Bulgarian Prime Movers during WWII:Fiat TL.37 with 75 mm. Schneider-Canet M1904 Field Gun

1
April 18, 2018
Test line-up of gun, gun portee and tractor
2
April 14, 2018
Weathering applied
3
April 14, 2018
Weathering applied
4
April 14, 2018
The gun on the one axle trailer
5
April 14, 2018
One axle trailer
6
April 12, 2018
Basecollor
7
April 9, 2018
Gun almost ready
8
April 9, 2018
Gun almost ready
9
April 9, 2018
Gun almost ready
10
April 7, 2018
Elevation and traverse wheels ready
11
April 7, 2018
Shield on
12
April 7, 2018
Frontal view
13
April 6, 2018
Test fit of wheels
14
April 6, 2018
Test fit of wheels
15
April 2, 2018
Test fit
16
April 2, 2018
Elevation and traverse mechanism
17
April 2, 2018
Elevation andf traverse mechanisms in gun cradle
18
April 2, 2018
Elevation gear on barrel
19
March 31, 2018
Proportions check
20
March 31, 2018
Proportions check
21
March 31, 2018
Proportions check
22
March 25, 2018
Schneider-Canet Barrel and Lock
23
March 25, 2018
Schneider-Canet Barrel
24
March 25, 2018
Scetch of barrel dimensions
25
March 21, 2018
Fiat TL.37 in Sofia
26
March 17, 2018
75 mm Schneider-Canet Field Gun M1904 at Musina memorial,Veliko Tarnovo County.Wheels are not original-they seem to come from either Soviet 152 mm ML-20 howitzer or Soviet 122 mm A-19 gun.
27
March 17, 2018

Kommentarer

17 March 2018, 08:41

Alec K
Looks great Angel. Following 👍

25 March 2018, 12:28

Angel Yovtshev
Thanks Alec!Next week I plan to take carriage meassurements 😉

25 March 2018, 17:34

Alec K
Sweet. It looks like the historical specimens are not in the best of environs to secure their long-term survival. On the other hand, getting close to take measurements should be a snap 😉 👍

26 March 2018, 00:11

Rui S
Hello, Angel,
Nice, A new unusual subject, as always. 👍
I'm IN 😎

31 March 2018, 22:57

Angel Yovtshev
Thanks Rui!

2 April 2018, 05:12

Olivier
Once again an interesting couple...

9 April 2018, 16:58

Angel Yovtshev
It is troika actually-the gun, an one axle trailer(something like Sd.Anh.3, but domestic design) and the tractor 🙂
Thanks, Olly!

9 April 2018, 17:24

Rui S
It's is coming out, beautiful as usual 👍

9 April 2018, 18:57

Angel Yovtshev
Thanks Rui!

10 April 2018, 04:58

Alec K
Wow, just excellent scratchbuilding Angel. The elevation wheels... did you make those?

11 April 2018, 11:21

Angel Yovtshev
Yep!
0,01 mm copper sheet(cut like cross to form the struts) and 0,6 mm copper wire( soldered on both ends to form the wheel, then pressed sideways in a vise). Both parts joined by soldering.
Thanks Alec K!

11 April 2018, 13:17

Angel Yovtshev
0,1 mm copper sheet actually...

11 April 2018, 16:45

Alec K
Thanks for the info Angel. I admire your crafting skills, simply excellent. Thanks for sharing your builds on Scalemates 👍

12 April 2018, 11:53

Angel Yovtshev
Thanks Alec K!

13 April 2018, 11:48