database di modelli in scala | gestore della mia scorta
halohead
Daniel (halohead)
DE

Kognakpumpe

Commenti

23 29 July 2020, 20:29
Rui S
I take a seat😎
29 July 2020, 20:39
Daniel
Switching from Defender of the Fleet to Defender of the Reich.

Bought this kit just for fun as it was cheap and I heard its good. And its my favourite WWII fighter. And I esp. like the "Wilde Sau" logo. But since I have basically no clue of the whole thing this wont be too accurate, I gathered a few pics but expect some artistic freedom😉

First step was the cockpit - quite empty compared to what I normaly deal with but with a bit of weathering will look quite intersting I hope. Used cut out decal parts for the steam gauges which worked flawlessly with tamiya mark fit strong. Next up oils.
29 July 2020, 20:40
Daniel
Hey, Welcome Rui! 👍
29 July 2020, 20:42
Rui S
I've some 1/32 WWII, planes on my stash, so I'm here on the front seat to learn 🙂
29 July 2020, 21:09
Daniel
well, this is my second WWII plane ever, so...maybe we can learn together😉
29 July 2020, 21:18
Rui S
Naahh, you are the airplanes Boss 😄
30 July 2020, 01:00
Slavo Hazucha
Haha, I would strongly disapprove, If I did not have a 32-scale Revell prop plane in my stash for a planned future project myself... 😄

There definitely are nice Revell kits around in this scale (My P-51D surely is, by the look at the ), hope this is one of them - and provides an enjoyable distraction from "usual suspects"...😉
30 July 2020, 11:35
Daniel
Oh slavo, we should start a group build!!! 😄 Just kidding...
We call it "Jet builders confused&lost"

I have heard the same good things about their mustang, and I was tempted...but the innate fear of nmf's kicked in. And I can throw all kinds of weathering stuff on this butcher bird which I think I will enjoy . So far the dry fit leaves me in a very positive mood for this build as well 👍

@rui: allright, ok, but Im gonna treat this like a tank😉
30 July 2020, 14:25
Alan G
Defo following this Daniel. Bit of a JG300 Wilde Sau fan myself....as you can see by my profile pic 🙂
30 July 2020, 14:57
Daniel
Cheers Alan, great to have an expert on board 🙂
30 July 2020, 15:12
Slavo Hazucha
Yeah, definitely, let´s make it a group build... let me see - I have a nice slot here in... 2024... 😄
31 July 2020, 12:18
Daniel
Let me see...2024...hmmm...negative, according to my calculations I've run out of space until then and switched to 1:144 biplanes only😉

Finished the cockpit tub with some wear and tear and also experimented with the kits straps decals. With some masking tape as spacer underneath and some artificial shadow they blend in quite nicely i think
3 August 2020, 07:10
Daniel
Greetings Roland! Welcome! So far thumbs up for this kit, very enjoyable
3 August 2020, 14:10
Slavo Hazucha
Cozy scratched leather sofa..!😉
3 August 2020, 15:37
Daniel
Spent the last days sweating, melting, dehydrating and cursing at wires and stuff - dont know why, but I started plumbing and wiring on this one, must be because I absolutely love this kits engine parts and just needed to add some beauty. Not done yet but mostly.
11 August 2020, 19:48
Daniel
@ Roland: What? Nooooooooooooooooooooooo 😮 😄
11 August 2020, 19:49
Clifford Keesler
Very nice, makes me want to start mine.
11 August 2020, 20:47
Rui S
Great detail work. 👍 Nice you notice the gaps are for real, still in time😎
11 August 2020, 21:09
Slavo Hazucha
Ah, things are moving on here - a lovely scale-copy of the best-sounding WW2 engines - everybody says Merlin, but I have a soft spot for the FW-190 signature sound. Some nice enhancements too 👍 - all just for some fun under the cowling, or are you going for an open one?
11 August 2020, 22:53
Alan G
Coming alone very nicely
12 August 2020, 16:30
Daniel
Clifford, Rui, Slavo and Alan - many thanks mates!

@Clifford: Cool, join in: I got a groupbuild with slavo going - it ends 2024 😄😉
@ Rui: yeah, phew...they should definately note that in the instructions
@slavo: Yes and No...My plan is: magnets! (Oh here we go again^^) From my first dry fit it looks like its possible
12 August 2020, 17:31
Daniel
ah, yes and I am with you on bmw 801>merlin sound. Best sounding engine of world war II for me is the corsair though, enhanced by whistling
12 August 2020, 17:33
Clifford Keesler
I will see if I can dust mine off, and grab a few aftermarket goodies.
12 August 2020, 21:26
Daniel
Some progress made between updates, it's fun to paint these luftwaffe camos
@Clifford: 👍 Go for it, its a quite relaxing build (if I exclude all the unnecesary pipes and wires)
5 September 2020, 20:52
Clifford Keesler
I plan on building mine as soon as I finish this pig of a Hasegawa F-14.
6 September 2020, 01:06
Slavo Hazucha
Good to see the engine is not sentenced to solitary confinement in eternal darkness! 🙂 Especially the splendid rusty exhaust deserve an open display 👍

The fishing line solution looks smart & I also quite like the oil-speckled inside of the cowling - end of story there, or just a warm-up in this department?😉
6 September 2020, 07:00
Daniel
@ clifford: Ah, then this will be very good to calm the nerves afterwards 🙂

