F-4C Eduard Good Eevening Da Nang
Комментарии
2 6 April 2017, 22:25
Donald Dickson II
So finally got to this baby. You can see I got some extras beyond what came with the re boxing. The Eduard Big Sin weapons kit, canopy striping, intake decal, walkway decals (though I wont be using those for this version I think).
It has been going together relatively smoothly. The cockpit flew together and the PE dressed it up beautifully. Though I cant find the pics of it before it was placed into the fuselage. I deviated from the instructions as it made no sense to build the wheel wells THEN put them on the wing. Easier to do so right onto the wing. Things like that.
The only real gap issues have been the intakes (is there an F-4 model that doesnt have some level of issue there?) and the underside where the front joins the wing. Though they are not that bad. Some bending and fiddling got them much better than the initial dry fit showed.
So finally got to this baby. You can see I got some extras beyond what came with the re boxing. The Eduard Big Sin weapons kit, canopy striping, intake decal, walkway decals (though I wont be using those for this version I think).
It has been going together relatively smoothly. The cockpit flew together and the PE dressed it up beautifully. Though I cant find the pics of it before it was placed into the fuselage. I deviated from the instructions as it made no sense to build the wheel wells THEN put them on the wing. Easier to do so right onto the wing. Things like that.
The only real gap issues have been the intakes (is there an F-4 model that doesnt have some level of issue there?) and the underside where the front joins the wing. Though they are not that bad. Some bending and fiddling got them much better than the initial dry fit showed.
6 April 2017, 22:35
Murad ÖZER
samo, instructions are a bit weird and the intakes are going tı need some elbow grease but apart from these if i didn't know i wouldn't believe this is an academy kit, surprising honestly.
samo, instructions are a bit weird and the intakes are going tı need some elbow grease but apart from these if i didn't know i wouldn't believe this is an academy kit, surprising honestly.
7 April 2017, 03:22
Kerry COX
That's what had me park my academy F-4 in the box too. The gap and struggle to get things to 'align' was just a bit beyond what I was ready for. But good going with it mate. 👍
That's what had me park my academy F-4 in the box too. The gap and struggle to get things to 'align' was just a bit beyond what I was ready for. But good going with it mate. 👍
7 April 2017, 03:27
Donald Dickson II
I got them to the point where I think I will not have to do a lot of sanding. At least I am hoping that is the case. I will shoot a bit of paint and see how they look and go from there.
Murad, yes, the directions are certainly wonky. And I am definitely surprised as to the issue with intake fit. I have heard so many raves about the Academy kit. But to be fair, everything else has gone well so far.
I got them to the point where I think I will not have to do a lot of sanding. At least I am hoping that is the case. I will shoot a bit of paint and see how they look and go from there.
Murad, yes, the directions are certainly wonky. And I am definitely surprised as to the issue with intake fit. I have heard so many raves about the Academy kit. But to be fair, everything else has gone well so far.
7 April 2017, 05:29
Donald Dickson II
So between life stuff, some progress made. All major parts except vert stabs on. Cockpit blue tacked in place for painting. First brown went on, then blue tack worms. I don't usually do this, but what the heck. Then dark green sprayed. Not shown yet, but more blue worms and med green has been sprayed.
So between life stuff, some progress made. All major parts except vert stabs on. Cockpit blue tacked in place for painting. First brown went on, then blue tack worms. I don't usually do this, but what the heck. Then dark green sprayed. Not shown yet, but more blue worms and med green has been sprayed.
27 April 2017, 18:05
Michael Phillips
Not sure how I missed this... But nice start to what looks like an epic project! Keeping an eye on your progress!
Not sure how I missed this... But nice start to what looks like an epic project! Keeping an eye on your progress!
27 April 2017, 18:07
Stephan Ryll
I'm also in - have the same kit on my bench - saw quit few F-4's kreeping to live here at the moment 🙂
I'm also in - have the same kit on my bench - saw quit few F-4's kreeping to live here at the moment 🙂
27 April 2017, 18:19
Donald Dickson II
OK, camo is on, but far from done. Still have to even things out a bit and do touch ups. Then I will be applying light coats of the colors lightened with white to make it faded.
