WiP
![Album image #1 Album image #1](/albums/img/9/6/3/483963-33651-80-720.jpg)
I used thinned carpenters glue to get some pe parts into position and then secured them with CA glue on the edges. Instrument panel parts where "glued" toghether using floor polish.
![Album image #2 Album image #2](/albums/img/9/6/4/483964-33651-57-720.jpg)
Wheelbays painted h08 silver for some contrast with the outer Nmf.
![Album image #3 Album image #3](/albums/img/9/6/5/483965-33651-67-720.jpg)
Inlet cone waiting patiently for the nose weight.
![Album image #4 Album image #4](/albums/img/4/3/8/486438-33651-33-720.jpg)
Sanded and painted.
![Album image #5 Album image #5](/albums/img/4/3/9/486439-33651-19-720.jpg)
Testing the buffing metalizer and aluminium foil. You can see through the paint in some spots so ill apply a thicker layer on the model. Id adheres very well to the bare plastic tho. Ill do some tests with masking tape before takling the lightning.
![Album image #6 Album image #6](/albums/img/4/4/0/486440-33651-84-720.jpg)
Metalizer after buffing.
![Album image #7 Album image #7](/albums/img/4/4/1/486441-33651-20-720.jpg)
Metalizer after masking with tape. Its a bit duller but no chipping!
![Album image #8 Album image #8](/albums/img/4/4/4/486444-33651-38-720.jpg)
Foil strip on the exhaust. Im surprised how easy this is on this small rounded piece. I used the round blunt tip of a popsicle stick to smooth out wrinkles.
![Album image #9 Album image #9](/albums/img/6/2/5/486625-33651-89-720.jpg)
Jet exhaust finished. H08 silver base, warm grey ink + floor polish wash.
Kommentarer
18 June 2018, 23:42