Soviet Heavy Tank SMK
Takom | Nr. 2112 | 1:35
Fakta
- Merke:
- Takom
- Tittel:
- Soviet Heavy Tank SMK
- Nummer:
- 2112
- Skala:
- 1:35
- Type:
- Byggesett
- Utgitt:
- 2018 New tool
- Strekkode:
- 4897051421276 (EAN)
- Emballasje:
- Stiv boks (Toppåpning)
- Tema:
- SMK » Panservogn (Kjøretøy)
Eskens innhold
Støpebrett, Fotoets, Dekalark (vannoverførings)
Dimensjoner:
380x250x85 mm
(15x9.8x3.3 inch)
Vekt:
680 g (1.5 lbs)
Boxart designet av Jason Wong
Produktets tidslinje
Takom
2018
Bruksanvisning
Last ned 3680Kb (.pdf)
Markedsplass
Nettbutikker
USD 44.99
På lager »USD 47.69
På lager »USD 47.99
På lager »USD 52.27
På lager »USD 62.96
På lager »USD 52.08
Tilgjengelig »Vis alle tilbud » (15 totalt)
Alternative SKU-er for Takom 2112:
TAK-2112 | TAK2112 | TAK02112 | TAKOM2112 | TAKO2112 | TAO2112
Merk: Priser og tilgjengelighet er kun indikasjoner. Sjekk også om produktet faktisk stemmer overens!
Relaterte produkter
Main Armament for Soviet Heavy Tank SMK 1x76,2mm L-11, 1x45mm M1932 Takom
Aber 1:35
35L-275 2019 New tool In-box anmeldelser
Eksterne anmeldelser
Annonse
Alle anmeldelser » (10 totalt)
Magasiner
Kommentarer
Ron Garcia
Given the size of the SMK, this is a very quick and easy kit to build. I thought the individual track links would be a pain but they practically fell together. All the running gear fits tightly without cement so you can easily drape the the tracks around them to add a slight sag. After it sets, you can then pop off the drive sprocket and idler wheel for easy painting of the tracks.
The only tricky part for me was the first few steps of the main turret construction. I would recommend cementing the two halves together and then attach the top at the same time. The instructions have you install the rear MG while cementing the two halves together. I found this fiddly. Plus, by adding the top at the same time as the two halves, it gives you wiggle room to adjust the fit of the assembly.
Though it doesn't say it, if you cut the brass wire in half, it will be the right length for both sides of the towing cable. Also, parts E7 and E8 require you to drape them under two A27 sections so don't assemble the cables ahead of time or you will have trouble.
Overall, a nice, unique, big early war tank. Because of the ease of construction, I would highly recommend it!
Given the size of the SMK, this is a very quick and easy kit to build. I thought the individual track links would be a pain but they practically fell together. All the running gear fits tightly without cement so you can easily drape the the tracks around them to add a slight sag. After it sets, you can then pop off the drive sprocket and idler wheel for easy painting of the tracks.
The only tricky part for me was the first few steps of the main turret construction. I would recommend cementing the two halves together and then attach the top at the same time. The instructions have you install the rear MG while cementing the two halves together. I found this fiddly. Plus, by adding the top at the same time as the two halves, it gives you wiggle room to adjust the fit of the assembly.
Though it doesn't say it, if you cut the brass wire in half, it will be the right length for both sides of the towing cable. Also, parts E7 and E8 require you to drape them under two A27 sections so don't assemble the cables ahead of time or you will have trouble.
Overall, a nice, unique, big early war tank. Because of the ease of construction, I would highly recommend it!
2 24 June 2022, 20:09