база данных по моделизму | управление закромами
StevenVD
Steven Van Dyck (StevenVD)
BE

Crusader

Комментарии

1 9 June 2019, 20:42
Steven Van Dyck
The Crusader is in the air tonight. I bought the AeroMaster decals before I saw the many kit options, so it is not certain they will get used.
9 June 2019, 20:45
Steven Van Dyck
I painted a lot of interior parts white. Eduard errs in displaying the landing light location. It's supposed to come on the right wheel well door, not left! Luckily, there is Primeportal, though some F-8 pictures seem lost. primeportal.net/hangar/f-8_home.htm
24 June 2019, 21:36
Steven Van Dyck
The fuselage is closed and the wings are completed. Some parts don't fit perfectly but it can be remedied with plasticard.
27 June 2019, 21:40
Steven Van Dyck
A lot of pictures about the Eduard colored ejection seat PE. The masking set is also cool, you get a double set for spraying the panel lining first.
7 July 2019, 10:28
Slavo Hazucha
Crisp seat and cockpit! Will keep an eye on this coming along...
7 July 2019, 19:25
Jos Jansen
One of my favorite carrier-based jet aircraft...following! 👍
7 July 2019, 21:17
Sergej I
Nice! In!
7 July 2019, 21:37
Nathan Dempsey
Great start in the cockpit. Following
7 July 2019, 22:24
Steven Van Dyck
Thanks for tuning in! I hope to start painting the fuselage soon.
8 July 2019, 05:03
Holger Kranich
Real nice pit and bang seat! Is this the former Academy tooling?
8 July 2019, 06:54
Stephan Ryll
Nice start on that last gunfighter 👍
8 July 2019, 18:18
Daniel
yep, I'll take a seat here
8 July 2019, 18:36
Steven Van Dyck
Take all the seats you want, people, the show is still running. Today the white primer went over the fuselage. It appears the jet exhausts fits snugly on the Tamiya turntable shaft. Primer used is a Rust-oleum rattle-can.
@Holger: no, it's ex-Hasegawa.
8 July 2019, 19:02
Steven Van Dyck
The yellow lines have been painted on the canopy (Eduard wanted these to be Flesh, I doubted about that) and then I started to put some dust on the panellines, followed by some post-shading.
15 July 2019, 21:45
Steven Van Dyck
The Light Gull grey and the shadows are sprayed on. Masking was not so hard, but I used pieces of paper to cut back on tape.
18 July 2019, 22:04
Clifford Keesler
Looking very nice indeed.
18 July 2019, 22:27
Slavo Hazucha
The shading looks excellent - good idea to use the brown-ish color for pre shading, the blend with the grey creates a really great outcome. Good show so far! 🙂 👍
18 July 2019, 22:35
Urban Gardini
Somehow I've missed this one but now I'm in the crowd...
18 July 2019, 22:35
Steven Van Dyck
Thank you, guys, and anybody welcome to the show. I now painted the wing tips yellow for the VF-103 Sluggers version. Even the yellow decals I treated with the brownish pinwash. I also used Daco Strong now, so I can't move the little unit decal left to where it should be.
23 July 2019, 23:48
Tim Heimer
Yes, looking good!
