F/A-18A+/B/CF-188
Kinetic | No. K48030 | 1:48
Hechos
- Marca:
- Kinetic
- Título:
- F/A-18A+/B/CF-188
- Número:
- K48030
- Escala:
- 1:48
- Tipo:
- Kit completo
- Publicado:
- 2016 Nuevas piezas
- Código de barras:
- 9588838161038 (EAN)
- Embalaje:
- Caja rígida (apertura superior)
- Tema:
- McDonnell Douglas F-18 Hornet » Reactores (Aeronave)
Marcas
McDonnell Douglas F-18 Hornet
McDonnell Douglas CF-188A Hornet
Royal Canadian Air Force - Aviation royale canadienne (2011-now)
- 409 Sqn. Nighthawk
Junio 2016
Medium grey over Ghost grey - 410 Sqn. Cougars
Junio 2016
Medium grey over Ghost grey - 425 Sqn. Alouette
Abril 2015
Medium grey over Ghost grey
McDonnell Douglas CF-188B Hornet
Royal Canadian Air Force - Aviation royale canadienne (2011-now)
- 410 Sqn. Cougars
Junio 2016
Medium grey over Ghost grey - 425 Sqn. Alouette
2015
Medium grey over Ghost grey
McDonnell Douglas EF-18A Hornet
Ejército del Aire (Spanish Air Force 1939-now)
- 12 Ala De Caza
2016
Ghost grey - 15 Ala de Caza
2015 Anatolian Eagle - Konya
Ghost grey
McDonnell Douglas F/A-18A Hornet
Royal Australian Air Force (1921-now)
- No. 3 Sqn. A21-57
2015 Operation OKRA - Persian Gulf
Medium grey over Ghost grey - No. 75 Sqn. A21-35
Abril 2015 Australian International Airshow - Avalon, VIC
Medium grey over Ghost grey - No. 77 Sqn. A21-4
2014
Medium grey over Ghost grey
McDonnell Douglas F/A-18A+ Hornet
Ejército del Aire (Spanish Air Force 1939-now)
- 46 Ala De Caza
2016
Ghost grey
Contenido de la caja
Bebedero de plástico, Bebedero de plástico (Clear), Piezas fotograbado, Hoja de calcas (al agua)
Dimensiones:
466x298x85 mm
(18.3x11.7x3.3 inch)
Boxart diseñado por Vincenzo Auletta
Línea temporal del producto
Kinetic
Nuevos moldes
Nuevas piezas
Nuevas calcas
Nuevas piezas
Nuevas piezas
Nuevas piezas
Nuevas calcas
Nueva caja
Rebox
Nuevas calcas
Nuevas calcas
Nuevas piezas
Nuevas calcasInstrucciones
Descargar 6925Kb (.pdf)
Mercado
Tiendas en línea
USD 63.59
En stock »
USD 67.99
En stock »
USD 68.55
En stock »
USD 95.83
Disponible »
CHF 57.20
USD 65.73En stock »
€ 55.89
USD 63.20En stock »Mostrar todas las ofertas » (16 en total)
Intercambio y comercio privado
SKU alternativos para Kinetic K48030:
KIN 48030 | KN48030 | KIN48030 | 48030
Nota: Los precios y la disponibilidad son sólo indicaciones. ¡Compruebe si el producto realmente coincide!
Productos relacionados
F/A-18A Hornet quick set 3D acrylic instrument panel
Red Fox Studio 1:48
RFSQS-48083 2022 Nuevos moldes 
F/A-18B Hornet quick set 3D acrylic instrument panel
Red Fox Studio 1:48
RFSQS-48084 2022 Nuevos moldes 
Kelik 1:48
Todos los productos relacionados » (266 en total)
Revisiones de caja
Reseñas externas
Anuncio
Revisión en caja
Cybermodeler
Revisión en caja
IPMS Deutschland
Revisión en caja
Hyperscale
Reseña
DN Models
Todas las reseñas » (10 en total)
Revistas
Todas las revistas » (9 en total)
Proyectos
1 imágenes
Cold Lake Cougar: 1/48th Kinetic CF-188A/B (F/A-18A/B) Hornet
1:48
See completed model at: https://www.flypastrush.com/post/cold-lake-cougar-1-48th-kinetic-cf-188b-hornet
Proyecto: F/A-18A+/B/CF-188
Galería
Todos los artículos » (14 en total)
Comentarios
Ron GarciaSecond build of this kit. I still had trouble with the refueling probe section. Not as bad this time. It just sits funny in the cockpit half. I won't make another, but if I did, I'd add part H6 after I constructed the forward fuselage so I could make adjustments to make it sit more flush in the closed position.
I didn't have as much trouble with the cockpit shroud the second time around either. I think the issue the first time was caused by the engineering of the upper fuselage itself. Because of the cut out for the aerial refueling probe, the starboard side doesn't have much plastic attaching to the rest of the fuselage. The plastic that is there is the lip where the cockpit shroud sits. I accidentally broke that the first time so it could have rode high after I repaired it. As it was, I nearly broke it again due to the finicky fit due to - you guessed it - the aerial refueling subassembly. The forward canopy still rode high and required sanding to blend it into the forward cockpit section.
29 March 2022, 00:08
Ron GarciaHaving finished several Hasegawa F-18s, I was interested how this kit would measure up. I thought it was easier to build than Hasegawa's. The flaps and ailerons are easier to install by far. Overall the fit was the parts was great - except for two things that caused me a serious headache!
The first was the aerial refueling probe. Just two pieces if you want it closed like I chose, three if not. The subassembly is added to the nose section, but the instructions aren't very clear how to do this. I figured it out but it sat too deep in the front cockpit. I played with it over and over and even reattached it several times but I was never able to get it to fit flush with the nose section. I ended up puttying it over and rescribed the panel outline. I don't know what I did wrong but I spent WAY too much time on a two piece subassembly.
The second major problem I had was with the cockpit shroud C25 of all things. There are three notches for it to fit into the top fuselage section so I placed it exactly where it was supposed to go. However, when I tried to add the forward canopy, the shroud interfered with it. The shroud sits too high so it forces the front canopy up a few mm instead of a smooth tradition into the fuselage. Again, I played with it over and over, but I couldn't get it to sit correctly. I ended up having to carefully carve the excess clear plastic in the front portion of the forward canopy where the canopy frame is and then add putty to the front of the fuselage to make a smooth transition. Again, I'm can't figure out what happened.
Aside from those two major problems, I liked the kit. I have a second one I'm going to put together next. That will let me see if those issues were bad luck, the kit or user error. I reserve judgement until I build the next one.
1 3 March 2022, 02:49
Material de referencia
Todos los libros » (64 en total) Todos los walkarounds » (45 en total)