база даних масштабного моделювання | менеджер запасів
Lochsa_River
Lochsa River (Lochsa_River)
IM

Vega model 5 "Lady Lindy"

Коментарі

63 20 November 2022, 07:11
Cuajete
Following.
20 November 2022, 18:55
Живко Джаков
I'm watching with interest. I am temporarily not working on my Carl Benjamin Eielson and George Hubert Wilkins model project.
21 November 2022, 06:38
Lochsa River
...the Special Hobby folks used these exact molds to create an Amelia Earhart version....the fact the windows need to be filled in is sort of glossed over.....

...however, their decal guide states none of the wing decals or tail decals were present for the Atlantic Ocean crossing...just the gold striping....a sort of bare and austere but totally red model....

....so, the local modeler decided the inspection windows on wing bottoms will need to be drilled, cut and sanded out, with some appropriate gizmology (just added to dictionary) installed behind them with a clear covering....the wings will need something....and, this is accurate after a fashion and will be added to the no holds barred Canadian floatplane version underway....
23 November 2022, 05:25
Villiers de Vos
I will also follow along.
23 November 2022, 13:05
Jv
Will take a seat to
Fantastic work sofare
26 November 2022, 06:18
Cuajete
I agree with Jv 👍
26 November 2022, 18:31
Cuajete
Well done so far.
9 December 2022, 20:33
Lochsa River
Earhart version primed...still some rough spots
15 December 2022, 06:34
Skyhiker
Following
16 December 2022, 21:42
Michael Kohl
I have Earharts Electra in my stash. So anxious about this one too.
18 December 2022, 12:30
Lochsa River
REBOOT...the paint laid down well and much is fine...but, the windows, designed to leave a slight impression like the original...just did not work and will be filled in and leveled...the wing had fit issues as well...and i didn't like the canopy result...other than that...no issues....kidding aside, it all will get stripped off and redone...
19 December 2022, 20:58
Jv
I had to put sun glasses on
Very shiny nice work Lochsa
20 December 2022, 00:04
Skyhiker
I'm not sure if it is the lighting in the photos, but that red looks a little too orange to me.
20 December 2022, 01:46
Skyhiker
The windows on the wings might look better if you cut them out and fill them with clear epoxy or glue-in-glaze.
20 December 2022, 01:51
Robert Podkoński
That's serious modelling going on here - I am really impressed already! Keep it up, LR!
20 December 2022, 07:12
Lochsa River
thanks all....its not fun to reboot but it is necessary.

...the inspection holes were tried by cutting them out but i did not do it well...then i tried decals...no good...so, paint was the answer for this middling modeler...

....maybe the mix should be more RED than Insignia RED...i will adjust the mix a bit...
20 December 2022, 08:05
Michael Kohl
I cross my fingers. That some kit makers don't bother to adjust molds or give respective information holds true for Special Hobbys Lockheed Electra Model 10 too. To create a version Amelia Earhart flew, you too have to figure out, which panels to add, which windows to close, which antenna...you get the point.
20 December 2022, 08:24
Lochsa River
I quit making the Dora Wings 1/48 scale Earhart Vega due to no inspection windows and many other complaints....the engine was good, though...
20 December 2022, 08:33
Lochsa River
....it is hard to imagine how the orginal Vega looked when Amelia Earhart touched down after the famous Atlantic trip (with a 4000 foot uncontrolled drop over the ocean)...

....but it had no Lockheed painting on it and, upon reflection, i bet the red was a bit more red/scarlet than the plane in the Smithsonian...which was how it looked after the Lockheed people repainted it...

...a more subdued RED may be called for altogether...
20 December 2022, 11:43
Lochsa River
...if the views of the future for modeling are correct....a 3D decal of that window, complete with gizmology behind it and reflections, etc....will be provided as a file we all print and lay down as a 3D decal....

