EDUARD FW190A-8/R2 FULL BUILD SINGLE STEPS
Коментари
41 21 February, 19:34
![](/profiles/img/125872-847-s.jpg)
Welcome and thanks for your motivating words @Alec . First time I use something 3D printed and until now I enjoy it ☺️
25 February, 16:41
![](/profiles/img/125872-847-s.jpg)
Welcome @Nicolas, @ Rui and @DerMattes - thanks for your interest in this build 😊
26 February, 14:59
![](/profiles/img/125872-847-s.jpg)
A small update here ... engine took my a while to get fitted in the fuselage. Didn´t work precisely enough so I got paid off when I tried to put the engine in. Anyway I solved it somehow without any major visible impact.
11 March, 20:42
![](/profiles/img/33854-496-s.jpg)
I gotta. say that I really appreciated there build posts that people share; its a real treat to see a bunch of plastic and such come together into a masterpiece! I learn so much from watchings.
11 March, 23:46
![](/profiles/img/125872-847-s.jpg)
Welcome @Skyhiker - thanks for your interest on this build @Rui thanks for your kind words, even if I don´t think that anybody can learn much from my work .... but this is exactly what this stunning community is for ... I learned so much from people´s builds here ...
12 March, 08:09
![](/profiles/img/23938-707-s.jpg)
Glad you solved the hurdle. Any ideas why the engine did not fit, or what the issue was?
12 March, 12:37
![](/profiles/img/user-s.jpg)
1:72? I would have trouble with those tiny PE part of it were 1:32!! Well done on your precise work.
12 March, 13:04
![](/profiles/img/129970-991-s.jpg)
Great work Thomas!
Really impressed of your clean build and how you apply thiny amount of glue on all delicate small PE parts without creating a mess.
12 March, 13:16
![](/profiles/img/125872-847-s.jpg)
thank you all for your kind words - I really appreciate that and this motivates me to constantly push myself out of the comfort zone .... thanks thanks thanks!!!! @Neuling: I know your skills so I´m really glad you came around my build: the answer is patience and a glass of good wine 😆 @Alec: as you can see the engine comes in a lot of tine parts and I didn´t pay enough attention when removing the print support and grinding the parts down properly. This resulted in a too long engine assembly. Lucky my I always spend a lot of time on dry-fits so I recognized it before starting to glue it in. Almost complete front end is made of printed parts and slightest deviations result that engine cowlings won´t fit together. Not a must to have them completely align when you show them open but I want to paint the all in one and then open the cowlings once done ...
12 March, 17:59
![](/profiles/img/125872-847-s.jpg)
@Neuling … who drinks beer in glasses? 😂 but I guess it will work
12 March, 21:02
![](/profiles/img/132974-828-s.jpg)
What was the cause of engine fitting? I have just got the engine pack. Any advice?
Ah, I read your previous post. It seems that most folk seem to buy these things as an aesthetic object so hats off for taking this on!
4 April, 15:39
![](/profiles/img/125872-847-s.jpg)
@Trez: as you may have seen in previous comments, the most important thing is to really carefully sand all components down. Tend to say do a little more. There are many components coming together (assembled engine itself, manually modified fuselage, printed cowlings, ... ) and should fit properly in the end to avoid any gaps or twists in the final assembly. I think it would be tricky even in bigger scale. 1/72 scale has no mercy in this complex assembly of the plane front end. I managed it, but didn´t upload any pictures here so stay tuned 😊
5 April, 06:28
![](/profiles/img/52499-702-s.jpg)
Following! 👍, great job with cockpit and engine so far.
I have the exact same setup for an F-8 Würger in the shelf 🙂
5 April, 06:38
![](/profiles/img/125872-847-s.jpg)
@Trez: I will share some when I´m back - currently traveling and far away from my bench. @Sergej: thanks for your positive feedback, I hope my experiences on this build help to make yours a little bit more straight forward 😆
5 April, 17:28