Panzerkampfwagen Mk IV, (A13)
Bronco

The Cruiser tank Mk IV (A13 Mk II) was a British cruiser tank of the Second World War. It followed directly on from the Tank, Cruiser, Mk III (A13 Mk I). The first Mk IVs were Mk IIIs with extra armour fitted to the turret. Later Mk IVAs were built with the complete extra armour. The tank was used in France in 1940 and in the early part of the war in North Africa, before being withdrawn from service.
The A13E2 was built to mount the turret of the Vickers designed Cruiser Tank MkI (A9). This carried a 40 mm Ordnance QF 2-pounder gun and a co-axial .303 water-cooled Vickers machine gun. The drive train was also revised, with the road wheels no longer powered so the tank could not be driven on its wheels alone. Better tracks were used, with rear-mounted drive sprockets and in trials, over 40 miles per hour (64 km/h) was attained on them but later the speed was governed to 30 miles per hour (48 km/h). The armour of the A13E2 was 15 millimetres (0.59 in), in line with other pre-war fast tank designs.

The A13E3 was the final trials model, which led to the production tank, A13 MkI, Cruiser Tank Mk III, which entered production in 1939 at Nuffield Mechanization & Aero Limited, a munitions subsidiary of Morris Motors. An order for 65 tanks was placed and at least 30 tanks completed when the War Office decided to build a new model with thicker armour. The A13 MkII, Cruiser Tank Mk IV, had a maximum armour thickness of 30 millimetres (1.2 in) and faceted armour was mounted on the original turret sides and rear. This gave the tank a far more modern appearance; some Mk III tanks were re-built to Mk IV standard while at the factory.

The .303 Vickers machine gun gave constant trouble and was replaced by the 7.92 mm BESA. All British tanks were to have their designs modified to mount the new weapon from early 1940. This led to the main production version, the A13 MkIIA, Cruiser Tank MkIVA. A few examples were sent with the BEF to France, along with most of the earlier A13s. It is not known how many A13 MkIVA tanks were built - the numbers depending on the source. Between the Cruiser Mark III and Cruiser Mark IV, 665 had been built when production ended in 1941. English Electric, Leyland and LMS Railway were also involved in A13 production.

In France, the A13 did not do well, due to poor crew training as a result of its being rushed into service. Many tanks shipped to France were in poor condition and some were so new that they had vital parts missing. The A13 performed much better in the deserts of North Africa and coped with the conditions better than some other designs. It was fast, adequately armed and armoured against Italian and German tanks. It remained an effective weapon until late 1941, when newer models of the Panzer III and Panzer IV appeared with thicker armour and larger guns. In North Africa, it was the anti-tank gun that claimed the vast majority of British tanks lost in battle; German tanks accounted for few British losses, contrary to popular belief.