Grumman A-6A Intruder
Trumpeter | Nr. 01640 | 1:72
Feiten
- Merk:
- Trumpeter
- Titel:
- Grumman A-6A Intruder
- Nummer:
- 01640
- Schaal:
- 1:72
- Type:
- Volledig model
- Uitgegeven:
- 2023 Nieuwe mallen
- Barcode:
- 9580208016405 (EAN)
- Verpakking:
- Stijve doos (Topopener)
- Onderwerp:
- Grumman A-6 Intruder » Straalvliegtuigen (Vliegtuigen)
Markeringen
Grumman A-6 Intruder
Grumman A-6A Intruder
US Navy (1794-now)
- VA-145 Swordsmen NE-507 | 155717
Januari 1973 Vietnam War - USS Ranger (CV-61)
FS36440 FS37875 FS14187 - VA-196 Main Battery NK-402 | 154147
1968 Vietnam War - USS Constellation (CV-64)
FS36440 FS37875 FS11136
Inhoud van de doos
Plastic Gietraam (Clear), Plastic Gietraam, Vel met natte transfers
Afmetingen:
360x240x80 mm
(14.2x9.4x3.1 inch)
Product tijdlijn
Trumpeter
Handleidingen
Download 4596Kb (.pdf)
Marktplaats
Online winkels
USD 10.28
Op voorraad »USD 36.99
Op voorraad »USD 38.21
Op voorraad »€ 24.97
USD 27.80Op voorraad »€ 27.95
USD 31.12Op voorraad »€ 29.50
USD 32.85Op voorraad »Toon alle aanbiedingen » (13 in totaal)
Alternatieve SKU's voor Trumpeter 01640:
TU01640 | TRU01640 | TRMP-01640 | TRUM01640 | TR01640 | TRP1640
Notitie: Prijzen en beschikbaarheid alleen ter indicatie, controleer of het product daadwerkelijk overeenkomt.
Verwante producten
Intruders From The Beach USMC A-6A Intruders in the Vietnam War
AOA decals 1:72
72-001 2015 Nieuwe mallen Alle gerelateerde producten » (54 in totaal)
In-box reviews
Externe reviews
Advertentie
Recensie Mojo Rising Modelling
Recensie RW Hobbies
Tijdschriften
Opmerkingen
SRW
The forward main landing gear doors and compartment are missing! Some kit of the year!
The forward main landing gear doors and compartment are missing! Some kit of the year!
All comments (8) » 4 12 February, 17:32
Oleg Bogolei
yes, but they made a flat wall between front and rear section, so it is impossible to modify to make it looks more or less real, only cut and make a absolutely new bay
yes, but they made a flat wall between front and rear section, so it is impossible to modify to make it looks more or less real, only cut and make a absolutely new bay
1 April, 11:11
Casey Beckett
Great new kit, a few wee issues - scales out darn near perfectly.
Seen several reviews complaining about fin cap shape - it is darn near spot-on. I worked on A-6s for over ten years, know this airframe intimately.
Couple small things I've caught as I contemplate my build -
- Big complaint from many, but not quite correct - some A-6A WERE IN fact retrofitted with MB GRU-7 seats, so this should not be a huge issue - anyone doesn't believe you, get this book - Intruder: The Operational History of Grumman's A-6 by Mark Morgan
- the 'slime lights' on the wing tips and fuselage above and forward of the speed brakes are wrong for an A-6A. A-6A did have a small formation light on the fuselage.
- Pitot tube is far too thick and too long
- 'v' shaped tabs on rear of radome are far too thick, in real life this very thin steel straps
- A-6A had one anti collision beacon on the nose door, not one one each intake belly as the kit has. So; one, not three as the kit has.
- Cockpit got the B/N lower and to the rear of the pilot pretty well.
-Instrument panel as molded would be a great depiction of a KA-6D tanker for starters, as the B/N had very little in front of him.
-Engine face is way too far forward - real aircraft the fan face was almost below the main wing root leading edge.
- Canopy is crystal clear and I think nailed the slight 'bulge' of each side of the canopy.
- several small vents are wrong for the -A, but correct for an -E or Tram model.
I won't complain about ordnance, they do all look pretty sketchy! (Fuel tanks look ok)
Overall, I am very happy to have a new mold, and will be getting the Tram version too
Great new kit, a few wee issues - scales out darn near perfectly.
Seen several reviews complaining about fin cap shape - it is darn near spot-on. I worked on A-6s for over ten years, know this airframe intimately.
Couple small things I've caught as I contemplate my build -
- Big complaint from many, but not quite correct - some A-6A WERE IN fact retrofitted with MB GRU-7 seats, so this should not be a huge issue - anyone doesn't believe you, get this book - Intruder: The Operational History of Grumman's A-6 by Mark Morgan
- the 'slime lights' on the wing tips and fuselage above and forward of the speed brakes are wrong for an A-6A. A-6A did have a small formation light on the fuselage.
- Pitot tube is far too thick and too long
- 'v' shaped tabs on rear of radome are far too thick, in real life this very thin steel straps
- A-6A had one anti collision beacon on the nose door, not one one each intake belly as the kit has. So; one, not three as the kit has.
- Cockpit got the B/N lower and to the rear of the pilot pretty well.
-Instrument panel as molded would be a great depiction of a KA-6D tanker for starters, as the B/N had very little in front of him.
-Engine face is way too far forward - real aircraft the fan face was almost below the main wing root leading edge.
- Canopy is crystal clear and I think nailed the slight 'bulge' of each side of the canopy.
- several small vents are wrong for the -A, but correct for an -E or Tram model.
I won't complain about ordnance, they do all look pretty sketchy! (Fuel tanks look ok)
Overall, I am very happy to have a new mold, and will be getting the Tram version too
3 17 March, 02:28
Referentiemateriaal
A-6 Intruder In U. S. Marine Corps Service and Navy Test & Evaluation Squ...
Colors & Markings Series Nr. 7
Rock Roszak, Mike Heideman
2023 Alle boeken » (26 in totaal) Alle walkarounds » (15 in totaal)