Muro
Wall
hiveloc
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
15 imágenes
Trumpeter/SPD T-62 Mod 19721:35
Initial base coat on- light at the end of the tunnel!
Proyecto: T-62 Mod 1972 August 2008
All comments (5) » 18 15 March, 18:24
hiveloc
The turret slat mounting is going to the top of my NOT FUN list! I had a sheet of paper full of measurements and helpful tips from @André Silva, but I still ended up spending too much time testing and fitting everything in place. An unfortunate tip-over during construction had me re-attaching some of the parts- sigh.
The turret slat mounting is going to the top of my NOT FUN list! I had a sheet of paper full of measurements and helpful tips from @André Silva, but I still ended up spending too much time testing and fitting everything in place. An unfortunate tip-over during construction had me re-attaching some of the parts- sigh.
25 April, 17:27
May 16, 2024
hiveloc
tiene este artículo
tiene este artículo
Set of
Aerials for Russian Tanks (x3 pcs) like T-34, T-55, T-62, T-72 and other AFV Aber 1:35
R33 2012 Nuevos moldes 16 May, 17:03
April 13, 2024
hiveloc
tiene este artículo
tiene este artículo
Soviet heavy machine gun
12.7 mm DShK gun barrel Post-WWII version for T-54/55, BTR-60 etc. Aber 1:35
35L118 (35L-118) 2018 Nuevos moldes 13 April, 21:09
April 11, 2024
March 27, 2024
March 17, 2024
hiveloc
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
17 25 February, 17:54
hiveloc
The TC and loader are from the old Dragon "US Tank Crew" with some minor manipulations and the driver is from an old (Tamiya ?) AAV-7 kit that I built a Long time ago.
The TC and loader are from the old Dragon "US Tank Crew" with some minor manipulations and the driver is from an old (Tamiya ?) AAV-7 kit that I built a Long time ago.
15 March, 17:40
Carlos Cisneros
Thanks for the explanation. I was wondering if those guys were the Dragon figures…. At least the ones in the turret hatches… didn't even notice the driver until you mentioned him.
Thanks for the explanation. I was wondering if those guys were the Dragon figures…. At least the ones in the turret hatches… didn't even notice the driver until you mentioned him.
17 March, 04:59
March 15, 2024
January 23, 2024
hiveloc
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
4 imágenes
ZBD-05I’m not too happy with the paint, so it has been sitting on the back burner for now until I am motivated to fix it. It ...
10 25 July 2022, 21:07
January 5, 2024
November 14, 2023
November 13, 2023
November 12, 2023
October 19, 2023
September 26, 2023
September 25, 2023
September 21, 2023
hiveloc
Artículo completado
Artículo completado
Scimitar Mk2 CVR(T), TES(H) Operation Herrick, Afghanistan
Gecko Models 1:35
35GM0051 2021 Nuevos moldes 21 September 2023, 19:27
September 15, 2023
September 13, 2023
September 12, 2023
hiveloc
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
17 11 September 2023, 22:55
August 30, 2023
August 8, 2023
hiveloc
quiere este artículo
quiere este artículo
Spz Puma - Aufrüstsatz zum VJTF (for Hobbyboss and Rye Field Model)
3D ScaleModelWorx 1:35
0012.1 2022 Nuevos moldes 8 August 2023, 16:50
August 7, 2023
August 1, 2023
July 16, 2023
hiveloc
Who knows if this even exists? He sure had no trouble taking payment, then after 6 patient months of waiting and seeing posts of "I'm catching up on orders now," a refund with no explanation. It sounds like the original resin producer was great, but don't get your hopes up here.
Who knows if this even exists? He sure had no trouble taking payment, then after 6 patient months of waiting and seeing posts of "I'm catching up on orders now," a refund with no explanation. It sounds like the original resin producer was great, but don't get your hopes up here.
16 July 2023, 16:38
hiveloc
Who knows if this even exists? He sure had no trouble taking payment, then after 6 patient months of waiting and seeing posts of "I'm catching up on orders now," a refund with no explanation. It sounds like the original resin producer was great, but don't get your hopes up here.
Who knows if this even exists? He sure had no trouble taking payment, then after 6 patient months of waiting and seeing posts of "I'm catching up on orders now," a refund with no explanation. It sounds like the original resin producer was great, but don't get your hopes up here.
16 July 2023, 16:38
June 6, 2023
hiveloc
Nuevo álbum de fotos añadido
Nuevo álbum de fotos añadido
All comments (9) » 25 4 July 2022, 16:48
bk1009
No problemo, I was just sharing a tip I stumbled upon (maybe on Reddit?) when I was worrying about a set of Panzergrenadiers I made turned out paler than an Irish vampire XD By the way, thanks to the fantastic work you did with the BMD, I decided to grab me a couple of those (with one destined for some serious interbreeding with a BMP-3 😄 )
No problemo, I was just sharing a tip I stumbled upon (maybe on Reddit?) when I was worrying about a set of Panzergrenadiers I made turned out paler than an Irish vampire XD By the way, thanks to the fantastic work you did with the BMD, I decided to grab me a couple of those (with one destined for some serious interbreeding with a BMP-3 😄 )
4 June 2023, 15:45
bk1009
Ah, and one final thing I noticed while copying your work, errr... I mean while I was verifying how PE5 should look on the model - in case you want to take a photo of your fantastic BMD-4M with a deep field of view (so the entire bugger is in focus), but don't have access to the necessary camera/lens - you may want to give focus stacking a try. It's literally as easy as taking 3 pictures from (roughly) the same spot that focus on 3/5 spots on the kit and then using Enfuse (a fantastic free tool) to create a seamless composite image that's entirely focus. Ah, and if those pics are an artistic choice, uhh, please disregard this comment 🙂
Ah, and one final thing I noticed while copying your work, errr... I mean while I was verifying how PE5 should look on the model - in case you want to take a photo of your fantastic BMD-4M with a deep field of view (so the entire bugger is in focus), but don't have access to the necessary camera/lens - you may want to give focus stacking a try. It's literally as easy as taking 3 pictures from (roughly) the same spot that focus on 3/5 spots on the kit and then using Enfuse (a fantastic free tool) to create a seamless composite image that's entirely focus. Ah, and if those pics are an artistic choice, uhh, please disregard this comment 🙂
6 June 2023, 09:18
wnolder.php?lang=es
2023-06-06 09:18:39
2022-05-19 14:44:15
114733
/ajax/wnolder.php?lang=es&sd=2023-06-06 09:18:39&md=2022-05-19 14:44:15&filter=&w=114733
todo