@slavo: yep, would be a shame to hide the part that consumed most of the build time 🙂 so far that's it for the engine I guess unless you have cool ideas?
Will maybe add some fresh oil to parts with glossy varnish, also some fake screws to the black caps maybe - but first I'll concentrate on the exterior now
6 September 2020, 09:52
Clifford Keesler
Excellent work, I love the wiring and paint work.
7 September 2020, 23:55
Neuling
I agree with Clifford.
8 September 2020, 09:07
Slavo Hazucha
Daniel I did not mean the engine itself, that just looks splendid resting in place - the question was about inside of the open cowling panel - I found the black speckling got my attention, something I would not consider making it on the outside of an aircraft, which is my usual zone of attention... 🙂

I was wondering if the posable panel is done (which it is perfectly entitled to be AS-IS), or if you plan to authorize further action there. If you do, I´d imagine some thermal/soot, even corrosion/paint-burn (?) based effect where it almost touches the exhausts when closed could be interesting... I IMAGINE that, not claiming to talk out of experience/actual historical knowledge 😄
8 September 2020, 11:50
Daniel
Roland, Clifford, Neuling and Slavo - thanks a lot guys!
@Roland: Absolutely, a putty-free, tear-free and sweat-free Kit. No blood as well so far.
@Slavo: Great idea, didnt really think of this! since this build is not aiming for historical or technical accuracy but just for fun and the looks I will definetely google "burned paint" in a few minutes and develop a plan 🙂

other than that I am currently decaling, nothing interesting to report, revells decals work well as expected 🙂
19 September 2020, 09:09
James C
Looking fantastic! 👍
19 September 2020, 17:45
Clifford Keesler
That is looking really nice Daniel, I love it.
19 September 2020, 20:59
Daniel
James and Clifford, thanks! glad you like her

I put some first wear and tear on it now, experimented with water colors a bit which was new territorry and theres room for improvement. Hope I can find some time over the weekend to do some more, fuel stains, mud flying around and better exhaust smoke stains are on the menu
9 October 2020, 11:54
Spanjaard
looks great
9 October 2020, 13:50
Slavo Hazucha
The Boar has been in some melee! 🙂 👍

Very nice weathering, particularly the "acid" effects on the wings! - makes the surface really believable. Don't know how you make these, no ideas apart from "simulated thinner accident" 😄 Good going!
9 October 2020, 14:58
Clifford Keesler
Very nice looking.
9 October 2020, 19:17
Lyndon Fisher
Magic. You must be proud. Well done.
9 October 2020, 19:38
Daniel
Thx Spanjaard, Slavo, Clifford and Lyndon!

I gave her the whole oil treatment now, meaning dead insects (mainly rhino beetles) on the hood, exhaust stains, fuel leaks, some streaks and a thin dust film all over. Also broke a wheel while doing so...dang it! Tomorrow mud on the underside+wheels and reconstruction

The "acid effect" developed from my first steps with water color and is no magic at all and needs no aggressive thinner: I take white thinned watercolor on a brush and make a little puddle, when it dries: Voila, a white outline appears, same as lime stains on the sink really. Then I darkened the outline with a pencil for 3Deffect- done. Dont think these ever appeared on the real thing but I like the look of it🙂
10 October 2020, 19:25
Michael Phillips
So awesome man! That is some sublime weathering indeed. Looking forward to seeing the final rollout!
10 October 2020, 20:15
Clifford Keesler
Me too.
11 October 2020, 00:37
Daniel
Many thanks mates, it wont be long!
12 October 2020, 06:20
Slavo Hazucha
Stepped into some poo-poo on the taxi-run it seems😉 😄 There definitely aspects I miss by doing modern jets only - even Soviet ones... nice!
12 October 2020, 15:40
Daniel
Its only a bit of wet clay! I swear!^^
Mud is a first for me as well, I am sure there are more elegant methods utilizing certain spanish weathering products but the trusty oils in thick dabbing are looking good enough for me as well. Now Im letting this dry for some time before I go into final assembly. Mean while I am doing a little jump in the timeline and took my F-35 out of its dusty box. Have to change my mindset now, no poo poo on this one 🙂
13 October 2020, 22:11
Daniel
Nearly finished now, was able to position the yellow doors with a tiny magnet so they can still swing open. Hope to take some rollout pics this weekend, stay tuned 🙂
27 October 2020, 20:08
Clifford Keesler
Stunning sir, well done. Otherwise, I LIKE IT!!!!!!! LOL.
28 October 2020, 00:52
Daniel
Clifford! Merci, glad you do 🙂
28 October 2020, 10:44
Daniel
trying my luck at some dirtstrip-building, I've never been further away from my usual carrier builds^^
1 November 2020, 15:52
Daniel
Finished! leaving you with the usual teaser pic, rollout coming soon 🙂
3 November 2020, 18:06
Daniel
Fwiends, nice weather, finally!
thanks for following, your kind comments+likes!
Pics here:
FW 190 A-8/R11 | Album by halohead (1:32)
7 November 2020, 14:49
Alan G
That turned out fantastic Daniel. Hope mine looks as good when finished
7 November 2020, 14:51
Daniel
Thanks alan, also for providing inspiration on engine enhancement! I look forward to yours 👍
7 November 2020, 18:30

Project info

54 immagini
1:32
Completato
1:32 Focke Wulf Fw190 A-8, A-8/R11 Nightfighter (Revell 03926)
Focke-Wulf Fw 190A-8/R11
3R Wehrmacht Luftwaffe (German Air Force 1935-1945)
2./JG 301 W.Nr.500666/White 9
Giugno 1944 World War 2 - Erfurt-Nord
RLM74 RLM75 RLM76 RLM27
 

Tutti gli album

Visualizza tutti gli album »