24 July 2019, 00:22
Holger Kranich
Very nice job on the decals!
24 July 2019, 06:01
Jos Jansen
Nice job so far Steven....I love the subtle shading 👍
24 July 2019, 07:56
Stephan Ryll
Comming along nicely 👍
24 July 2019, 16:12
Slavo Hazucha
The shading on the yellows adds a lot of individual atmosphere to the finish. Well placed effort & nice progress overall 👍
24 July 2019, 17:18
Steven Van Dyck
Thanks, guys! The stencils have now all been placed, I removed a few that will necessitate a local repaint.
25 July 2019, 16:51
Steven Van Dyck
I seem to have botched the panel lining. I thought Humbrol enamel would wash away easily, but it's if I had used acrylic paint, it won't budge. It does with aceton, but then my Gull Grey also parts. The good news is that I ordered 4x Eduard's AIM9-D and 2x CMK Mk82 bombs, filling up the voids in this kit.
1 August 2019, 23:54
Clifford Keesler
What type of clear coat did you use? If you are going to use an enamel wash, you need to use an acrylic clear coat, then removing the enamel wash will not damage the enamel paint underneath. But looking very nice.
2 August 2019, 01:32
Steven Van Dyck
It was Vallejo Gloss from a spray can, which is an acrylic coat. It is possible to scrape it from the white primer with some effort, like you see on the result picture, but not from the grey paint without showing the primer underneath.
2 August 2019, 09:20
Steven Van Dyck
The wash problem is solved, somebody told me to use white spirit and this had a totally different effect on the Humbrol wash. Now it was easily wiped away. This is a great relief after the uneffective attempts with benzene (doing nothing) and aceton (removing the paint with the wash). The last pics show some payload I bought.
2 August 2019, 19:55
Clifford Keesler
Glad you got your problem solved. I totally forgot to mention the white spirit. That is what I use to remove my washes. DUH!!. Dumb Me.
2 August 2019, 20:45
Slavo Hazucha
It looks superb now - including the perfectly added decals 👍
3 August 2019, 05:11
Steven Van Dyck
Thanks for the comments! 4 Sidewinders are on their way to the Crusader, with the same white primer on them. The PE jig wasn't much help, in the end I just aimed the fins myself.
5 August 2019, 22:30
Steven Van Dyck
I found the MERs in the mail today and started to adapt the model to receive the wing- and Y-pylons. Apparently the put all the ejector marks on the visible side of the pylons. You see pictures of what's in the Eduard set.
13 August 2019, 22:39
Steven Van Dyck
The MERs have been primed white after assembly and some scratchwork to backdate them.
15 August 2019, 23:29
Michael Phillips
Missed this one! Don't often see the last of the gunfighters built here, but you have really done a nice job on this one. I will be following along the rest of the way!
16 August 2019, 01:29
Stephan Ryll
Very nice progress Steven 👍
16 August 2019, 04:41
Steven Van Dyck
Thanks, guys! You're wellcome.