OK, camo is on, but far from done. Still have to even things out a bit and do touch ups. Then I will be applying light coats of the colors lightened with white to make it faded.
27 April 2017, 21:19
Choppa Nutta
great kit, want one 😄
love the camo you've gone with
can't beat a Nam aircraft 🙂
great kit, want one 😄
love the camo you've gone with
can't beat a Nam aircraft 🙂
27 April 2017, 21:39
Donald Dickson II
Choppa, I have done so many over the years, and I never get tired of that pattern. The kit is awesome (but for those intakes) so I would say go for it.
Choppa, I have done so many over the years, and I never get tired of that pattern. The kit is awesome (but for those intakes) so I would say go for it.
27 April 2017, 21:42
Holger Kranich
Very cool build! The intake - issue is a pitty but nevertheless the Rhino looks nice! How do you like the Big Sin goodies?
Very cool build! The intake - issue is a pitty but nevertheless the Rhino looks nice! How do you like the Big Sin goodies?
5 May 2017, 14:16
Donald Dickson II
Thank you gents! 🙂
Holger, they are very nice indeed! The only issue I have had is the rear fins on the sidewinders are paper thin. I have managed to break two of them off so far. But, that is my own ineptness.
Murad, I am going with the plane with the blue stripes on the fuselage.
Thank you gents! 🙂
Holger, they are very nice indeed! The only issue I have had is the rear fins on the sidewinders are paper thin. I have managed to break two of them off so far. But, that is my own ineptness.
Murad, I am going with the plane with the blue stripes on the fuselage.
5 May 2017, 20:19
Clifford Keesler
Excellent, how did I miss this one. I agree with the wonky instructions, I built my wheel wells in the wing also and left the main gear struts off until last. I don't remember having any problems with my intakes. I built the "B" model though. I may have but don't remember it.
Excellent, how did I miss this one. I agree with the wonky instructions, I built my wheel wells in the wing also and left the main gear struts off until last. I don't remember having any problems with my intakes. I built the "B" model though. I may have but don't remember it.
6 May 2017, 01:36
Donald Dickson II
Got some more done today. Worked on missiles (no pics there yet) and some painting. I faded the colors. I mixed them up with some white to make a lighter shade. Then I sprayed them in a pretty much random manner. This is just the first stage of weathering. I like how it turned out, but welcome any comments or further ideas.
Got some more done today. Worked on missiles (no pics there yet) and some painting. I faded the colors. I mixed them up with some white to make a lighter shade. Then I sprayed them in a pretty much random manner. This is just the first stage of weathering. I like how it turned out, but welcome any comments or further ideas.
10 May 2017, 02:35
Donald Dickson II
Thank you sir. 🙂
I have an issue with that damn decal though. The blue stripes. You will notice a line running down the middle of it. That's because it was two decals. NOT the best design IMO. I got it slightly better than in the pic, but not much. Now I don't know if I can live with that or not. And trying to paint that would not be an easy thing at all. *sigh*
Thank you sir. 🙂
I have an issue with that damn decal though. The blue stripes. You will notice a line running down the middle of it. That's because it was two decals. NOT the best design IMO. I got it slightly better than in the pic, but not much. Now I don't know if I can live with that or not. And trying to paint that would not be an easy thing at all. *sigh*
24 May 2017, 03:33
Clifford Keesler
It doesn't really look that bad Donald. Maybe you can match the blue and touch it up with paint, if you can't live with it as is.
It doesn't really look that bad Donald. Maybe you can match the blue and touch it up with paint, if you can't live with it as is.
24 May 2017, 19:21
Michael Phillips
It doesn't look bad to me, and Clifford offers a good option to try to make it less noticeable. I assume they did it that way because making a decal that size to go over those contours on both side as one decal would be pretty difficult to deal with I think.
It doesn't look bad to me, and Clifford offers a good option to try to make it less noticeable. I assume they did it that way because making a decal that size to go over those contours on both side as one decal would be pretty difficult to deal with I think.
24 May 2017, 19:30
Donald Dickson II
Thanks guys, but it was making my eyes twitch. A LOT. I ended up removing them and going with the plane featured on the cover.
Thanks guys, but it was making my eyes twitch. A LOT. I ended up removing them and going with the plane featured on the cover.
