Макетарска база података | Менаџер залиха

Soviet SU-100Y Self-Propelled Gun

Trumpeter | No. 09589 | 1:35

Boxart SU-100Y Self-Propelled Gun 09589 Trumpeter

Чињенице

Бренд:
Trumpeter
Наслов:
Soviet SU-100Y Self-Propelled Gun
Број:
09589
Размера:
1:35
Тип:
Целовита макета
Издато:
2021 Нови алат
Бар код:
9580208095899 (EAN)
Паковање:
Чврста кутија (са поклопцем)
Тематика:
T-100 » Тенкови (Возила)

Садржај кутије

Величине:
410x260x78 mm (16.1x10.2x3.1 inch)

Тежина:
647 g (1.43 lbs)

Временски оквир производа

 
Trumpeter
Пун историјат »

Тржиште

Интернет продавнице
Logo Squadron Hobbies
USD 60.74
USНа лагеру »
Logo Super-Hobby.com
USD 71.31
PLНа лагеру »
Logo Hobbylinc.com
USD 76.39
USНа лагеру »
Logo MegaHobby.com
USD 79.01
USНа лагеру »
Logo Sprue Brothers Models
USD 89.49
USНа лагеру »
Logo 1001hobbies.com
USD 67.08
FRРасположиво »

Прикажи све понуде » (16 укупно)

Алтернативни СКУ-ови за Trumpeter 09589:
TR09589 | TRU09589 | TRUMPETER09589 | TRUM09589 | PKTM09589 | TR 09589

Белешка: Цене и доступност су само информационог типа. Такође проверити да ли се производ подудара!

Сродни производи

35L-339
130mm Soviet B-13 barrel for SU-100Y SPG
Aber 1:35
35L-339 2023 Нови алат

In-box рецензије

Екстерне рецензије

Није нам позната ни једна In-box рецензија за ово SU-100Y Self-Propelled Gun (#09589) од Trumpeter.

Пројекти

27 слике
Su-100Y SPG 1:35 TrumpeterView album, image #1
1:35
1:35 SU-100Y Self-Propelled Gun (Trumpeter 09589)

Коментари

Ron Garcia
Not a "paper panzer" as the Soviets did make one example so I decided it build this tank. This is very large tank but a quick build due to minimal details and no turret. The minimal details comment is not a criticism. I guess the original tank's exterior was spartan and so it is on this one.

I had four track links left over with a slight sag so you will pretty much be using all of them. Cutting them all out and cleaning up the attachment points takes longer than putting them together. If you leave the drive sprocket and idler wheel loose, you can remove the tracks for painting and reinstalling.

The front periscope was the only thing that gave me a bit of trouble. The directions show gluing in part GP1-2 first before D6. I would reverse that. D6 has a frame around the top that goes over the periscope. With GP1-2 in place beforehand, there's no way to get the frame around the periscope and securing it to the upper hull. The holes for D6 are also too small so I had to widen them to get the part to fit. The directions do say to install D6 first but that's on the second drawing so it's not immediately clear they are talking about the entire step 4. I didn't realize this and it caused me problems so be careful. Also, the covering, part D7, doesn't quite go low enough over the periscope in my opinion. If you install it into the notches, the covering leaves the top of the periscope exposed. I modified mine so it sat closer to part GP1-2.

When attaching the cable end to part E3, the only way to do so is to cut one side of part D15 so you can spread it open like a clasp and then attach it over the bar in the middle of part E3. That being the case, it would probably be easier to cement part E3 in place and attach the cable afterwards. I super glued E3 on after I painted the tank and cable. It was a little awkward with the cable attached to it.

Other than that, this was a trouble free build. The gun even elevates (I've had trouble with this on other recent builds). It looks good sitting on my shelf next to my SMK and T-100 tanks. Recommended if you want an easy build of a very large and obscure early WWII Soviet tank.
2 5 July 2022, 18:29