Baby Dragon
Komentarzy
33 25 March, 14:15
Robert Podkoński
Welcome, Mates! @Juergen - I use cyanoacrylate glue (thin or thick - depending on the joint) and two-part automotive finishing putty for more demanding job (bigger gaps, blending the parts together, etc.)
Welcome, Mates! @Juergen - I use cyanoacrylate glue (thin or thick - depending on the joint) and two-part automotive finishing putty for more demanding job (bigger gaps, blending the parts together, etc.)
26 March, 18:32
Juergen Klinglhuber
Thx Robert for your feedback. Have a quite big plane moving towards the bench and was not sure if superglue will to an adequate job for this giant as well (a Combat 1/72 BAe 146 - there is quite a pile of resin in the box). regards
Thx Robert for your feedback. Have a quite big plane moving towards the bench and was not sure if superglue will to an adequate job for this giant as well (a Combat 1/72 BAe 146 - there is quite a pile of resin in the box). regards
27 March, 08:36
Robert Podkoński
My pleasure, Juergen 🙂 I all cases I am not sure if the joint will be strong enough I just drill holes in corresponding parts and insert pieces of wire.
My pleasure, Juergen 🙂 I all cases I am not sure if the joint will be strong enough I just drill holes in corresponding parts and insert pieces of wire.
27 March, 08:43
Ludvík Kružík
Robert, once again you have chosen an interesting aircraft. I'll be happy to watch the progress of the build. 👀
Robert, once again you have chosen an interesting aircraft. I'll be happy to watch the progress of the build. 👀
27 March, 11:19
gorby
I didn't know about this tiny aircraft. Very interesting.
Keep up the good work Robert, it's looking great.
I didn't know about this tiny aircraft. Very interesting.
Keep up the good work Robert, it's looking great.
26 April, 06:29
Ludvík Kružík
The little dragon grows into beauty. 👍 I'm very curious to see what it will look like when it gets the "metallic" finish.
What colors do you use for MNF?
The little dragon grows into beauty. 👍 I'm very curious to see what it will look like when it gets the "metallic" finish.
What colors do you use for MNF?
26 April, 10:18
Robert Podkoński
I use AK Xtreme Metal, Ludviku - my favourite ones. But first I masked some panels leaving them black and used Tamiya X-11 'Silver leaf' as a 'second' primer. In the end it gives the effect I like: depending on the light and the angle the NMF looks uniform or some panels look darker.
I use AK Xtreme Metal, Ludviku - my favourite ones. But first I masked some panels leaving them black and used Tamiya X-11 'Silver leaf' as a 'second' primer. In the end it gives the effect I like: depending on the light and the angle the NMF looks uniform or some panels look darker.
26 April, 10:24
Ludvík Kružík
Robert, thank you for your reply. I have built a few aircraft with MNF finish in the past, but that was back when I used a brush or fine sponge to apply paint.
Now I have several MNF projects planned where I want to spray paint, so I'm interested in other modelers' experiences.
If I understand your process correctly, did you use Tamiiya X11 only on some panels and then completely repaint the entire surface with AK Xtreme metal? If so, I'm surprised that you achieved the effect of a different panel colour shade with this procedure. In my experience, metallic paints cover very well from a thin layer of paint onwards and reliably cover preshading, even when done with dark paint.
Robert, thank you for your reply. I have built a few aircraft with MNF finish in the past, but that was back when I used a brush or fine sponge to apply paint.
Now I have several MNF projects planned where I want to spray paint, so I'm interested in other modelers' experiences.
If I understand your process correctly, did you use Tamiiya X11 only on some panels and then completely repaint the entire surface with AK Xtreme metal? If so, I'm surprised that you achieved the effect of a different panel colour shade with this procedure. In my experience, metallic paints cover very well from a thin layer of paint onwards and reliably cover preshading, even when done with dark paint.
26 April, 12:24
Robert Podkoński
That's exactly the way I do my "preshading", Ludviku. And it works with AK Xtreme metal paints - they are ready to use with an airbrush and can be laid in very thin layers. (Please take a look at my Sanger bomber: Silverbird | Album by podkon (1:72)) The effect is very delicate, and the only issue with these paints is that they can be easily scratched.
That's exactly the way I do my "preshading", Ludviku. And it works with AK Xtreme metal paints - they are ready to use with an airbrush and can be laid in very thin layers. (Please take a look at my Sanger bomber: Silverbird | Album by podkon (1:72)) The effect is very delicate, and the only issue with these paints is that they can be easily scratched.
26 April, 14:42
Ludvík Kružík
Robert, I confess that I have minimal experience with MNF surface spraying. I was basing it on the properties of metallic polishable paints. These paints reliably hide the overshadowing.
The photos of your Silverbird are very convincing. I'm glad I learned something new. 😉
Robert, I confess that I have minimal experience with MNF surface spraying. I was basing it on the properties of metallic polishable paints. These paints reliably hide the overshadowing.
The photos of your Silverbird are very convincing. I'm glad I learned something new. 😉
27 April, 11:59
Ben M
I've found that if I spray some panels with gloss black primer and others with flat grey primer and do NMF over it, I get contrasts between panels as well.
I've found that if I spray some panels with gloss black primer and others with flat grey primer and do NMF over it, I get contrasts between panels as well.
27 April, 16:58
Robert Podkoński
That's right, Ben - I used such primers too (on Me 209, for example), but with Tamiya X-11 you can use thinner layers of metallic paints (as long as you do not use copper or gold 😉
That's right, Ben - I used such primers too (on Me 209, for example), but with Tamiya X-11 you can use thinner layers of metallic paints (as long as you do not use copper or gold 😉
27 April, 17:49
Album info
Saab 210 was the 2/3rds scale proof of concept of the double delta configuration planned for a future J35 jet fighter. First configuration of the airframe with short 'nose' between intakes.