25 May 2017, 06:29
Clifford Keesler
Who did the blue stripes belong to. Was that "Boots Belsae's " aircraft? I have decals for his A/C. That is what my next F-4 will be done in. I have a sheet for his and Robin Old's aircraft.
Who did the blue stripes belong to. Was that "Boots Belsae's " aircraft? I have decals for his A/C. That is what my next F-4 will be done in. I have a sheet for his and Robin Old's aircraft.
27 May 2017, 01:09
Choppa Nutta
I too prefer the box art classic scheme, good choice ! 🙂
Anyhow, is it me or do those wing tip sections look flat in line with the wings ? as in no dihedral ?
difficult to tell, a view from the front would be easier to see if the tip dihedral is missing 🙂
[img1]
I too prefer the box art classic scheme, good choice ! 🙂
Anyhow, is it me or do those wing tip sections look flat in line with the wings ? as in no dihedral ?
difficult to tell, a view from the front would be easier to see if the tip dihedral is missing 🙂
[img1]
27 May 2017, 08:06
Donald Dickson II
Choppa, leave it to you to catch my screw up. I will not repeat the string of expletives I let loose when I realized what I had done. Suffice it to say that being a retired firefighter I can curse with the best of sailors. And it caused my son who was just walking out of the room to turn around and just walk right back into his room and close the door.
I have had to break off the wing tips and reglue them in the proper manner. Which therefore left me with puttying work to be done. Once I complete the repairs I will post the results.
Choppa, leave it to you to catch my screw up. I will not repeat the string of expletives I let loose when I realized what I had done. Suffice it to say that being a retired firefighter I can curse with the best of sailors. And it caused my son who was just walking out of the room to turn around and just walk right back into his room and close the door.
I have had to break off the wing tips and reglue them in the proper manner. Which therefore left me with puttying work to be done. Once I complete the repairs I will post the results.
27 May 2017, 17:49
Donald Dickson II
Clifford, I think so. I will double check when I vet home later.
Clifford, I think so. I will double check when I vet home later.
27 May 2017, 17:50
Choppa Nutta
haha, well, not without standing on it first at least 😄
anyhow, I reckon you must have had a brain fart on this one dude as those wing tips are something of a characteristic feature of the Phantom haha😉
Still though an easy (if annoying) repair,
repainting the join should be ok though ?
haha, well, not without standing on it first at least 😄
anyhow, I reckon you must have had a brain fart on this one dude as those wing tips are something of a characteristic feature of the Phantom haha😉
Still though an easy (if annoying) repair,
repainting the join should be ok though ?
28 May 2017, 03:06
Donald Dickson II
We shall see. I did not get home until late tonight. I probably wont get back to it until Mon evening.
And it was beyond a brain fart. It was my brain oozing out of my ears idiocy. LOL
We shall see. I did not get home until late tonight. I probably wont get back to it until Mon evening.
And it was beyond a brain fart. It was my brain oozing out of my ears idiocy. LOL
28 May 2017, 04:05
Choppa Nutta
........"Clean up in isle three please"
haha, a brain fart with some follow through.... Medic !!!
[img1]
........"Clean up in isle three please"
haha, a brain fart with some follow through.... Medic !!!
[img1]
28 May 2017, 12:06
Donald Dickson II
Glad you all could have a laugh at my expense. The mental anguish I am suffering here...
LOL Joking of course.
Glad you all could have a laugh at my expense. The mental anguish I am suffering here...
LOL Joking of course.
28 May 2017, 13:53
Choppa Nutta
haha, I reckon we're laughing at ourselves too hey, as we've all done something as stupid 😄 😄 😄
.... at least you didn't make a mistake like this on an RC model as that can get expensive really quick.
One of my dumb mistakes cost me more than £400 in 2 seconds....
... I cried like a baby and swore like a trooper 🙂
haha, I reckon we're laughing at ourselves too hey, as we've all done something as stupid 😄 😄 😄
.... at least you didn't make a mistake like this on an RC model as that can get expensive really quick.
One of my dumb mistakes cost me more than £400 in 2 seconds....
... I cried like a baby and swore like a trooper 🙂
28 May 2017, 14:27
Kerry COX
We all suffer mate, on just about EVERY kit we build. :-9
I know I do.