Now there is the question of installing the bomb racks on the pylons.

[img1]
 


I have a suspicion that Eduard has constructed the old style MER wrongly on the middle of this picture. It has the attachment parts of version "a" together with those of version "b" that I built. It also seems like the MER is a bit too short for the pylon. I don't think this can be remedied now.

[img1]
 
17 August 2019, 12:45
Steven Van Dyck
I painted all ordnance and rockets, it's just preparing for the decals now. I used silver and gun metal for the sidewinders and Nato Green for the bombs.
27 August 2019, 21:25
Steven Van Dyck
I had to remove the CMK bomb tail fins, they were completely overscale. It's as if they had originally designed them thinner, like in the instruction guide included, but then they noticed that it broke, so they had to thicken it. I replaced them with carefully inserted sheet styrene fins, so that will only mean a minimum of repainting.
28 August 2019, 22:23
Holger Kranich
You are doing a real good job on the Crusader! And the tail fins where out of scale, yes!
29 August 2019, 05:09
Urban Gardini
Well, we've seen muzzle brakes that been a bit more out of scale than these tail fins. But yes, over scale they're...
29 August 2019, 07:39
Holger Kranich
ROFL! 😄
29 August 2019, 08:07
Slavo Hazucha
Nice job with the sheet! This is going on very nicely 👍
29 August 2019, 08:16
Steven Van Dyck
Thanks! I just finished the decals and did a grey wash on the rockets. The Y-racks seem crooked, but this is actually logical to make room for the tank probe left.
1 September 2019, 22:30
Clifford Keesler
Looking very nice Steven, I really like the weathering.
2 September 2019, 01:42
Jos Jansen
Nice!
2 September 2019, 08:37
Steven Van Dyck
Thanks, Jos and Clifford. The Crusader is now finished and ready for Scaleworld this Sunday. I decided to spread the two bombs because they do not even fit together on one MER. This can be caused by two options, either the MER's are too short or the bombs oversized. The lesson is, don't mingle upgrade brands if it is not necessary. I also added braking lines, scrach clearparts (couldn't find back the Eduard Sidewinder lenses, but I managed to polish something that would be hard to discern from them) and I painted the cockpit behind area. It was a fun build and I like the results, so I think it will do well at the contest.
11 September 2019, 14:36
Paul Juliano
Hello beautiful, do you fly here often? Steven, this is incredible work. Good luck on Sunday.
11 September 2019, 14:48
Slavo Hazucha
Great finish - the "old Navy" at it´s best 👍, the main colors + the yellow really work together perfectly & the details too all look very handsome! Have a good show at Scaleworld!
11 September 2019, 15:16
Steven Van Dyck
@Paul: thanks, I mostly roll here, but sometimes a plane will do.
@Slavo: thank you for the acclaim.
I jus noticed a detail for those who want to use MER's on the Crusader: apparently I still used too many parts on them. I found a pic where the bombs only connect with the two bomb contact points. The four MER contacts are probably used on more modern designs. It would mean that you would have to insert wires into the bomb and the MER to have a sound connection.

[img1]
 
11 September 2019, 15:22
Soeren R.
Really nice Crusader
11 September 2019, 16:01
Nathan Dempsey
Beautiful Crusader! Good luck at the show 🙂
11 September 2019, 16:24
Urban Gardini
She's a beauty!
11 September 2019, 17:47
Michael Phillips
Absolutely stunning! Wow!!!
11 September 2019, 18:01
Konrad -
Amazing work Steven 👍!
11 September 2019, 18:58
Clifford Keesler
Beautiful Crusader Steven, well done.
11 September 2019, 23:54
Holger Kranich
Hi Steven and good luck at Scaleworld!
12 September 2019, 05:01
Stephan Ryll
Very nice F-8 Steven 👍
12 September 2019, 15:13
Daniel
I agree, makes me want to build one
12 September 2019, 21:29
Steven Van Dyck
The Crusader has won silver in standard 1/48 airplanes at Scaleworld. Thanks to all the audience here!
15 September 2019, 17:50
ForestFan
Looks great
15 September 2019, 18:49
Steven Van Dyck
Thanks, this is how it looked at the contest. I used a square mirror on an upside down photo fame.

[img1]
 
15 September 2019, 19:38
Tim Heimer
Nice work payed off I see. Congratulations!
15 September 2019, 19:47
Konrad -
Congrats Steven! Well deserved 👍
15 September 2019, 20:23
Nathan Dempsey
Congratulations on the silver Steven. Great work!
15 September 2019, 20:46
Slavo Hazucha
Congrats!! Absolutely deserved (y€
16 September 2019, 06:58
Kim Branders
Congrats.
16 September 2019, 08:34
Stephan Ryll
Well deserved 👍 congrats 🙂
16 September 2019, 09:35
Urban Gardini
Congrats mate, well deserved...
16 September 2019, 10:35
Paul Juliano
Bravo my friend!! Most deserved.
16 September 2019, 12:01
Jos Jansen
That's a beautiful piece of art...congrats, well deserved 👍!
16 September 2019, 12:02

Project info

184 изображения
1:48
Завершённые
1:48 Crusader (F-8E) (Eduard 11110)1:48 Colorful Crusaders Pt. V (AeroMaster 48-563)1:48 AIM-9D Sidewinder (Eduard 648156)2+
Vought F-8E Crusader
US US Navy (1794-now)
VF-103 Sluggers 150303 / 201 / AJ
USS Forrestal (CV-59)
FS36440 FS17875
 

Все альбомы

Посмотреть все альбомы »