 2024
February 6, 2024
February 5, 2024
February 2, 2024
January 24, 2024
January 18, 2024
January 15, 2024
January 9, 2024
January 5, 2024
December 29, 2023
December 28, 2023
December 27, 2023
December 26, 2023
December 22, 2023
December 21, 2023
d hadleyvil ha
LBWK Silhouette Aventador GT EVO Combo Version
KitBox & PZY Model 1:24
KB08-06 (PZY-005) 2023 New tool 21 December 2023, 18:12
December 20, 2023
December 19, 2023
December 15, 2023
November 30, 2023
d hadleyeier nå
Coca-Cola
1972 Chevy Fleetside w/Coca-Cola Vending Machine & Crates AMT 1:25
AMT1231M/12 2021 Nye dekaler 30 November 2023, 12:59
November 28, 2023
November 23, 2023
d hadleyla til et nytt fotoalbum
4 9 February 2020, 23:40
Christian WIt would be very interessting to see, how you could build this kit today. I used to do that - rebuild my childhood mistakes 😉 Today I know, that there were a lot of kits which I've built in my childhood, where I see now, that I was to young to handle the issues. This C4 by MPC/AMT/ERTL is one candidate. The hood and wheels I'm still struggling with. They need some more attention.
22 November 2023, 13:28
d hadleyAgreed! I never did get the hood to settle down right. I believe I have one of the same generation in my stash that I will get to have a second go at it.
22 November 2023, 20:19
Christian WI've build a hand full of the C4. It is always a struggle to get it fit properly at the front end. On one I cut off the pins for the hood hinge. The hood doesn't operate anymore but it closes well and the hight of the front end is deep enough. On the ZR1 I sanded a lot off away ot the air cleaner box. On one kit, I thinned out the inner hood around the area of some engine parts. I tried a lot and every kit was another solution. Mostly the problem is around the hood hinge. And then there is the problem: if you want to lower the chassis (practically the body gets lowered over the chassis), the hood gets hight at the hinge. If you fix the hood, then the distance of the wheel to the wheelhouse is to much.
23 November 2023, 05:38
d hadleyla til et nytt fotoalbum
5 12 February 2020, 22:27
Christian WAnd it still exists! My first modelkit car is the 1982 Camaro by Revell. It also sits in my shelf. So cool to be reminded to the roots of this hobby.
22 November 2023, 13:39
d hadleyThanks! I think its important to remember how far we've come. Its all too easy to get down on ourselves for imperfections.
22 November 2023, 20:13
November 22, 2023
d hadleyla til et nytt fotoalbum
3 9 February 2020, 02:02
Christian WIt's so cool to see your "blast of the past". A lot of us didn't keep them I think.
22 November 2023, 13:26
April 26, 2024
November 22, 2023
d hadleyla til et nytt fotoalbum
All comments (7) » 8 12 February 2020, 21:52
Christian Wcopy that - remembering the old days. I enjoy your old builds definitelly. That reminds me (again), to update a album with "The blast of the past"
22 November 2023, 13:35
November 20, 2023
November 19, 2023
November 17, 2023
November 8, 2023
November 5, 2023
October 27, 2023
d hadleyvil ha
Old Mini Cooper 1.3i Stella Bridger Model "The Italian Job" Movie
Fujimi 1:24
18577 (3) 2005 Nye dekaler 27 October 2023, 20:54
wnolder.php?lang=no
2023-10-27 20:34:57
2018-03-15 15:01:27
38592
/ajax/wnolder.php?lang=no&sd=2023-10-27 20:34:57&md=2018-03-15 15:01:27&filter=&w=38592
todo