Russian 1S91 SURN Kub Radar
Trumpeter | N° 09571 | 1:35
Statistiques
- Marque:
- Trumpeter
- Titre:
- Russian 1S91 SURN Kub Radar
- Numéro:
- 09571
- Échelle:
- 1:35
- Type:
- Maquette complète
- Sorti:
- 2019 Nouvel outillage
- Code à barre:
- 9580208095714 (EAN)
- Emballage:
- Boîte rigide (ouverture par le haut)
- Sujet:
- 2K12 Kub » Artillerie automotrice (Véhicules)
Contenu de la boîte
Dimensions:
450x290x80 mm
(17.7x11.4x3.1 inch)
Poids:
760 g (1.68 lbs)
Chronologie du produit
Trumpeter
2019
Instructions
Télécharger 16604Kb (.pdf)
Place de marché
Boutiques en ligne
USD 87.82
En stock »USD 113.59
En stock »USD 113.59
En stock »USD 114.35
En stock »USD 121.51
En stock »USD 135.99
En stock »Afficher toutes les offres » (19 au total)
Commerce privé et swap
SKU alternatifs pour Trumpeter 09571:
9580208095714 | TRUM09571 | TRU09571 | TR09571 | TRUMPETER09571 | PKTM09571
Remarque: Les prix et la disponibilité ne sont qu'indicatifs. Vérifiez également si le produit correspond réellement!
Produits connexes
Avis sur le contenu de la boîte
Examens externes
Lien rompu David's Modellbaukeller
Galerie
Tous les articles » (11 au total)
Commentaires
Vesa-Pekka Palmu
The kit is pretty good, but there are ejector pin marks that need to be dealt with, and some of them are in annoying places to clean. The tracks are link-and-length and also have pretty deep ejector pin marks, on each individual link and few on each length piece, would recommend getting the SA-6 Kub tracks as an aftermarket part.
The kit is pretty good, but there are ejector pin marks that need to be dealt with, and some of them are in annoying places to clean. The tracks are link-and-length and also have pretty deep ejector pin marks, on each individual link and few on each length piece, would recommend getting the SA-6 Kub tracks as an aftermarket part.
1 6 November 2021, 09:56
Vesa-Pekka Palmu
And now that I remember I also ran into some fit issues with the hatches on the hull and had to do some slight modifications to one hatch and PE hinges to get them to fit.
And now that I remember I also ran into some fit issues with the hatches on the hull and had to do some slight modifications to one hatch and PE hinges to get them to fit.
6 November 2021, 10:00
Vesa-Pekka Palmu
So check the fit of all hatches before gluing any of them in place.
So check the fit of all hatches before gluing any of them in place.
6 November 2021, 10:00
Treehugger
Pin ejector marks, may be easily fixed, by the following method, which is my favourite: Use Vallejo putty in a hole, then top it like soft ice cream (so that it sticks upwards cancelling any shrinking of the putty as it dries). Wait some time, then use a blade to cut the top flush with the surface, or close enough, then let it dry some more, then maybe sand the surface clean (then the putty should have gone hard after some hours, or a day).
Pin ejector marks, may be easily fixed, by the following method, which is my favourite: Use Vallejo putty in a hole, then top it like soft ice cream (so that it sticks upwards cancelling any shrinking of the putty as it dries). Wait some time, then use a blade to cut the top flush with the surface, or close enough, then let it dry some more, then maybe sand the surface clean (then the putty should have gone hard after some hours, or a day).
6 November 2021, 11:12
Matériel de référence
SA-6 Gainful Launcher and Radar Vehicles
Present Vehicle Line N° G 046
Jan Horak, Frantisek Koran
2016 SA-6 Gainful in detail Soviet Anti-aircraft Mobile Rocket System
Present Vehicle Line N° G 015
František Korán, Tomáš Bouchal, Jan Horák
Tous les photoscopes » (6 au total)