ウォール

John Mulhall
Excellent work Vassilis. Please share some more information about the marker you used to get such a great result.

Vassilis Chronopoulos 著者
Thank you John for your kind words.
Actually I found this technique on Youtube here is the link: Youtube Video
So, as you can see in the video, the marker is the Montana ACRYLIC EMPTY Marker with the 0.7mm tip. It's an empty marker which in my case I mixed the paint, used the AK 3Gen Air series 11830 RLM78, and the thinner in a 60/40 thinner to paint ratio (ratio depends on the paint and the thinner). You will not need much, a total of 5-6ml paint+thinner were enough for me to do the whole model. Shake well and then try some blotches as described also in the video to adjust the mixture if needed and get used to how it works. As you press the marker down it releases the paint through the tip, I would NOT suggest to don't do that directly on the model. Take a piece of cardboard like I did as you can see in one of my photos, push the marker down on the cardboard and then work on the model. It's easier to control the flow this way and avoid any leaks on the model.
Now about the camo blotches, it's up to you, you will see that after you do a couple the hand will just go on it's own. I first did the shape and then painted the inside
TBH I should have done mine a bit more hard edged, they look a bit more round to me on a second look.
Hope that I was of help. 🙂

Doubtingmango
Watching

John Mulhall
Excellent technique. Thank you for sharing. I will have to give that a try.

Rui S
Beautiful work 👍 I agree with Gorby 🤔

Vassilis Chronopoulos 著者
Done, thanks for the tip guys!

Rui S
Welcome to scalemates🙂