T-90M Scratch/Zvezda

T-90M proving ground version. The workshop takes a while, so in short ???? what has changed compared to the Zvezda base.


Changes:

- changed wheels specific to the T-90M - stock from the Tiger Model kit
- correct entrenching blade - scratch
- non-slip coating on the body and turret
- complete electrical wiring on the body and turret
- correct wire light covers
- marker lights details (front / rear)
- missing bolts (charge cassette closures) added to the reactive armor of the body
- improved fenders. Geometry, anti-skid plates, fastening buckles, bolts.
- a ring around the basket of the turret has been added higher than in the T-90MC
- added buckles for containers (Microdisign from the set dedicated to MS)
- replacement tank holders (wire)
- enlarged right rear fuel tank - compatible with the T-90M version. In addition, improved location of the fuel fillers and grooves in the tanks
- side skirts bolts replaced, wire handles added, geometry of the front side skirts changed (reactive armor elements and rubber skirts)
- right rear fender made of metal + bolts
- engine compartment air filter mesh (Microdisign from the MS kit)
- details of the rear part of the body (Microdisign from the kit dedicated to MS), slat (Microdisign from the kit dedicated to T-72B3M mod. 2016) required some elements to be corrected (length, spacing of fixings and their type), but overall it was ok
- APU made from scratch
- made appropriate for the T-90M, oil container with a cover, filler and bolts
- reversing camera made with all wires
- electrical connector cover replaced (right rear)
- welds added wherever possible
- slat plus turret basket (Microdisign from the set dedicated to MS), wire frame
- the air conditioner changed to be compatible with the T-90M version (Tiger Model / Zvezda), the filter cover was made of sheet metal, Mikrodisign buckles added
- Reactive side turret armor made of polystyrene and sheet metal, similar to the turret containers, and the turret front covers
- anticumulative net of the turret from the Rosomak IBG set
- Kord (AA gun) turret made from scratch - metal plate, Kord hybrid LiveResin / Zvezda
- commander's hatch made from scratch
- improved top turret reactive armor - added bottom layer (wire) under each element
- most part / detail dividing lines corrected. Some of them were completely separated by details.
- periscopes - dvd disc painted with a white frame
- gunner and commander optics (Microdisign from the MS kit). Changed gunner optics door, replaced bolts.
- complete electrical wiring on turret
- turret bolts replaced
- replaced handles of the turret ammo compartment
- GPS / Glonass antenna mounting socket changed- made from scratch. The antenna itself is a Voyager kit
- main antenna from needles. Antenna socket made from scratch.
- laser beam sensors details corrected, replaced bolts
- wind sensor detail improved, wires + bolts, cable protection covers added
- Voyager barrel for T-90MC - required a few modifications and correct bolts
- Masterclub tracks for the T-14 Armata
- EurekaXXL towing lines



I don't remember any more sins 🙂 Enjoy



Painting, as I wrote, on a proving ground.

- AmmoMig 0053

- oil paint

- AK, Vallejo and Ammo pigments

- AK, AmmoMIG, Tamiya wash

You can also follow this project here: modelwork.pl/topic/40979-135-t-90m/