As every kit I open, I always find dramas, but mostly of my own making.hahahaha
We could all write quite a thick book on our stuff-up's and stumbles, that's for sure. :-/
We all suffer mate, on just about EVERY kit we build. :-9
I know I do.
As every kit I open, I always find dramas, but mostly of my own making.hahahaha
We could all write quite a thick book on our stuff-up's and stumbles, that's for sure. :-/
28 May 2017, 21:37
Donald Dickson II
Yeah, I have managed to do a few in my time. This one was the dumbest though. LOL
And I am working on it. I may be able to make it fairly OK.
Yeah, I have managed to do a few in my time. This one was the dumbest though. LOL
And I am working on it. I may be able to make it fairly OK.
30 May 2017, 02:32
Choppa Nutta
I have every confidence 😄
what I'm wondering is how you managed it in the first place,
don't the parts have a special angle to make the join ?
or did you get the tips swapped and the join angles made them flat ?
I can't help but think you must have had a fit issue to glue them like that .....
Anyhow I'm still chuckling, nice that you can laugh about it too😉 😄
glad it aint the end of the model though, gonna be nice when complete 🙂
I have every confidence 😄
what I'm wondering is how you managed it in the first place,
don't the parts have a special angle to make the join ?
or did you get the tips swapped and the join angles made them flat ?
I can't help but think you must have had a fit issue to glue them like that .....
Anyhow I'm still chuckling, nice that you can laugh about it too😉 😄
glad it aint the end of the model though, gonna be nice when complete 🙂
30 May 2017, 03:03
Donald Dickson II
Chopra, I am thinking I got them swapped. Both sides look exactly the same and I just wasn't paying attention. Like I said, I clearly hadn't taken my brain out of the jar and put it in.
Thank you Soren.
Chopra, I am thinking I got them swapped. Both sides look exactly the same and I just wasn't paying attention. Like I said, I clearly hadn't taken my brain out of the jar and put it in.
Thank you Soren.
30 May 2017, 12:16
Choppa Nutta
"I clearly hadn't taken my brain out of the jar and put it in."
................. hahaha, oh I know that feeling lol 🙂
I'm still waiting for my upgrade unit 😄
Although I do have a backup system, the Jack Daniels V1.0 systems support unit😉
"I clearly hadn't taken my brain out of the jar and put it in."
................. hahaha, oh I know that feeling lol 🙂
I'm still waiting for my upgrade unit 😄
Although I do have a backup system, the Jack Daniels V1.0 systems support unit😉
30 May 2017, 12:48
Clifford Keesler
I hope you get it fixed, it sure is looking good. You have to watch Choppa, if you make a boo boo, he will find it. LOL. He took great pleasure in telling me I glued the canopies on my TF-104 on the wrong side. LOL. It is all in good fun. And yes we all make silly mistakes.
I hope you get it fixed, it sure is looking good. You have to watch Choppa, if you make a boo boo, he will find it. LOL. He took great pleasure in telling me I glued the canopies on my TF-104 on the wrong side. LOL. It is all in good fun. And yes we all make silly mistakes.
30 May 2017, 20:21
Choppa Nutta
Haha oh yeah, sorry about the Clifford😉 😄
anyhow, if ... sorry, when.. I next make a boo boob and I miss the cruelest thing you could do to me is not point it out, except maybe waiting until the end and then tell me haha 😄
I'm pretty sure I've got a few more decent boobs in me yet 😄 😄 😄
Haha oh yeah, sorry about the Clifford😉 😄
anyhow, if ... sorry, when.. I next make a boo boob and I miss the cruelest thing you could do to me is not point it out, except maybe waiting until the end and then tell me haha 😄
I'm pretty sure I've got a few more decent boobs in me yet 😄 😄 😄
30 May 2017, 21:03
Choppa Nutta
oh man, that last sentence of mine came out a bit wrong ........ oops
plus there is one or two missing words,
a boob straight out of the box !!
seems like a gotta box full of boobs ! 😄
oh man, that last sentence of mine came out a bit wrong ........ oops
plus there is one or two missing words,
a boob straight out of the box !!
seems like a gotta box full of boobs ! 😄
30 May 2017, 21:04
Donald Dickson II
LMAO Box full of boobs...making me worry here dude.😉
And Jack is good, RUM is better. 😄
I got the puttying done and sanded and repainted the joins. Had to sand a bit more on one, so have to touch it up again. This is NOT easy with decals already on and all that. I should have it done and pics tomorrow some time.