...sign me up....
20 December 2022, 11:54
Lochsa River
...check this out...

micromark.com/HO-sca..ther-surface-details
20 December 2022, 11:55
Łukasz Gliński
Joining the party, nice progress
20 December 2022, 14:53
Живко Джаков
About the windows. I have a similar drama. The version I'm trying to create has windows at the bottom and only a few at the top. And to complete the drama, the door is not visible in any photo. Apparently, customers had a lot of freedom when ordering the machine.
[img1]
 
20 December 2022, 18:22
Lochsa River
You are a brave modeler to take on so many changes in this small scale.
20 December 2022, 21:50
Skyhiker
I assume you have seen this link...
airandspace.si.edu/c..rt/nasm_A19670093000
20 December 2022, 22:00
Skyhiker
Youtube Video
 
20 December 2022, 22:06
Skyhiker
The color in the video is a little closer to your model than in the 29 photos from the Smithsonian's website. Just a touch more red should do the trick, but it's hard to say how close these restorations are. I would assume that they have done extensive research.
20 December 2022, 22:13
Skyhiker
Youtube Video
 
20 December 2022, 22:16
Skyhiker
The lighting in the restoration hall is better.
20 December 2022, 22:22
Lochsa River
These videos are great! Never stumbled on them in all the searches.....great closeups...
20 December 2022, 22:27
Skyhiker
[img1]
 
20 December 2022, 22:48
Skyhiker
The tail number and logo seems to have evolved over time.
20 December 2022, 22:57
Michael Kohl
Thanks Skywalker for the links.
20 December 2022, 22:58
Finn
Love to see the final result
30 December 2022, 14:46
Skyhiker
Looks good
30 December 2022, 18:11
Transall NG
Nice ! I'm presently reading the excellent book from Richard Sanders Allen and i'm dreaming of Vegas...
31 December 2022, 23:43
Lochsa River
I finally read the fine print of the VMS varnish on their website (or any varnish?)......3-4 days to 75% durability and TWO WEEKS to final durability...i waited 24 hours...anyway,,,,the paint has been stripped off where the issue was and it will get repainted....
1 January 2023, 07:05
Cuajete
Looks great!
9 January 2023, 18:31
Mona
beautiful work looking good ,I haven't been able to locate the special hobby kit would like to build one
10 January 2023, 04:19
Lochsa River
The kits are no longer made but there are still some on EBay

https://ebay.com/itm/1254661..OA%3D%7Ctkp%3ABk9SR5zN-5-zYQ

https://ebay.com/itm/1551168..I0%3D%7Ctkp%3ABk9SR5zN-5-zYQ

there are other VEGA 5 versions by MPM using the same molds....i have extra decals...if you PM me, i will send some to you.
10 January 2023, 04:51
Michael Kohl
The color now looks really spot on. The surface seems to be still a bit grainy.
10 January 2023, 07:18
Lawrence Landis
Very nice work.
12 June 2023, 10:53
Cuajete
Good progress!
12 June 2023, 17:48
Steve Desarzens
www what a build ! it looks extra 🙂
12 June 2023, 19:28
Guy Rump
Very impressive modelling. 👍
18 June 2023, 06:23
Curatorm
smart model!
18 June 2023, 07:10
Villiers de Vos
Very nice work.
18 June 2023, 07:31
Jv
Always admire your work
Butiful
18 June 2023, 08:57
Neuling
Schön!
18 June 2023, 09:31
Lawrence Landis
You have produced a beautiful aircraft with great fidelity to detail. Congratulations on a job well done.
18 June 2023, 09:45
Cuajete
Great job. Congrats!

Cockpit glass is painted?
18 June 2023, 18:09
Łukasz Gliński
Lovely 👍
19 June 2023, 17:44
Mirko Römer
Oh yeah!
19 June 2023, 17:46
Skyhiker
Congratulations. It came out great.
19 June 2023, 19:03
Lochsa River
Thanks mates! Love your feedback

The cockpit glass is painted on the inside
20 June 2023, 04:40
Bernd Grün
A really beauty! Congratulation! 👍
20 June 2023, 06:28

Album info

...the Amelia Earhart Vega with a bold red paint scheme..

28 зображення
1:72
Завершені
1:72 L. Vega model 5 "Winnie Mae & Lady Lindy" (MPM Production 72523)

Group Build

Vega 5 in
Vega 5

1. Листопад 2022 до 31. Грудень 2023

Усі альбоми

Переглянути всі альбоми »