Blade Runner Spinner Fujimi 1/24
Komentarzy
29 8 January 2022, 17:16
Steve Cassidy
Yep I'm gonna enjoy this build and it will certainly be a challenge to light it. I usually control my lighted models with the Inner Light solution from Scalectronics. However, that solution does not allow control of nano SMDs. So for this build I'm gonna have to go for a simpler approach.
Yep I'm gonna enjoy this build and it will certainly be a challenge to light it. I usually control my lighted models with the Inner Light solution from Scalectronics. However, that solution does not allow control of nano SMDs. So for this build I'm gonna have to go for a simpler approach.
11 January 2022, 08:58
JD
Great idea on using colors on a clear strip of acetate to achieve a variety of colors on the consoles!👏 I've been experimenting with a similar idea..
Great idea on using colors on a clear strip of acetate to achieve a variety of colors on the consoles!👏 I've been experimenting with a similar idea..
12 January 2022, 21:20
Steve Cassidy
Just playing with the Nano SMDs for the 'blinky' lights - here's the test Youtube Video
Just playing with the Nano SMDs for the 'blinky' lights - here's the test Youtube Video
17 January 2022, 18:49
JD
I'm curious about how you did the console graphics. Did you make them yourself?
I'm curious about how you did the console graphics. Did you make them yourself?
19 January 2022, 20:11
Steve Cassidy
Hi guys thanks for the comments. JD, the console graphics backing film is included in the Paragrafix photoetch kit. Other backlit colours I've created using the clear film with painted areas technique. Gotta say I'm surprised by how many SMDs I'm having to use - I didn't realise how much of this needed lighting.
Hi guys thanks for the comments. JD, the console graphics backing film is included in the Paragrafix photoetch kit. Other backlit colours I've created using the clear film with painted areas technique. Gotta say I'm surprised by how many SMDs I'm having to use - I didn't realise how much of this needed lighting.
20 January 2022, 11:02
Steve Cassidy
Here's another video - this time I'm testing the blinky lights/gumballs or the underneath of the car Youtube Video
Here's another video - this time I'm testing the blinky lights/gumballs or the underneath of the car Youtube Video
26 January 2022, 18:54
Steve Cassidy
I've now wired up the full set of Blade Runner Spinner roof blinky (gumball) nano SMD lights. As I'm not using any micro-controllers I've just used a mix of steady and different flash rate SMDs.
Youtube Video
I've now wired up the full set of Blade Runner Spinner roof blinky (gumball) nano SMD lights. As I'm not using any micro-controllers I've just used a mix of steady and different flash rate SMDs.
Youtube Video
27 January 2022, 12:08
Steve Cassidy
I've now installed and wired up nano SMDs into the cockpit of the car. The backlit films on the main diver consoles are included as part of the aftermarket Paragrafix photoetch set for the 1/24 scale Fujimi kit. The center console is backlit with one cool white nano SMD and I've added clear film with coloured areas to give the effect of different coloured lights/buttons.
Youtube Video
I've now installed and wired up nano SMDs into the cockpit of the car. The backlit films on the main diver consoles are included as part of the aftermarket Paragrafix photoetch set for the 1/24 scale Fujimi kit. The center console is backlit with one cool white nano SMD and I've added clear film with coloured areas to give the effect of different coloured lights/buttons.
Youtube Video
27 January 2022, 12:28
Steve Cassidy
Here's another video showing the cockpit a little more finished Youtube Video
Here's another video showing the cockpit a little more finished Youtube Video
30 January 2022, 17:48
Steve Cassidy
Here's my near completed Spinner. Just the canopy and foot well glass to install and some touch up, minor weathering and gloss/satin coat sealing - Youtube Video
Here's my near completed Spinner. Just the canopy and foot well glass to install and some touch up, minor weathering and gloss/satin coat sealing - Youtube Video
13 February 2022, 12:40
Steve Cassidy
"I've seen things you people wouldn't believe..."
Hi all, here's my pretty much complete Blade Runner Spinner Flying cop car. This is a daylight video with part II being a night time video.
I really enjoyed this build and the challenge of squeezing all the nano SMDs in. I thought the car would look best flying 😉 so I've made a custom base and flexible mount to display it. Some minor touch-up and decal repair, but pretty much done. Shout if you have any questions on this build.
Youtube Video
"I've seen things you people wouldn't believe..."
Hi all, here's my pretty much complete Blade Runner Spinner Flying cop car. This is a daylight video with part II being a night time video.
I really enjoyed this build and the challenge of squeezing all the nano SMDs in. I thought the car would look best flying 😉 so I've made a custom base and flexible mount to display it. Some minor touch-up and decal repair, but pretty much done. Shout if you have any questions on this build.
Youtube Video
20 February 2022, 15:56
Steve Cassidy
Here's the night time video showing the lights working Youtube Video
Here's the night time video showing the lights working Youtube Video
20 February 2022, 16:11
JD
Absolutely outstanding! 🤘🤩🤘 A very inspirational build. It's been enjoyable to watch, and although I would like to see many more shots of how you did certain things, it's been an awesome ride. 👏
Absolutely outstanding! 🤘🤩🤘 A very inspirational build. It's been enjoyable to watch, and although I would like to see many more shots of how you did certain things, it's been an awesome ride. 👏
21 February 2022, 00:42
Album info
Building the iconic cop car from Blade Runner with full working lights and detailed photoetch parts from Paragrafix.