LMAO Box full of boobs...making me worry here dude.😉
And Jack is good, RUM is better. 😄
I got the puttying done and sanded and repainted the joins. Had to sand a bit more on one, so have to touch it up again. This is NOT easy with decals already on and all that. I should have it done and pics tomorrow some time.
31 May 2017, 04:32
Donald Dickson II
OK, so that's where I am. Still have to touch up the right wing where I had to sand more. And the weapons and tanks are not glued on yet. Just placed for the pic. I think I rescued this one from my idiocy fairly well. Wont win a major competition now, but at least not embarrassing.
OK, so that's where I am. Still have to touch up the right wing where I had to sand more. And the weapons and tanks are not glued on yet. Just placed for the pic. I think I rescued this one from my idiocy fairly well. Wont win a major competition now, but at least not embarrassing.
31 May 2017, 23:44
Donald Dickson II
Martin, LOL! I like that.
And thank you gents. I pulled my ass out of the fire on that one for sure.
So I made her all dirty. Didnt take pics of the top side, just underneath. Got the air brakes on and gear doors on one side. My back decided I was done for the evening at that point.
Martin, LOL! I like that.
And thank you gents. I pulled my ass out of the fire on that one for sure.
So I made her all dirty. Didnt take pics of the top side, just underneath. Got the air brakes on and gear doors on one side. My back decided I was done for the evening at that point.
3 June 2017, 03:24
Michael Phillips
The weathering and streaking of the underside really looks great Donald!
The weathering and streaking of the underside really looks great Donald!
3 June 2017, 04:36
Donald Dickson II
So the underside is done. I may add bombs later, but its good for now. Got the pilots seat done. I will do the back seater tomorrow and the canopies and dull coating. Pretty sure that will be it.
So the underside is done. I may add bombs later, but its good for now. Got the pilots seat done. I will do the back seater tomorrow and the canopies and dull coating. Pretty sure that will be it.
6 June 2017, 03:52
Clifford Keesler
Think it looks cool with just the sidewinders and sparrows. They did not always carry bombs. Especially when escorting the Thuds.
Think it looks cool with just the sidewinders and sparrows. They did not always carry bombs. Especially when escorting the Thuds.
6 June 2017, 21:31
Donald Dickson II
Well, she is mostly done. Enough so to call her complete. I took a pic with my 1/72 Hasegawa Phantom. I am pretty sure I will leave her without bombs. I have plenty of other kits where I can use them. 🙂
Well, she is mostly done. Enough so to call her complete. I took a pic with my 1/72 Hasegawa Phantom. I am pretty sure I will leave her without bombs. I have plenty of other kits where I can use them. 🙂
7 June 2017, 04:43
Patrick Hagelstein
Donald, I hate to be the bad messenger... the auxiliary inlet doors at the bottom should be hinged at the centerline. In that way they can be opened when the belly tank is installed.
Donald, I hate to be the bad messenger... the auxiliary inlet doors at the bottom should be hinged at the centerline. In that way they can be opened when the belly tank is installed.
7 June 2017, 17:35
Michael Phillips
LOL Donald, somehow you got a wink emoji in there randomly. You crack me up!
At least that should be an easy fix.
LOL Donald, somehow you got a wink emoji in there randomly. You crack me up!
At least that should be an easy fix.
7 June 2017, 21:01
Clifford Keesler
I can't believe Choppa missed that one. I know I did. Hang in there Donald. She still looks good.
I can't believe Choppa missed that one. I know I did. Hang in there Donald. She still looks good.
7 June 2017, 21:01
Choppa Nutta
.... lol Cliff, I think I've caused enough trauma already haha 😄
....... Ah Don, Don, Don.... I feel your pain,
especially when you express yourself so eloquently 🙂
.... lol Cliff, I think I've caused enough trauma already haha 😄
....... Ah Don, Don, Don.... I feel your pain,
especially when you express yourself so eloquently 🙂
7 June 2017, 21:34
Donald Dickson II
Hey Don, your wing tips are on wrong.
