Russian 1S91 SURN Kub Radar

Trumpeter | No. 09571 | 1:35

Boxart 1S91 SURN Kub Radar 09571 Trumpeter

Fatos

Marca:: Trumpeter
Título:: Russian 1S91 SURN Kub Radar
Número:: 09571
Escala:: 1:35
Tipo:: Kit completo
Lançado:: 2019 Produto novo
Código de barras:: 9580208095714 (EAN)
Embalagem:: Caixa rígida (abertura pelo topo)
Tópico:: 2K12 Kub » Artilharia autopropelida (Veículos)

Contents 1S91 SURN Kub Radar 09571 Trumpeter

Conteúdo

Dimensões:
450x290x80 mm (17.7x11.4x3.1 inch)

Peso:
760 g (1.68 lbs)

Linha do tempo do produto

Trumpeter

2019

Produto novo

História completa »

Instruções

Download 16604Kb (.pdf)

Mercado

Lojas online

Mostrar todas as ofertas » (19 no total)

Comércio privado e troca

EUR 70.00

Contatar vendedor

Nota: Preços e disponibilidade são apenas indicações. Verifique se o produto realmente corresponde à entrada!

Produtos relacionados

SAM-6 KUB/BUK/TOR & ZSU-23 Shilka

Friulmodel 1:35

ATL-103 Tópico múltiplo (2)

SA-6 Hungarian, Czech, Slovak

HADmodels 1:35

035013 (HJ35013)

SAM-6 2K12 Kub | SA-6 "Gainful" lights and periscopes

FC Model Trend 1:35

37022 2022 Produto novo

Avaliações

Revisões externas

Link quebrado David's Modellbaukeller

Galeria

SA-6 Gainful

Trumpeter 1:35

por Uwe Schumacher em Modellversium

SA-6 Gainful

Trumpeter 1:35

por warlock-far-east em scalemodels.ru

Todos os artigos » (11 no total)

Comentários

Vesa-Pekka Palmu
The kit is pretty good, but there are ejector pin marks that need to be dealt with, and some of them are in annoying places to clean. The tracks are link-and-length and also have pretty deep ejector pin marks, on each individual link and few on each length piece, would recommend getting the SA-6 Kub tracks as an aftermarket part.

1 6 November 2021, 09:56

Vesa-Pekka Palmu
And now that I remember I also ran into some fit issues with the hatches on the hull and had to do some slight modifications to one hatch and PE hinges to get them to fit.

6 November 2021, 10:00

Vesa-Pekka Palmu
So check the fit of all hatches before gluing any of them in place.

6 November 2021, 10:00

Treehugger
Pin ejector marks, may be easily fixed, by the following method, which is my favourite: Use Vallejo putty in a hole, then top it like soft ice cream (so that it sticks upwards cancelling any shrinking of the putty as it dries). Wait some time, then use a blade to cut the top flush with the surface, or close enough, then let it dry some more, then maybe sand the surface clean (then the putty should have gone hard after some hours, or a day).

6 November 2021, 11:12

Material de referência

SA-6 Gainful Launcher and Radar Vehicles

Present Vehicle Line No. G 046

Jan Horak, Frantisek Koran

2016

SA-6 Gainful in detail Soviet Anti-aircraft Mobile Rocket System

Present Vehicle Line No. G 015

František Korán, Tomáš Bouchal, Jan Horák

Todos os <em>walkarounds</em> » (6 no total)