Grumman A-6A Intruder
Trumpeter | No 01640 | 1:72
Факти
- Марка:
- Trumpeter
- Наименование:
- Grumman A-6A Intruder
- Номер:
- 01640
- Мащаб:
- 1:72
- Тип:
- Пълен комплект
- В продажба:
- 2023 Нова матрица
- Баркод:
- 9580208016405 (EAN)
- Опаковка:
- Твърда кутия (с отварящ се капак)
- Тема:
- Grumman A-6 Intruder » Реактивни самолети (Самолет)
Маркировки
Grumman A-6 Intruder
Grumman A-6A Intruder
US Navy (1794-now)
- VA-145 Swordsmen NE-507 | 155717
Януари 1973 Vietnam War - USS Ranger (CV-61)
FS36440 FS37875 FS14187 - VA-196 Main Battery NK-402 | 154147
1968 Vietnam War - USS Constellation (CV-64)
FS36440 FS37875 FS11136
Съдържание на кутията
Литник (Clear), Литник, Воден декал
Размери:
360x240x80 mm
(14.2x9.4x3.1 inch)
Хронология на продукта
Trumpeter
Инструкции
Изтегли 4596Kb (.pdf)
Пазар
Онлайн магазини
USD 28.36
В наличност »USD 29.24
В наличност »USD 38.21
В наличност »€ 25.99
USD 29.35В наличност »€ 29.50
USD 33.32В наличност »zł 98.84
USD 26.10В наличност »Покажи всички оферти » (12 общо)
Алтернативни SKU за Trumpeter 01640:
TU01640 | TRU01640 | TRUM01640 | TR01640 | TRP01640 | TRMP-01640
Забележка: Цените и наличността са индикативни. Проверете дали продуктът действително съвпада!
Свързани продукти
Всички свързани продукти » (58 общо)
Преглед на съдържанието
Външни прегледи
Реклама
Преглед Mojo Rising Modelling
Преглед RW Hobbies
Списания
Проекти
Коментари
SRW
The forward main landing gear doors and compartment are missing! Some kit of the year!
The forward main landing gear doors and compartment are missing! Some kit of the year!
All comments (8) » 4 12 February, 17:32
Oleg Bogolei
yes, but they made a flat wall between front and rear section, so it is impossible to modify to make it looks more or less real, only cut and make a absolutely new bay
yes, but they made a flat wall between front and rear section, so it is impossible to modify to make it looks more or less real, only cut and make a absolutely new bay
1 April, 11:11
Casey Beckett
Great new kit, a few wee issues - scales out darn near perfectly.
Seen several reviews complaining about fin cap shape - it is darn near spot-on. I worked on A-6s for over ten years, know this airframe intimately.
Couple small things I've caught as I contemplate my build -
- Big complaint from many, but not quite correct - some A-6A WERE IN fact retrofitted with MB GRU-7 seats, so this should not be a huge issue - anyone doesn't believe you, get this book - Intruder: The Operational History of Grumman's A-6 by Mark Morgan
- the 'slime lights' on the wing tips and fuselage above and forward of the speed brakes are wrong for an A-6A. A-6A did have a small formation light on the fuselage.
- Pitot tube is far too thick and too long
- 'v' shaped tabs on rear of radome are far too thick, in real life this very thin steel straps
- A-6A had one anti collision beacon on the nose door, not one one each intake belly as the kit has. So; one, not three as the kit has.
- Cockpit got the B/N lower and to the rear of the pilot pretty well.
-Instrument panel as molded would be a great depiction of a KA-6D tanker for starters, as the B/N had very little in front of him.
-Engine face is way too far forward - real aircraft the fan face was almost below the main wing root leading edge.
- Canopy is crystal clear and I think nailed the slight 'bulge' of each side of the canopy.
- several small vents are wrong for the -A, but correct for an -E or Tram model.
I won't complain about ordnance, they do all look pretty sketchy! (Fuel tanks look ok)
Overall, I am very happy to have a new mold, and will be getting the Tram version too
Great new kit, a few wee issues - scales out darn near perfectly.
Seen several reviews complaining about fin cap shape - it is darn near spot-on. I worked on A-6s for over ten years, know this airframe intimately.
Couple small things I've caught as I contemplate my build -
- Big complaint from many, but not quite correct - some A-6A WERE IN fact retrofitted with MB GRU-7 seats, so this should not be a huge issue - anyone doesn't believe you, get this book - Intruder: The Operational History of Grumman's A-6 by Mark Morgan
- the 'slime lights' on the wing tips and fuselage above and forward of the speed brakes are wrong for an A-6A. A-6A did have a small formation light on the fuselage.
- Pitot tube is far too thick and too long
- 'v' shaped tabs on rear of radome are far too thick, in real life this very thin steel straps
- A-6A had one anti collision beacon on the nose door, not one one each intake belly as the kit has. So; one, not three as the kit has.
- Cockpit got the B/N lower and to the rear of the pilot pretty well.
-Instrument panel as molded would be a great depiction of a KA-6D tanker for starters, as the B/N had very little in front of him.
-Engine face is way too far forward - real aircraft the fan face was almost below the main wing root leading edge.
- Canopy is crystal clear and I think nailed the slight 'bulge' of each side of the canopy.
- several small vents are wrong for the -A, but correct for an -E or Tram model.
I won't complain about ordnance, they do all look pretty sketchy! (Fuel tanks look ok)
Overall, I am very happy to have a new mold, and will be getting the Tram version too
3 17 March, 02:28
Материал за справка
A-6 Intruder In U. S. Marine Corps Service and Navy Test & Evaluation Squ...
Colors & Markings Series No 7
Rock Roszak, Mike Heideman
2023 Всички книги » (26 общо) Всички walkarounds » (15 общо)