Hey Don, your inlet doors are on wrong.
Bunch of nit pickers I swear. Negative Nancys. Debbie downers. And to think I post here of my own free will. Sheesh.😉
LOL Thank you for the catch Patrick. It would have been embarrassing showing up to the meeting tonight and having the F-4 pilot (YES, we freaking have one in the club. You cant bring a Phantom when he is there with any mistakes. LOL) point it out.
Hey Don, your wing tips are on wrong.
Hey Don, your inlet doors are on wrong.
Bunch of nit pickers I swear. Negative Nancys. Debbie downers. And to think I post here of my own free will. Sheesh.😉
LOL Thank you for the catch Patrick. It would have been embarrassing showing up to the meeting tonight and having the F-4 pilot (YES, we freaking have one in the club. You cant bring a Phantom when he is there with any mistakes. LOL) point it out.
7 June 2017, 21:50
Choppa Nutta
Wahooo !!!
good on ya !
it was worth all the tears and the verbal explosions of imperfect French ! haha 😄
well done though, you gotta feel pretty chuffed at that 👍 🙂
As for -
"I did! Mostly. Kind of. For the most part..." you mean "eventually" surely haha 😄
Wahooo !!!
good on ya !
it was worth all the tears and the verbal explosions of imperfect French ! haha 😄
well done though, you gotta feel pretty chuffed at that 👍 🙂
As for -
"I did! Mostly. Kind of. For the most part..." you mean "eventually" surely haha 😄
8 June 2017, 12:01
Donald Dickson II
As you would say Choppa, cheers mate. 🙂
Even given my screw-ups it turned out really really well. I can only imagine how nice it would look if I hadn't screwed things up. I'm still going to add remove before flight tags and get a PSP base for it and use the wheel chocks I have. And then it will be 100% complete.
As you would say Choppa, cheers mate. 🙂
Even given my screw-ups it turned out really really well. I can only imagine how nice it would look if I hadn't screwed things up. I'm still going to add remove before flight tags and get a PSP base for it and use the wheel chocks I have. And then it will be 100% complete.
8 June 2017, 16:08
Choppa Nutta
..... "I can only imagine how nice it would look if I hadn't screwed things up"
.............................. it would look 0.1% better😉 😄 😄 😄
..... "I can only imagine how nice it would look if I hadn't screwed things up"
.............................. it would look 0.1% better😉 😄 😄 😄
8 June 2017, 17:37
Clifford Keesler
I hope the rest of it goes well. LOL. I was cleaning out a tray on my work bench today and found the right tip tank to my Canberra in it. I knocked it off at some point and did not even notice it. Hope it was there when I took the pictures or Choppa, will never let me live that one down. It is a good thing that we can tease each other about our mistakes, and not get all bent out of shape about it.
I hope the rest of it goes well. LOL. I was cleaning out a tray on my work bench today and found the right tip tank to my Canberra in it. I knocked it off at some point and did not even notice it. Hope it was there when I took the pictures or Choppa, will never let me live that one down. It is a good thing that we can tease each other about our mistakes, and not get all bent out of shape about it.
8 June 2017, 23:08
Clifford Keesler
I did take the pictures with the missing tip tank. AAAAAARRRRRRRGGGGG!!.
I did take the pictures with the missing tip tank. AAAAAARRRRRRRGGGGG!!.
8 June 2017, 23:21
Choppa Nutta
Hey Don, I found this, something I've not watched before but quite cool 🙂
Youtube Video
Hey Don, I found this, something I've not watched before but quite cool 🙂
Youtube Video
30 June 2017, 11:42
Donald Dickson II
I will sit down and watch that after this weekend. I am moving, so don't have time for it. But thank you sir! I am sure I will enjoy it.
I will sit down and watch that after this weekend. I am moving, so don't have time for it. But thank you sir! I am sure I will enjoy it.
30 June 2017, 13:55
Choppa Nutta
Yeah, it is a good video, I like the way they showed all the various surfaces in operation, air brakes, flaps, the wing tip folding and a look at the tip root etc. plus a lot of them looked like Nam Phantoms 😄
Yeah, it is a good video, I like the way they showed all the various surfaces in operation, air brakes, flaps, the wing tip folding and a look at the tip root etc. plus a lot of them looked like Nam Phantoms 😄
30 June 2017, 19:30
Spanjaard
yes, i was looking for pictures of how the flaps and slats were for my Black bunny, true it is a J model, but the movie has a very good shot of what i was looking for. well, it seems i did not do it that bad after all 😄
yes, i was looking for pictures of how the flaps and slats were for my Black bunny, true it is a J model, but the movie has a very good shot of what i was looking for. well, it seems i did not do it that bad after all 😄
30 June 2017, 19:34
Donald Dickson II
Thank you All!
Yes, I am moving to America. LOL From Virginia to Pennsylvania. It's only about an hour and a half move.
Thank you All!
Yes, I am moving to America. LOL From Virginia to Pennsylvania. It's only about an hour and a half move.
1 July 2017, 23:48
Patrick Hagelstein
Well, I'm moving to America too! From Gulpen in the Netherlands to Oklahoma-City. It's only 16 and a half hours apart. 😉
Well, I'm moving to America too! From Gulpen in the Netherlands to Oklahoma-City. It's only 16 and a half hours apart. 😉
2 July 2017, 00:01
Michael Phillips
Oh really? So cool. Oklahoma City is not close to me, but it's cool that you are moving to the States. We should have a big Scalemates meet someday somewhere...
Oh really? So cool. Oklahoma City is not close to me, but it's cool that you are moving to the States. We should have a big Scalemates meet someday somewhere...
2 July 2017, 00:03
Patrick Hagelstein
I will be there for work for the next three years. Part of my stash is on it's way already. I'm eager to continue building again.
I will be there for work for the next three years. Part of my stash is on it's way already. I'm eager to continue building again.
2 July 2017, 00:06
Choppa Nutta
ROFL 🙂
I'm moving too !! .... from the living room to the bathroom,
my movements are about 16 and a half hours apart too😉 😄 😄 😄
ROFL 🙂
I'm moving too !! .... from the living room to the bathroom,
my movements are about 16 and a half hours apart too😉 😄 😄 😄
2 July 2017, 01:00
Clifford Keesler
I agree we should. I live near ST. Louis Mo. Wood River IL. actually, but is just across the river from STL. I have 2 friends that live in OK. City.
I agree we should. I live near ST. Louis Mo. Wood River IL. actually, but is just across the river from STL. I have 2 friends that live in OK. City.
2 July 2017, 01:18
Bryn Crandell
Patrick there is a good hobby shop up near Tulsa. Top Shelf Hobbies in Owasso, OK. A couple hours from OKC. Otherwise, I am six hours away form OKC.
Patrick there is a good hobby shop up near Tulsa. Top Shelf Hobbies in Owasso, OK. A couple hours from OKC. Otherwise, I am six hours away form OKC.
4 July 2017, 16:00
Patrick Hagelstein
Thanks Bryn! I was already searching the internet to find something. Momentarily I live very close to the German border near Aix-la-Chapel where a very good hobby shop is. Next Monday I will be flying in. When I'm sorted out I will look into that Tulsa shop!
Thanks Bryn! I was already searching the internet to find something. Momentarily I live very close to the German border near Aix-la-Chapel where a very good hobby shop is. Next Monday I will be flying in. When I'm sorted out I will look into that Tulsa shop!
4 July 2017, 16:33
Michael Phillips
I don't know about that particular chapter, but I joined a local IPMS chapter (IPMS John Glenn Cleveland) and really enjoy it. I would think it would be a similar experience there too. 🙂
I don't know about that particular chapter, but I joined a local IPMS chapter (IPMS John Glenn Cleveland) and really enjoy it. I would think it would be a similar experience there too. 🙂
4 July 2017, 16:46
Donald Dickson II
The NOVA IPMS chapter is awesome. If the OKC one is the same, you will love it.
The NOVA IPMS chapter is awesome. If the OKC one is the same, you will love it.
6 July 2017, 01:42
Patrick Hagelstein
Thanks for the encouragement guys! After next week I will know for sure. 🙂
Thanks for the encouragement guys! After next week I will know for sure. 🙂
6 July 2017, 08:39